6155M

Inside rear mirror

The additional rear view mirror is installed on the right-hand side of the rear window. When the window is open, the mirror provides an excellent view of the swinging drawbar and rear-end attachments.  The mirror is adjustable for individual operators.

The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:

• BRE10015 — Cell phone mount
• BRE10255 — Tablet mount
• RE343680 — Accessory mounting bracket

To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.

 

The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.

Order oil lines and lever according to tractor specification in addition.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

Order oil lines and lever according to tractor specification in addition.

The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.

Order oil lines and lever according to tractor specification in addition.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.

This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.

NOTE: For tractors up to SN9771392.

This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.

Order software kit AL220192, oil lines and lever according to tractor specification in addition.

These parts are required to retrofit E-ICV on the tractor.

Joystick with gear shifting function.

Please order software AL233342 in addition.

Joystick without gear shifting function.

Please order software AL233343 in addition.

 

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.

These parts are required to retrofit E-ICV on the tractor.

They are required to retrofit midstack SCVs.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.

Order software kit AL220192, oil lines and lever according to tractor specification.

 

Part number	Installation instructions	Description	Compatible models
BL16083	MHM1768	Mechanical midstack valve, two function	6110M – 6120M
BL16084	MHM1768	Mechanical midstack valve, three function	6110M – 6120M
BL16085	MHM1769	Electrical midstack valve, two function	6110M – 6120M
BL16086	MHM1769	Electrical midstack valve, three function	6110M – 6120M
BL16087	MHM1770	E-ICV upgrade kit from two to three valves	6110M – 6195M
BL16103	MHM1769	Electrical parts, wiring harness for electrical midstack retrofit	6110M – 6120M
BL16182	MHM1770	M-ICV Upgrade kit from two to three valves	6110M – 6195M
BL16196	MHM1768	Joystick, M-ICV, three function and D / LSS / GSS / R	6110M – 6195M
BL16201	MHM1768	Joystick, M-ICV, three function and D / LSS / R	6110M – 6195M
BL16235	MHM1834	E-ICV Joystick	6110M – 6195M
BL16236	MHM1834	E-ICV Joystick	6110M – 6195M
BL16206	MHM1822	Mechanical midstack valve, three function	6130M – 6195M
BL16205	MHM1822	Mechanical midstack valve, two Function	6130M – 6195M
BL16207	MHM1823	Electrical midstack valve, two function	6130M – 6195M
BL16208	MHM1823	Electrical midstack valve, three function	6130M – 6195M
BL16552	MHM1823	Electrical parts, wiring harness for electrical midstack retrofit	6130M – 6195M
BL16300	MHM1822	Oil lines, ICV, PC, Position 3, Tier 4	6110M – 6140M
BL16301	MHM1822	Oil lines, ICV, PC, Position 4, Tier 4	6110M – 6140M
BL16302	MHM1822	Oil lines, ICV, PFC, Tier 4	6110M – 6140M
BL16303	MHM1822	Oil lines, ICV, PC, Position 3, Tier 4	6140M – 6145M
BL16304	MHM1822	Oil lines, ICV, PC, Position 4, Tier 4	6140M – 6145M
BL16305	MHM1822	Oil lines, ICV, PFC, Tier 4	6140M – 6145M
BL16306	MHM1822	Oil lines, ICV, Tier 4	6155M
BL16307	MHM1822	Oil lines, ICV, Tier 4	6175M – 6195M
BL16308	MHM1852	Oil lines, ICV, PC, Position 3, Tier 2	6110M – 6140M
BL16309	MHM1852	Oil lines, ICV, PC, Position 4, Tier 2	6110M – 6140M
BL16310	MHM1852	Oil lines, ICV, PFC, Tier 2	6110M – 6140M
BL16311	MHM1852	Oil lines, ICV, PFC, Tier 2	6140M – 6145M
BL16312	MHM1852	Oil lines, ICV, PC, Position 3, Tier 2	6140M – 6145M
BL16313	MHM1852	Oil lines, ICV, PC, Position 4, Tier 2	6140M – 6145M
BL16314	MHM1852	Oil lines, ICV, Tier 2	6155M
BL16315	MHM1852	Oil lines, ICV, Tier 2	6175M – 6195M
BL16316	MHM1852	Mechanical midstack valve, two function	6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M
BL16317	MHM1852	Mechanical midstack valve, three function	6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M
BL16772	MHM1770	E-ICV upgrade from two to three	6110M – 6195M

To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.

 

The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.

Order oil lines and lever according to tractor specification in addition.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

Order oil lines and lever according to tractor specification in addition.

The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.

Order oil lines and lever according to tractor specification in addition.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.

This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.

NOTE: For tractors up to SN9771392.

This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.

Order software kit AL220192, oil lines and lever according to tractor specification in addition.

These parts are required to retrofit E-ICV on the tractor.

Joystick with gear shifting function.

Please order software AL233342 in addition.

Joystick without gear shifting function.

Please order software AL233343 in addition.

 

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.

The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.

These parts are required to retrofit E-ICV on the tractor.

They are required to retrofit midstack SCVs.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.

Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.

Order software kit AL220192, oil lines and lever according to tractor specification.

 

Part number	Installation instructions	Description	Compatible models
BL16083	MHM1768	Mechanical midstack valve, two function	6110M – 6120M
BL16084	MHM1768	Mechanical midstack valve, three function	6110M – 6120M
BL16085	MHM1769	Electrical midstack valve, two function	6110M – 6120M
BL16086	MHM1769	Electrical midstack valve, three function	6110M – 6120M
BL16087	MHM1770	E-ICV upgrade kit from two to three valves	6110M – 6195M
BL16103	MHM1769	Electrical parts, wiring harness for electrical midstack retrofit	6110M – 6120M
BL16182	MHM1770	M-ICV Upgrade kit from two to three valves	6110M – 6195M
BL16196	MHM1768	Joystick, M-ICV, three function and D / LSS / GSS / R	6110M – 6195M
BL16201	MHM1768	Joystick, M-ICV, three function and D / LSS / R	6110M – 6195M
BL16235	MHM1834	E-ICV Joystick	6110M – 6195M
BL16236	MHM1834	E-ICV Joystick	6110M – 6195M
BL16206	MHM1822	Mechanical midstack valve, three function	6130M – 6195M
BL16205	MHM1822	Mechanical midstack valve, two Function	6130M – 6195M
BL16207	MHM1823	Electrical midstack valve, two function	6130M – 6195M
BL16208	MHM1823	Electrical midstack valve, three function	6130M – 6195M
BL16552	MHM1823	Electrical parts, wiring harness for electrical midstack retrofit	6130M – 6195M
BL16300	MHM1822	Oil lines, ICV, PC, Position 3, Tier 4	6110M – 6140M
BL16301	MHM1822	Oil lines, ICV, PC, Position 4, Tier 4	6110M – 6140M
BL16302	MHM1822	Oil lines, ICV, PFC, Tier 4	6110M – 6140M
BL16303	MHM1822	Oil lines, ICV, PC, Position 3, Tier 4	6140M – 6145M
BL16304	MHM1822	Oil lines, ICV, PC, Position 4, Tier 4	6140M – 6145M
BL16305	MHM1822	Oil lines, ICV, PFC, Tier 4	6140M – 6145M
BL16306	MHM1822	Oil lines, ICV, Tier 4	6155M
BL16307	MHM1822	Oil lines, ICV, Tier 4	6175M – 6195M
BL16308	MHM1852	Oil lines, ICV, PC, Position 3, Tier 2	6110M – 6140M
BL16309	MHM1852	Oil lines, ICV, PC, Position 4, Tier 2	6110M – 6140M
BL16310	MHM1852	Oil lines, ICV, PFC, Tier 2	6110M – 6140M
BL16311	MHM1852	Oil lines, ICV, PFC, Tier 2	6140M – 6145M
BL16312	MHM1852	Oil lines, ICV, PC, Position 3, Tier 2	6140M – 6145M
BL16313	MHM1852	Oil lines, ICV, PC, Position 4, Tier 2	6140M – 6145M
BL16314	MHM1852	Oil lines, ICV, Tier 2	6155M
BL16315	MHM1852	Oil lines, ICV, Tier 2	6175M – 6195M
BL16316	MHM1852	Mechanical midstack valve, two function	6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M
BL16317	MHM1852	Mechanical midstack valve, three function	6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M
BL16772	MHM1770	E-ICV upgrade from two to three	6110M – 6195M

Sun-glare prevention

A sun visor and a front and rear roller blind are available for improved operator visibility on sunny days, by blocking the sun's bright light and reducing glare.

 

NOTE: Not available with low-clearance cab

The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:

• BRE10015 — Cell phone mount
• BRE10255 — Tablet mount
• RE343680 — Accessory mounting bracket

Cold start packages

The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.

Advantages: Better tempering in cold temperatures.

Cold start package I

• This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (not with code 8747)

Cold start package II

• This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (code 8747)

Cold start package I, engine only

Cold start package II, 110 V, 4-cylinder (Tier 2)

Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)

Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)

Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)

Cold start package upgrade from one to two

NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.

Cold start package, engine heater (4-cylinder) NA

Cold start package, engine heater (6-cylinder)

Cold start package, transmission heater NA

Cold start package, PFC charge pump heater, NA

Cold start package preparation, NA

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.

Fuel heating device

For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.

For very low outside temperatures, the tractor can be equipped with a fuel preheating device.

NOTE: Only for Tier 2 engines

 

Part number	Installation instructions	Description	Compatible models
BL15427	---	Cold start package II, 110 V, 4-cylinder (Tier 2)	6140M
BL15426	MHM1656	Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)	6110M – 6145M
BL15430	MHM1656	Cold start package I, engine only	6110M – 6145M
BL15466	---	Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump)	6140M – 6195M
BL15548	MHM1655	Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump)	6110M – 6195M
BL16128	MHM1821	Cold start package upgrade from one to two	6110M – 6195M
BL16130	---	Cold start package upgrade from one to two	6110M – 6195M
BL16188	---	Cold start package, engine heater (4-cylinder)	6110M – 6145M (Except 6140M)
BL16189	---	Cold start package, engine heater (6-cylinder)	6140M – 6195M
BL16190	---	Cold start package, transmission heater	6110M - 6195M
BL16193	---	Cold start package, PFC charge pump heater	6110M - 6195M
BL16194	---	Cold start package preparation, NA	6110M - 6195M
BL16204	MHM1821	Cold start package upgrade from one to two	6110M - 6195M
BL15539	MHM1654	Fuel heating device	6110M - 6195M
AL158520	---	Fuel preheater	6155M – 6195M

Cold start packages

The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.

Advantages: Better tempering in cold temperatures.

Cold start package I

• This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (not with code 8747)

Cold start package II

• This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (code 8747)

Cold start package I, engine only

Cold start package II, 110 V, 4-cylinder (Tier 2)

Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)

Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)

Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)

Cold start package upgrade from one to two

NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.

Cold start package, engine heater (4-cylinder) NA

Cold start package, engine heater (6-cylinder)

Cold start package, transmission heater NA

Cold start package, PFC charge pump heater, NA

Cold start package preparation, NA

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.

Fuel heating device

For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.

For very low outside temperatures, the tractor can be equipped with a fuel preheating device.

NOTE: Only for Tier 2 engines

 

Part number	Installation instructions	Description	Compatible models
BL15427	---	Cold start package II, 110 V, 4-cylinder (Tier 2)	6140M
BL15426	MHM1656	Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)	6110M – 6145M
BL15430	MHM1656	Cold start package I, engine only	6110M – 6145M
BL15466	---	Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump)	6140M – 6195M
BL15548	MHM1655	Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump)	6110M – 6195M
BL16128	MHM1821	Cold start package upgrade from one to two	6110M – 6195M
BL16130	---	Cold start package upgrade from one to two	6110M – 6195M
BL16188	---	Cold start package, engine heater (4-cylinder)	6110M – 6145M (Except 6140M)
BL16189	---	Cold start package, engine heater (6-cylinder)	6140M – 6195M
BL16190	---	Cold start package, transmission heater	6110M - 6195M
BL16193	---	Cold start package, PFC charge pump heater	6110M - 6195M
BL16194	---	Cold start package preparation, NA	6110M - 6195M
BL16204	MHM1821	Cold start package upgrade from one to two	6110M - 6195M
BL15539	MHM1654	Fuel heating device	6110M - 6195M
AL158520	---	Fuel preheater	6155M – 6195M

Cold start packages

The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.

Advantages: Better tempering in cold temperatures.

Cold start package I

• This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (not with code 8747)

Cold start package II

• This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (code 8747)

Cold start package I, engine only

Cold start package II, 110 V, 4-cylinder (Tier 2)

Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)

Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)

Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)

Cold start package upgrade from one to two

NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.

Cold start package, engine heater (4-cylinder) NA

Cold start package, engine heater (6-cylinder)

Cold start package, transmission heater NA

Cold start package, PFC charge pump heater, NA

Cold start package preparation, NA

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.

Fuel heating device

For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.

For very low outside temperatures, the tractor can be equipped with a fuel preheating device.

NOTE: Only for Tier 2 engines

 

Part number	Installation instructions	Description	Compatible models
BL15427	---	Cold start package II, 110 V, 4-cylinder (Tier 2)	6140M
BL15426	MHM1656	Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)	6110M – 6145M
BL15430	MHM1656	Cold start package I, engine only	6110M – 6145M
BL15466	---	Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump)	6140M – 6195M
BL15548	MHM1655	Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump)	6110M – 6195M
BL16128	MHM1821	Cold start package upgrade from one to two	6110M – 6195M
BL16130	---	Cold start package upgrade from one to two	6110M – 6195M
BL16188	---	Cold start package, engine heater (4-cylinder)	6110M – 6145M (Except 6140M)
BL16189	---	Cold start package, engine heater (6-cylinder)	6140M – 6195M
BL16190	---	Cold start package, transmission heater	6110M - 6195M
BL16193	---	Cold start package, PFC charge pump heater	6110M - 6195M
BL16194	---	Cold start package preparation, NA	6110M - 6195M
BL16204	MHM1821	Cold start package upgrade from one to two	6110M - 6195M
BL15539	MHM1654	Fuel heating device	6110M - 6195M
AL158520	---	Fuel preheater	6155M – 6195M

Cold start packages

The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.

Advantages: Better tempering in cold temperatures.

Cold start package I

• This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (not with code 8747)

Cold start package II

• This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (code 8747)

Cold start package I, engine only

Cold start package II, 110 V, 4-cylinder (Tier 2)

Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)

Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)

Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)

Cold start package upgrade from one to two

NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.

Cold start package, engine heater (4-cylinder) NA

Cold start package, engine heater (6-cylinder)

Cold start package, transmission heater NA

Cold start package, PFC charge pump heater, NA

Cold start package preparation, NA

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.

Fuel heating device

For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.

For very low outside temperatures, the tractor can be equipped with a fuel preheating device.

NOTE: Only for Tier 2 engines

 

Part number	Installation instructions	Description	Compatible models
BL15427	---	Cold start package II, 110 V, 4-cylinder (Tier 2)	6140M
BL15426	MHM1656	Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)	6110M – 6145M
BL15430	MHM1656	Cold start package I, engine only	6110M – 6145M
BL15466	---	Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump)	6140M – 6195M
BL15548	MHM1655	Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump)	6110M – 6195M
BL16128	MHM1821	Cold start package upgrade from one to two	6110M – 6195M
BL16130	---	Cold start package upgrade from one to two	6110M – 6195M
BL16188	---	Cold start package, engine heater (4-cylinder)	6110M – 6145M (Except 6140M)
BL16189	---	Cold start package, engine heater (6-cylinder)	6140M – 6195M
BL16190	---	Cold start package, transmission heater	6110M - 6195M
BL16193	---	Cold start package, PFC charge pump heater	6110M - 6195M
BL16194	---	Cold start package preparation, NA	6110M - 6195M
BL16204	MHM1821	Cold start package upgrade from one to two	6110M - 6195M
BL15539	MHM1654	Fuel heating device	6110M - 6195M
AL158520	---	Fuel preheater	6155M – 6195M

Cold start packages

The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.

Advantages: Better tempering in cold temperatures.

Cold start package I

• This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (not with code 8747)

Cold start package II

• This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
• 174 Ah battery required (code 8747)

Cold start package I, engine only

Cold start package II, 110 V, 4-cylinder (Tier 2)

Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)

Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)

Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)

Cold start package upgrade from one to two

NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.

Cold start package, engine heater (4-cylinder) NA

Cold start package, engine heater (6-cylinder)

Cold start package, transmission heater NA

Cold start package, PFC charge pump heater, NA

Cold start package preparation, NA

Cold start package upgrade from one to two

Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.

Fuel heating device

For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.

For very low outside temperatures, the tractor can be equipped with a fuel preheating device.

NOTE: Only for Tier 2 engines

 

Part number	Installation instructions	Description	Compatible models
BL15427	---	Cold start package II, 110 V, 4-cylinder (Tier 2)	6140M
BL15426	MHM1656	Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)	6110M – 6145M
BL15430	MHM1656	Cold start package I, engine only	6110M – 6145M
BL15466	---	Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump)	6140M – 6195M
BL15548	MHM1655	Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump)	6110M – 6195M
BL16128	MHM1821	Cold start package upgrade from one to two	6110M – 6195M
BL16130	---	Cold start package upgrade from one to two	6110M – 6195M
BL16188	---	Cold start package, engine heater (4-cylinder)	6110M – 6145M (Except 6140M)
BL16189	---	Cold start package, engine heater (6-cylinder)	6140M – 6195M
BL16190	---	Cold start package, transmission heater	6110M - 6195M
BL16193	---	Cold start package, PFC charge pump heater	6110M - 6195M
BL16194	---	Cold start package preparation, NA	6110M - 6195M
BL16204	MHM1821	Cold start package upgrade from one to two	6110M - 6195M
BL15539	MHM1654	Fuel heating device	6110M - 6195M
AL158520	---	Fuel preheater	6155M – 6195M

Cold weather start aids

The optional cold-start packages are recommended for producers who frequently start tractors below -6 degrees Celsius (20 degrees Fahrenheit).

Multi socket strip right door

The multi socket strip provides electrical power for any devices.

Three-terminal power outlet socket

The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.

Multiple socket strap with seven-pin signal socket

The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.

 

Part number	Installation instructions	Description	Compatible models
AL174215	MHM1130	Multi socket strip right door	6110M -6195M
AL203918	MHM868	Three-terminal power outlet socket	6110M - 6195M
AL203919	MHM868	Three-terminal socket for SAE	6110M – 6195M
BL15910	MHM1742	Multiple socket strap with seven -pin signal socket	6110M – 6195M

Multi socket strip right door

The multi socket strip provides electrical power for any devices.

Three-terminal power outlet socket

The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.

Multiple socket strap with seven-pin signal socket

The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.

 

Part number	Installation instructions	Description	Compatible models
AL174215	MHM1130	Multi socket strip right door	6110M -6195M
AL203918	MHM868	Three-terminal power outlet socket	6110M - 6195M
AL203919	MHM868	Three-terminal socket for SAE	6110M – 6195M
BL15910	MHM1742	Multiple socket strap with seven -pin signal socket	6110M – 6195M

Electrical power accessories

An electrical power strip provides six additional outlets for powering monitors or other electrical equipment.

 

Three different adapters may be ordered separately through Parts.

• The 3-ft electrical cord is used for hardwiring electrical components to be used with the power strip. The power strip end has a standard connector.
• The three-way convenience adapter allows three pin electrical connections to be adapted for use with the power strip.
• The cigar lighter outlet adapter can be used for plugging in items such as car charges for cell phones or MP3 players. It does not include a lighter.

Multi socket strip right door

The multi socket strip provides electrical power for any devices.

Three-terminal power outlet socket

The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.

Multiple socket strap with seven-pin signal socket

The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.

 

Part number	Installation instructions	Description	Compatible models
AL174215	MHM1130	Multi socket strip right door	6110M -6195M
AL203918	MHM868	Three-terminal power outlet socket	6110M - 6195M
AL203919	MHM868	Three-terminal socket for SAE	6110M – 6195M
BL15910	MHM1742	Multiple socket strap with seven -pin signal socket	6110M – 6195M

Front and rear axle extensions are available to match different tread settings.

Benefit

- Optimal track width for vegetables or crop growing

- Easy installing of the track extension

- Less set-up time.

Hub extension 60 mm (2.4 in.), front, tread adjustment

NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bo​lt circle diameter (BCD).

Hub extension 94 mm (3.7 in.), front, tread adjustment

Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.

Hub extension 219 mm (8.6 in.), front, tread Adjustment

Tr​ack extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign. ​

 

Part number	Installation instructions	Description	Compatible models
AL156778	MHM804	Hub extension 60 mm (2.4 in.), front, tread adjustment	6110M – 6195M
BL15106	MHM1574	Hub Extension 94 mm (3.7 in.), front, tread adjustment	6110M – 6195M
BL15107	MHM1574	Hub extension 219 mm (8.6 in.), front, tread adjustment	6110M – 6195M

Front and rear axle extensions are available to match different tread settings.

Benefit

- Optimal track width for vegetables or crop growing

- Easy installing of the track extension

- Less set-up time.

Hub extension 60 mm (2.4 in.), front, tread adjustment

NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bo​lt circle diameter (BCD).

Hub extension 94 mm (3.7 in.), front, tread adjustment

Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.

Hub extension 219 mm (8.6 in.), front, tread Adjustment

Tr​ack extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign. ​

 

Part number	Installation instructions	Description	Compatible models
AL156778	MHM804	Hub extension 60 mm (2.4 in.), front, tread adjustment	6110M – 6195M
BL15106	MHM1574	Hub Extension 94 mm (3.7 in.), front, tread adjustment	6110M – 6195M
BL15107	MHM1574	Hub extension 219 mm (8.6 in.), front, tread adjustment	6110M – 6195M

Front and rear axle extensions are available to match different tread settings.

Benefit

- Optimal track width for vegetables or crop growing

- Easy installing of the track extension

- Less set-up time.

Hub extension 60 mm (2.4 in.), front, tread adjustment

NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bo​lt circle diameter (BCD).

Hub extension 94 mm (3.7 in.), front, tread adjustment

Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.

Hub extension 219 mm (8.6 in.), front, tread Adjustment

Tr​ack extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).

​Only for front wheels with 335-mm (13.2-in.) BCD.

If required, please order in addition:

• For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
• For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign. ​

 

Part number	Installation instructions	Description	Compatible models
AL156778	MHM804	Hub extension 60 mm (2.4 in.), front, tread adjustment	6110M – 6195M
BL15106	MHM1574	Hub Extension 94 mm (3.7 in.), front, tread adjustment	6110M – 6195M
BL15107	MHM1574	Hub extension 219 mm (8.6 in.), front, tread adjustment	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Two front fenders

The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.

 

Part number	Installation instructions	Description	Compatible models
BL16219	---	Two front Fenders, 370-mm (14.6-in.) width (regular)	6110M – 6195M
BL16220	---	Two front fenders, 370-mm (14.6-in.) width (large)
BL16221	---	Two front fenders, 420-mm (16.5-in.) width (regular)
BL16222	---	Two front fenders, 420-mm (16.5-in.) width (large)
BL16223	---	Two front fenders, 480-mm (18.9-in.) width (regular)
BL16225	---	Two front fenders, 540-mm (21.3-in.) width (regular)
BL16226	---	Two front fenders, 540-mm (21.3-in.) width (large)
BL16227	---	Two front fenders, 620-mm (24.4-in.) width (large)
BL16228	---	Two front fenders, 620-mm (24.4-in.) width (long)

Base support kit for front fenders, rigid

The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.

 

Part number	Installation instructions	Description	Compatible models
BL16231	---	Base support kit for front fenders, rigid	6110M – 6195M

Base support kit for turnable front fenders

Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.

Turnable front fenders –

• Protect from mud, stones, and debris
• Provide a better turning circle and improved steering angle
• Feature the same steering angle as tractors without front fenders
• Are made from rugged material
• Provide a better view through a clear front windshield

 

Part number	Installation instructions	Description	Compatible models
BL16232	---	Base support kit for turnable front fenders	6110M – 6195M

Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.

Economy front hitch, Category 3N

Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.

• Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
• Continuous lift capacity: 3000 kg (7275.25 Ib)
• Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
• Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
• Category 3N

 

NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.

 

Part number	Installation instructions	Description	Compatible models
BL16750	MHM1896 MHM1827	Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity	6110M – 6195M

Oil Lines, FH

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

Two additional SCV coupler for front hitch

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Seven pin socket, Front hitch

To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.

 

Part number	Installation instructions	Description	Compatible models
BL16281	MHM1827	Oil lines, front hitch	6110M – 6120M
BL16282	MHM1827	Two additional SCV coupler for front hitch	6110M – 6120M
BL16360	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16361	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16601	MHM1827	Seven pin socket, front Hitch	6110M – 6210M
BL16322	MHM1827	Two additional SCV coupler for front hitch	6175M – 6210M
BL16324	MHM1827	Two additional SCV coupler for front hitch	6155M
BL16326	MHM1827	Two additional SCV coupler for front hitch	6140M – 6145M
BL16328	MHM1827	Two additional SCV coupler for front hitch	6110M – 6140M
BL16321	MHM1827	Oil lines, front hitch	6175M – 6210M
BL16323	MHM1827	Oil lines, front hitch	6155M
BL16325	MHM1827	Oil lines, front hitch	6140M – 6145M
BL16327	MHM1827	Oil lines, front hitch	6110M – 6140M

Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.

Economy front hitch, Category 3N

Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.

• Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
• Continuous lift capacity: 3000 kg (7275.25 Ib)
• Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
• Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
• Category 3N

 

NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.

 

Part number	Installation instructions	Description	Compatible models
BL16750	MHM1896 MHM1827	Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity	6110M – 6195M

Oil Lines, FH

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

Two additional SCV coupler for front hitch

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Seven pin socket, Front hitch

To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.

 

Part number	Installation instructions	Description	Compatible models
BL16281	MHM1827	Oil lines, front hitch	6110M – 6120M
BL16282	MHM1827	Two additional SCV coupler for front hitch	6110M – 6120M
BL16360	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16361	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16601	MHM1827	Seven pin socket, front Hitch	6110M – 6210M
BL16322	MHM1827	Two additional SCV coupler for front hitch	6175M – 6210M
BL16324	MHM1827	Two additional SCV coupler for front hitch	6155M
BL16326	MHM1827	Two additional SCV coupler for front hitch	6140M – 6145M
BL16328	MHM1827	Two additional SCV coupler for front hitch	6110M – 6140M
BL16321	MHM1827	Oil lines, front hitch	6175M – 6210M
BL16323	MHM1827	Oil lines, front hitch	6155M
BL16325	MHM1827	Oil lines, front hitch	6140M – 6145M
BL16327	MHM1827	Oil lines, front hitch	6110M – 6140M

Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.

Economy front hitch, Category 3N

Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.

• Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
• Continuous lift capacity: 3000 kg (7275.25 Ib)
• Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
• Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
• Category 3N

 

NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.

 

Part number	Installation instructions	Description	Compatible models
BL16750	MHM1896 MHM1827	Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity	6110M – 6195M

Oil Lines, FH

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

Two additional SCV coupler for front hitch

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Seven pin socket, Front hitch

To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.

 

Part number	Installation instructions	Description	Compatible models
BL16281	MHM1827	Oil lines, front hitch	6110M – 6120M
BL16282	MHM1827	Two additional SCV coupler for front hitch	6110M – 6120M
BL16360	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16361	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16601	MHM1827	Seven pin socket, front Hitch	6110M – 6210M
BL16322	MHM1827	Two additional SCV coupler for front hitch	6175M – 6210M
BL16324	MHM1827	Two additional SCV coupler for front hitch	6155M
BL16326	MHM1827	Two additional SCV coupler for front hitch	6140M – 6145M
BL16328	MHM1827	Two additional SCV coupler for front hitch	6110M – 6140M
BL16321	MHM1827	Oil lines, front hitch	6175M – 6210M
BL16323	MHM1827	Oil lines, front hitch	6155M
BL16325	MHM1827	Oil lines, front hitch	6140M – 6145M
BL16327	MHM1827	Oil lines, front hitch	6110M – 6140M

Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.

Economy front hitch, Category 3N

Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.

• Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
• Continuous lift capacity: 3000 kg (7275.25 Ib)
• Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
• Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
• Category 3N

 

NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.

 

Part number	Installation instructions	Description	Compatible models
BL16750	MHM1896 MHM1827	Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity	6110M – 6195M

Oil Lines, FH

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.

Two additional SCV coupler for front hitch

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Pressure free return, Front hitch

To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.

Seven pin socket, Front hitch

To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.

 

Part number	Installation instructions	Description	Compatible models
BL16281	MHM1827	Oil lines, front hitch	6110M – 6120M
BL16282	MHM1827	Two additional SCV coupler for front hitch	6110M – 6120M
BL16360	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16361	MHM1827	Pressure free return, front hitch	6110M – 6120M
BL16601	MHM1827	Seven pin socket, front Hitch	6110M – 6210M
BL16322	MHM1827	Two additional SCV coupler for front hitch	6175M – 6210M
BL16324	MHM1827	Two additional SCV coupler for front hitch	6155M
BL16326	MHM1827	Two additional SCV coupler for front hitch	6140M – 6145M
BL16328	MHM1827	Two additional SCV coupler for front hitch	6110M – 6140M
BL16321	MHM1827	Oil lines, front hitch	6175M – 6210M
BL16323	MHM1827	Oil lines, front hitch	6155M
BL16325	MHM1827	Oil lines, front hitch	6140M – 6145M
BL16327	MHM1827	Oil lines, front hitch	6110M – 6140M

Center link bracket for monoblock

If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.

 

Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.

 

This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.

Pickup weights monoblock

BL15020 – 1500 kg (3307 lb)

BL15083 – 900 kg (1984 lb)

BL15084 – 1150 kg (2535 lb)

AL204830 – 1800 kg (3968 lb)

 

Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.

 

The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).

 

For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.

 

Part number	Installation instructions	Description	Compatible models
BL15085	MHM1550	Center link bracket for monoblock	6110M – 6195M
BL15020	MHM1550	1500 kg (3307 lb) pickup weight	6110M – 6195M
BL15083	MHM1550	900 kg (1984 lb) pickup weight	6110M – 6195M
BL15084	MHM1550	1150 kg (2535 lb)) pickup weight	6110M – 6195M
AL204830	MHM1550	1800 kg (3968 lb) pickup weight	6110M – 6195M

Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)

The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.

 

Benefits:

• More traction with the right ballasting and easy installation of the weights.

Mounting parts for 6, 8, 10 Quik-Tatch™ weights

The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.

Mounting parts for 12, 14 Quik-Tatch weights

Mounting parts for 16, 18 Quik-Tatch weights

Front weight support, 60 kg (132.3 lb)

Front weight support, 110 kg (242.5 lb)

Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.

20 Front Quik-Tatch weights

Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right​. Thus, 1000-kg (2204.6-lb) can be attached.

Weight, front suitcase 43-kg (95-lb) quantity of one

For front mount ballasting. High gloss green paint. North American applications. ​

 

Part number	Installation instructions	Description	Compatible models
AL119964	---	Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)	6110M – 6195M
AL119967	---	Mounting parts for 6, 8, 10 Quik-Tatch weights	6110M – 6195M
AL119968	---	Mounting parts for 12, 14 Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
AL176563	---	Front weight support, 60 kg (132.3 lb)	6110M – 6195M
AL176565	---	Front weight support, 110 kg (242.5 lb)	6110M – 6195M
AL71258	---	20 Front Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
BL15020	MHM1550	Pick up weight 1500-kg (3307-lb) monoblock	6110M – 6195M
BL15083	MHM1550	Pick up weight 900-kg (1984-lb) monoblock	6110M – 6195M
BL15084	MHM1550	Pick up weight, 1150-kg (2535-lb) monoblock	6110M – 6195M
AL204830	MHM1550	Pick up weight 1800-kg (3968-lb) monoblock	6110M – 6195M
R127764	---	Weight, front suitcase 43-kg (95-lb) quantity of one	6110M – 6195M

Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)

The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.

 

Benefits:

• More traction with the right ballasting and easy installation of the weights.

Mounting parts for 6, 8, 10 Quik-Tatch™ weights

The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.

Mounting parts for 12, 14 Quik-Tatch weights

Mounting parts for 16, 18 Quik-Tatch weights

Front weight support, 60 kg (132.3 lb)

Front weight support, 110 kg (242.5 lb)

Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.

20 Front Quik-Tatch weights

Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right​. Thus, 1000-kg (2204.6-lb) can be attached.

Weight, front suitcase 43-kg (95-lb) quantity of one

For front mount ballasting. High gloss green paint. North American applications. ​

 

Part number	Installation instructions	Description	Compatible models
AL119964	---	Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)	6110M – 6195M
AL119967	---	Mounting parts for 6, 8, 10 Quik-Tatch weights	6110M – 6195M
AL119968	---	Mounting parts for 12, 14 Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
AL176563	---	Front weight support, 60 kg (132.3 lb)	6110M – 6195M
AL176565	---	Front weight support, 110 kg (242.5 lb)	6110M – 6195M
AL71258	---	20 Front Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
BL15020	MHM1550	Pick up weight 1500-kg (3307-lb) monoblock	6110M – 6195M
BL15083	MHM1550	Pick up weight 900-kg (1984-lb) monoblock	6110M – 6195M
BL15084	MHM1550	Pick up weight, 1150-kg (2535-lb) monoblock	6110M – 6195M
AL204830	MHM1550	Pick up weight 1800-kg (3968-lb) monoblock	6110M – 6195M
R127764	---	Weight, front suitcase 43-kg (95-lb) quantity of one	6110M – 6195M

Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)

The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.

 

Benefits:

• More traction with the right ballasting and easy installation of the weights.

Mounting parts for 6, 8, 10 Quik-Tatch™ weights

The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.

Mounting parts for 12, 14 Quik-Tatch weights

Mounting parts for 16, 18 Quik-Tatch weights

Front weight support, 60 kg (132.3 lb)

Front weight support, 110 kg (242.5 lb)

Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.

20 Front Quik-Tatch weights

Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right​. Thus, 1000-kg (2204.6-lb) can be attached.

Weight, front suitcase 43-kg (95-lb) quantity of one

For front mount ballasting. High gloss green paint. North American applications. ​

 

Part number	Installation instructions	Description	Compatible models
AL119964	---	Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)	6110M – 6195M
AL119967	---	Mounting parts for 6, 8, 10 Quik-Tatch weights	6110M – 6195M
AL119968	---	Mounting parts for 12, 14 Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
AL176563	---	Front weight support, 60 kg (132.3 lb)	6110M – 6195M
AL176565	---	Front weight support, 110 kg (242.5 lb)	6110M – 6195M
AL71258	---	20 Front Quik-Tatch weights	6110M – 6195M
AL82932	---	Mounting parts for 16, 18 Quik-Tatch weights	6110M – 6195M
BL15020	MHM1550	Pick up weight 1500-kg (3307-lb) monoblock	6110M – 6195M
BL15083	MHM1550	Pick up weight 900-kg (1984-lb) monoblock	6110M – 6195M
BL15084	MHM1550	Pick up weight, 1150-kg (2535-lb) monoblock	6110M – 6195M
AL204830	MHM1550	Pick up weight 1800-kg (3968-lb) monoblock	6110M – 6195M
R127764	---	Weight, front suitcase 43-kg (95-lb) quantity of one	6110M – 6195M

Center link bracket for monoblock

If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.

 

Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.

 

This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.

Pickup weights monoblock

BL15020 – 1500 kg (3307 lb)

BL15083 – 900 kg (1984 lb)

BL15084 – 1150 kg (2535 lb)

AL204830 – 1800 kg (3968 lb)

 

Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.

 

The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).

 

For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.

 

Part number	Installation instructions	Description	Compatible models
BL15085	MHM1550	Center link bracket for monoblock	6110M – 6195M
BL15020	MHM1550	1500 kg (3307 lb) pickup weight	6110M – 6195M
BL15083	MHM1550	900 kg (1984 lb) pickup weight	6110M – 6195M
BL15084	MHM1550	1150 kg (2535 lb)) pickup weight	6110M – 6195M
AL204830	MHM1550	1800 kg (3968 lb) pickup weight	6110M – 6195M