6155M
Tractor
- Engine HP: 172 Max | 155 Rated
- John Deere FT4 PowerTech™ engine combines performance and fluid economy
- Transmission options: PQT, AQT, or CQT
- Available in cab or open-station configuration
- 30-GPM pressure-flow compensated system
View Product Brochure
Features
There’s no denying you spend plenty of time in the cab. Make it quality time with the redesigned 6M Tractor cab. Guided by best-practice ergonomic principles and four different cab packages to customize the way you work, you’ll enjoy a more productive, comfortable, and efficient experience. All 6M Tractors will come standard with a digital cornerpost display, eliminating the previous instrument cluster behind the steering wheel. This easy-to-read digital display gives you access to all critical machine data and settings in one place. Additionally, premium options have been made available to let you customize your 6M to fit any operation including:
- Mechanical or electrical reconfigurable joystick with PowrReverser™ functionality
- Quickly and easily change directions with the push of a button while doing loader work
- Compact CommandARM™ console
- Swivel in your seat and have all the controls at your fingertips
- Triple-Link Suspension (TLSTM)
- Increase both transport and field productivity with superior stability, ride, and comfort with a suspended front axle
- Mechanical cab suspension
- Panoramic roof
Bluetooth is a trademark of Bluetooth SIG, Inc.
If you are looking for a low-cost integrated guidance system, 6M Tractors come equipped with AutoTrac guidance using the digital cornerpost display. For this straight track only feature, you no longer need an additional display or activation. To utilize AutoTrac on the cornerpost display, simply order your 6M Tractor as AutoTrac Ready (code 1758) and install a StarFire™ 6000 Receiver (code 1881). While AutoTrac makes straight passes, you can focus more on job quality and leave the field less fatigued after a long day of mowing, spraying, or other field work.
Benefits of AutoTrac on the cornerpost display include:
- Easy to access, setup, and initiate
- Eliminate implement overlap and optimize machine efficiency
- Reduce operator fatigue
- Less cost than adding an additional display and activation
If you need more capabilities, like different track types or documentation, John Deere also offers a 4240 and 4640 Universal Display. These displays enable AutoTrac guidance that provides enhanced usability, increased performance, and greater operator choice. Additional benefits include:
- On-screen mapping
- Documentation
- Section Control
The 6110M through 6140M Tractors come equipped with Intelligent Power Management (IPM). IPM provides a 14.9-kW (20-hp) boost for operations that use rear power take-off (PTO) in high-power applications or in transport. Benefits of IPM include improved productivity, increased acceleration, and the ability to maintain desired transport speeds. The requirements for IPM to be active include:
- Transport applications: The minimum ground speed where additional power begins to be applied for all models is 15 km/h (9.3 mph), assuming the engine is already fully loaded. Ramp-up to full additional power occurs as speed continues to increase.
- PTO activation: Power must be sensed going through the PTO drive clutch by the electronic system. When using PTO-driven implements, engine power is increased gradually when ground speed exceeds 1 km/h (0.6 mph) if the electronic system detects a correspondingly high PTO power requirement. Full power becomes available from a speed of 2.5 km/h (1.5 mph).
All 6M models come with the option to upgrade from mechanical to electronically controlled SCVs. To control a rear implement, up to four electrical SCVs or three electrical SCVs plus power beyond can be ordered. Each SCV features four positions – neutral, raise, lower, and float. The electrical SCVs are fully adjustable with the digital cornerpost display. Additionally, you can choose what SCVs are right for your operation with the following combinations of SCVs:
With Compact CommandARM™ console:
- Up to four electrical SCVs possible or three plus power beyond
- Loader packages with electrical joystick available
- Mechanical SCVs are not available
With right-hand console:
- Up to three mechanical SCVs possible plus power beyond
- Up to four electrical SCVs possible or three plus power beyond
- Combination of two electrical and one or two mechanical SCVs available
- Loader packages with maximum of three mechanical SCVs available
- Loader packages with electrical joystick available
For all 6M Series Tractors, an optional integrated John Deere Category 3N front hitch with hook-end draft links can be factory installed. The high lift capacity of 4400 kg (9,700 lb) maximum and 3300 kg (7,275 lb) through the full lift range ensures compatibility with heavy front implements and ballasts. If the tractor is not equipped with Triple-Link Suspension (TLS™), an accumulator will be installed to ensure driving comfort. The front hitch allows:
- Maximum uptime with quick and easy changing from folded to working position
- The operator to be highly flexible with the front ballast
- Optional availability of integrated front power take-off (PTO)
- Counterclockwise rotating PTO (view from front)
Lights on the 6M Series Tractors have been positioned and designed to provide maximum visibility to the front, sides, and rear to increase productivity in any operating conditions. The updated cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees. You have two options to upgrade lighting with the Economy and Premium light packages available:
- Economy light package
- Two additional work lights in the front, side, and rear
- Premium light package
- Two additional work lights in the front, side, and rear
- All lights are LED lights
Both packages require the 14-V/150-amp alternator (code 8741) and 12-V/174-amp-hr battery (code 8747).
Operators looking to remotely access critical machine data and manage their fleet in one place can with JDLink. JDLink is the telematics system from John Deere that connects all machines in the field with office and mobile devices. The technology is based on a Modular Telematics Gateway (MTG) controller that collects and transmits data via a cellular network using selective data points in near-real time. With JDLink, operators can:
- Remotely view information from a computer, phone, or tablet
- Access machine data like engine hours and fuel level
- Track machine location and history
- Set up and manage geofence and curfews
- Manage maintenance plans and alerts
6M Series Tractors have been redesigned to meet stringent reliability and serviceability requirements. Daily service requirements have been reduced and are simple to accomplish with improved accessibility to the engine. All 6M models are equipped with a 60-degree hood, and the 6110M and 6120M feature removable side panels, allowing easy access to reduce time and make serviceability even easier.
These features allow you to quickly and easily check parts like:
- Engine oil filter
- Engine fuel filter
- Coolant recovery tank
- Air cleaner
Additionally, the oil dipstick on the 6110M and 6120M allows you to check the engine oil level without opening the hood.
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
- Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
- Saves time by remotely viewing in-cab displays, reducing trips to the machine
- Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
- Connects experts with the information needed to respond to downtime faster and prevent it altogether
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
Specs & Compare
Key Specs | 6155M Current Model |
Engine description | John Deere PowerTech™ PVS |
Engine displacement | 6.8 L 415 cu in. |
Rated engine power | 114 kW 155 hp |
Maximum engine power | 126 kW 172 hp |
Rated PTO power (hp SAE) | 92 kW 125 hp |
Maximum PTO power | At 1000 PTO rpm: 100 kW 136 hp |
Transmission type | Standard: John Deere 20-speed PowrQuad™ Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad™ Plus 40 km/h John Deere 20-speed CommandQuad™ Plus 40 km/h Creeper (PowrQuad Plus and AutoQuad Plus) |
Hydraulic pump rated output | Standard: 45-cc pump: 114 L/min 30 gpm |
Rear hitch category (SAE designation) | 3N/3 |
Base machine weight | 6700 kg 14,770 lb |
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) | |
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) | |
Engine specifications | |
Description | John Deere PowerTech PVS |
Engine type | 6068HL555 |
Engine family | JDXL06.8324 |
Rated speed | 2100 rpm |
Aspiration | Variable geometry turbocharger |
Cylinders liners | |
Emission level | Stage V |
After treatment type | Lifetime diesel particle filter (DPF), diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhuast fluid (DEF) |
Displacement | 6.8 L 415 cu in. |
Engine performance | |
Rated power | 114 kW 155 hp |
Rated PTO power (hp SAE) | 92 kW 125 hp |
Maximum PTO power | At 1000 PTO rpm: 100 kW 136 hp |
Power boost | 10 percent |
Maximum engine power | 126 kW 172 hp |
Engine peak torque | At 1600 U/min: 726 Nm 535.47 lb-ft |
PTO torque rise | 40 percent |
Air cleaner type | |
Drawbar power | |
Fuel injection system and control | |
Intelligent Power Management (IPM) | |
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) | |
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) | |
Transmission | |
Type | Standard: John Deere 20-speed PowrQuad Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad Plus 40 km/h John Deere 20-speed CommandQuad Plus 40 km/h Creeper (PowrQuad Plus and AutoQuad Plus) |
Reverser | Electronic left-hand reverser |
Clutch; wet/dry | |
Creeper | Optional |
Hydraulic system | |
Type | Standard: Pressure-and-flow compensated (PFC) system with Load Sensing function |
Pump rated output | Standard: 45-cc pump: 114 L/min 30 gpm |
Available flow at a single rear SCV | |
Available flow at front SCVs | |
Number of rear selective control valves (SCVs) | Standard: Two ISO couplers Optional: Two to four ISO couplers |
Number of mid selective control valves (SCVs) | Up to three |
Number of front selective control valves (SCVs) | |
Joystick SCV control | Mechanical/electrical |
SCV control | |
Auxiliary hydraulic features | |
Rear hitch | |
Hitch draft control load sense type | |
Remote control valves available | Standard |
Hitch category (SAE designation) | 3N/3 |
Maximum lift capacity behind lift points | Standard: 6800 kg 14,991.4 lb Optional: 7650 kg 16,865.3 lb |
Lift capacity at standard frame | |
Sensing type | Electronic lower link |
Rear axle differential lock | Electrohydraulically with oil-cooled clutch |
Drawbar | |
Drawbar category | Category 2 |
Maximum vertical load | Road/field use (250-mm extended): 2000 kg 4409.2 lb Field use (350-mm extended): 1400 kg 3086.5 lb Field use (400-mm extended): 1200 kg 2645.5 lb |
Rear power take-off (PTO) | |
Type | Electrohydraulically operated, oil-cooled, multi-disc design Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft |
Engine rpm (at rated PTO speeds) | 540:1997 rpm 1000: 2010 rpm |
Multispeed PTO option availability | |
Ground speed PTO option availability | |
PTO actuation | In-cab switch and external fender-mounted remote control |
Economy PTO speeds | |
Reverse PTO speeds | |
Front hitch | |
Category | 3N |
Electric power | Seven-pin electrical socket |
Standard lift capacity | 4400 kg 9700.3 lb |
Front power take-off (PTO) | Electrohydraulically engaged with oil-cooled, multi-disc design |
PTO speed | 1000 PTO: 1969 rpm |
Rear axle | |
Type | Standard: Rack-and-pinion rear axle - 92-mm (3.6-in.) shaft (2.550-m/8.36-ft length) |
Final drive type | Three planetary gear reduction |
Differential controls | |
Axle type | |
Brakes, type and control | Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat) Park lock: Mechanical transmission park lock Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph]) Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated) |
Rear differential lock | Electrohydraulically with oil-cooled clutch |
Load rating | |
Front axle | |
Type | Standard: MFWD Optional: Two-wheel drive (2WD) Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range) Triple-Link Suspension MFWD with brakes |
Front axle differential lock | Self-locking differential |
Load rating | |
Tires | |
Rear | 710/70R38 (200) |
Wheel tread range | |
Turning radius with brakes | |
Turning radius without brakes | |
Central Tire Inflation System (CTIS) | |
Front | |
Tracks | |
Tread spacing | |
Drive type | |
Track width | |
Mid-rollers | |
Steering | |
Electrical system | |
Alternator size | Standard: 14 V/120 amp Optional: 14 V/150 amp 14 V/200 amp |
Battery options | Standard: 12 V/154 amp-hr Optional: 12 V/174 amp-hr |
Working lights | |
Type of bulb in headlight (Halogen, Zenon, LED) | |
Type of bulb in beacon (Halogen, Zenon, LED) | |
dB(A) rating for backup alarm | |
Total cold cranking amps | |
Operator station | |
Rollover protective structure, OOS | Gearshift location - console/floor Console |
Seat | Standard: Economy seat with mechanical suspension Optional: Standard seat with air suspension |
Cab suspension | Optional: Mechanical Cab Suspension (MCS) |
Instructional seat | Optional |
Display | Cornerpost dispay (right-hand A-post) Functionalty: Performance monitor and individual settings |
Radio | Optional integrated |
Inner cab volume | 2.73 m3 96.41 cu ft |
dB(A) rating | 70 dBA |
Cab glass area | Without roof hatch or panoramic roof: 4.85 m2 52.2 sq ft |
Safety glass rating | |
Front visibility | |
Dimensions | |
Wheelbase | 2765 mm 108.9 in. |
Overall width | 2490 mm 98.03 in. |
Overall length | 4730 mm 186.2 in. |
Overall height | 3030 mm 119.29 in. |
Drawbar clearance | |
Front axle center | Ground clearance: 530 mm 20.9 in. |
Approximate shipping weight, Open;Cab | Cab: 6700 kg 14,770 lb |
Weight | |
Base machine weight | Front axle 2550 kg 5621 lb Rear axle 4150 kg 9149 lb 6700 kg 14,770 lb |
Maximum ballast level | |
Maximum permissible weight | 11,000 kg 24,250 lb |
Capacities | |
Crankcase oil volume | 23.5 L 6.2 U.S. gal. |
Fuel tank | 270 L 71.3 U.S. gal. |
Diesel exhaust fluid (DEF) tank | 16 L 4.2 U.S. gal. |
Cooling system | 27 L 7.1 U.S. gal. |
Transmission-hydraulic system | PowrQuad Plus / AutoQuad Plus: 76 L 20.1 U.S. gal. |
Serviceability | |
Interval for engine oil change | 750 hours |
Interval for hydraulic/transmission oil change | 1500 hours |
Interval for engine coolant change | 6000 hours |
Loaders | |
Loader | 660R |
Lift capacity at full height | Non-self-leveling (NSL): 2564 kg 5652.65 lb Mechanical self-leveling (MSL): 2301 kg 5072.83 lb |
Maximum lift height | NSL/MSL: 4.52 m 177.95 in. |
Leveling type | |
Precision AG | |
Guidance | Optional: AutoTrac™ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display |
Telematic | Optional: JDLink™ |
Remote diagnostics | Optional: JDLink |
Miscellaneous | |
Side slope rating | |
Uphill/downhill slope rating | |
Country of manufacture | Germany |
AutoTrac ready | |
CommandCenter video inputs | |
ISOBUS ready | |
Immobilizer | |
Additional information | |
Brakes | |
Auxiliary brakes | |
Front axle brakes | |
Hydraulic trailer brakes | |
MFWD braking | |
Park lock | |
Pneumatic trailer brakes | |
Primary brake (foot brake) | |
Secondary brake |
Offers & Discounts
Accessories & Attachments
Cab Equipment
Inside rear mirror
The additional rear view mirror is installed on the right-hand side of the rear window. When the window is open, the mirror provides an excellent view of the swinging drawbar and rear-end attachments. The mirror is adjustable for individual operators.
The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:
- BRE10015 — Cell phone mount
- BRE10255 — Tablet mount
- RE343680 — Accessory mounting bracket
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
Sun-glare prevention
A sun visor and a front and rear roller blind are available for improved operator visibility on sunny days, by blocking the sun's bright light and reducing glare.
NOTE: Not available with low-clearance cab
The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:
- BRE10015 — Cell phone mount
- BRE10255 — Tablet mount
- RE343680 — Accessory mounting bracket
Cold Start Packages
Cold start packages
The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.
Advantages: Better tempering in cold temperatures.
Cold start package I
- This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (not with code 8747)
Cold start package II
- This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (code 8747)
Cold start package I, engine only
Cold start package II, 110 V, 4-cylinder (Tier 2)
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)
Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)
Cold start package upgrade from one to two
NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.
Cold start package, engine heater (4-cylinder) NA
Cold start package, engine heater (6-cylinder)
Cold start package, transmission heater NA
Cold start package, PFC charge pump heater, NA
Cold start package preparation, NA
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.
Fuel heating device
For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.
For very low outside temperatures, the tractor can be equipped with a fuel preheating device.
NOTE: Only for Tier 2 engines
Part number |
Installation instructions |
Description |
Compatible models |
BL15427 |
--- |
Cold start package II, 110 V, 4-cylinder (Tier 2) |
6140M |
BL15426 |
MHM1656 |
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump) |
6110M – 6145M |
BL15430 |
MHM1656 |
Cold start package I, engine only |
6110M – 6145M |
BL15466 |
--- |
Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump) |
6140M – 6195M |
BL15548 |
MHM1655 |
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump) |
6110M – 6195M |
BL16128 |
MHM1821 |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16130
|
--- |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16188
|
--- |
Cold start package, engine heater (4-cylinder) |
6110M – 6145M (Except 6140M) |
BL16189 |
--- |
Cold start package, engine heater (6-cylinder) |
6140M – 6195M |
BL16190 |
--- |
Cold start package, transmission heater |
6110M - 6195M |
BL16193
|
--- |
Cold start package, PFC charge pump heater |
6110M - 6195M |
BL16194 |
--- |
Cold start package preparation, NA |
6110M - 6195M |
BL16204 |
MHM1821 |
Cold start package upgrade from one to two |
6110M - 6195M |
BL15539 |
MHM1654 |
Fuel heating device |
6110M - 6195M |
AL158520 |
--- |
Fuel preheater |
6155M – 6195M |
Cold start packages
The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.
Advantages: Better tempering in cold temperatures.
Cold start package I
- This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (not with code 8747)
Cold start package II
- This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (code 8747)
Cold start package I, engine only
Cold start package II, 110 V, 4-cylinder (Tier 2)
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)
Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)
Cold start package upgrade from one to two
NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.
Cold start package, engine heater (4-cylinder) NA
Cold start package, engine heater (6-cylinder)
Cold start package, transmission heater NA
Cold start package, PFC charge pump heater, NA
Cold start package preparation, NA
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.
Fuel heating device
For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.
For very low outside temperatures, the tractor can be equipped with a fuel preheating device.
NOTE: Only for Tier 2 engines
Part number |
Installation instructions |
Description |
Compatible models |
BL15427 |
--- |
Cold start package II, 110 V, 4-cylinder (Tier 2) |
6140M |
BL15426 |
MHM1656 |
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump) |
6110M – 6145M |
BL15430 |
MHM1656 |
Cold start package I, engine only |
6110M – 6145M |
BL15466 |
--- |
Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump) |
6140M – 6195M |
BL15548 |
MHM1655 |
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump) |
6110M – 6195M |
BL16128 |
MHM1821 |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16130
|
--- |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16188
|
--- |
Cold start package, engine heater (4-cylinder) |
6110M – 6145M (Except 6140M) |
BL16189 |
--- |
Cold start package, engine heater (6-cylinder) |
6140M – 6195M |
BL16190 |
--- |
Cold start package, transmission heater |
6110M - 6195M |
BL16193
|
--- |
Cold start package, PFC charge pump heater |
6110M - 6195M |
BL16194 |
--- |
Cold start package preparation, NA |
6110M - 6195M |
BL16204 |
MHM1821 |
Cold start package upgrade from one to two |
6110M - 6195M |
BL15539 |
MHM1654 |
Fuel heating device |
6110M - 6195M |
AL158520 |
--- |
Fuel preheater |
6155M – 6195M |
Cold start packages
The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.
Advantages: Better tempering in cold temperatures.
Cold start package I
- This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (not with code 8747)
Cold start package II
- This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (code 8747)
Cold start package I, engine only
Cold start package II, 110 V, 4-cylinder (Tier 2)
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)
Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)
Cold start package upgrade from one to two
NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.
Cold start package, engine heater (4-cylinder) NA
Cold start package, engine heater (6-cylinder)
Cold start package, transmission heater NA
Cold start package, PFC charge pump heater, NA
Cold start package preparation, NA
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.
Fuel heating device
For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.
For very low outside temperatures, the tractor can be equipped with a fuel preheating device.
NOTE: Only for Tier 2 engines
Part number |
Installation instructions |
Description |
Compatible models |
BL15427 |
--- |
Cold start package II, 110 V, 4-cylinder (Tier 2) |
6140M |
BL15426 |
MHM1656 |
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump) |
6110M – 6145M |
BL15430 |
MHM1656 |
Cold start package I, engine only |
6110M – 6145M |
BL15466 |
--- |
Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump) |
6140M – 6195M |
BL15548 |
MHM1655 |
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump) |
6110M – 6195M |
BL16128 |
MHM1821 |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16130
|
--- |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16188
|
--- |
Cold start package, engine heater (4-cylinder) |
6110M – 6145M (Except 6140M) |
BL16189 |
--- |
Cold start package, engine heater (6-cylinder) |
6140M – 6195M |
BL16190 |
--- |
Cold start package, transmission heater |
6110M - 6195M |
BL16193
|
--- |
Cold start package, PFC charge pump heater |
6110M - 6195M |
BL16194 |
--- |
Cold start package preparation, NA |
6110M - 6195M |
BL16204 |
MHM1821 |
Cold start package upgrade from one to two |
6110M - 6195M |
BL15539 |
MHM1654 |
Fuel heating device |
6110M - 6195M |
AL158520 |
--- |
Fuel preheater |
6155M – 6195M |
Cold start packages
The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.
Advantages: Better tempering in cold temperatures.
Cold start package I
- This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (not with code 8747)
Cold start package II
- This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (code 8747)
Cold start package I, engine only
Cold start package II, 110 V, 4-cylinder (Tier 2)
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)
Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)
Cold start package upgrade from one to two
NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.
Cold start package, engine heater (4-cylinder) NA
Cold start package, engine heater (6-cylinder)
Cold start package, transmission heater NA
Cold start package, PFC charge pump heater, NA
Cold start package preparation, NA
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.
Fuel heating device
For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.
For very low outside temperatures, the tractor can be equipped with a fuel preheating device.
NOTE: Only for Tier 2 engines
Part number |
Installation instructions |
Description |
Compatible models |
BL15427 |
--- |
Cold start package II, 110 V, 4-cylinder (Tier 2) |
6140M |
BL15426 |
MHM1656 |
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump) |
6110M – 6145M |
BL15430 |
MHM1656 |
Cold start package I, engine only |
6110M – 6145M |
BL15466 |
--- |
Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump) |
6140M – 6195M |
BL15548 |
MHM1655 |
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump) |
6110M – 6195M |
BL16128 |
MHM1821 |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16130
|
--- |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16188
|
--- |
Cold start package, engine heater (4-cylinder) |
6110M – 6145M (Except 6140M) |
BL16189 |
--- |
Cold start package, engine heater (6-cylinder) |
6140M – 6195M |
BL16190 |
--- |
Cold start package, transmission heater |
6110M - 6195M |
BL16193
|
--- |
Cold start package, PFC charge pump heater |
6110M - 6195M |
BL16194 |
--- |
Cold start package preparation, NA |
6110M - 6195M |
BL16204 |
MHM1821 |
Cold start package upgrade from one to two |
6110M - 6195M |
BL15539 |
MHM1654 |
Fuel heating device |
6110M - 6195M |
AL158520 |
--- |
Fuel preheater |
6155M – 6195M |
Cold start packages
The cold start packages pre-heat the engine, gearbox and charging pump at cold temperatures. Faster, smoother, and easier starting, saving time and money and reducing engine wear.
Advantages: Better tempering in cold temperatures.
Cold start package I
- This package includes an engine block heater and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (not with code 8747)
Cold start package II
- This package includes a heating kit (engine block heater, transmission oil pump heater and charging pump heater) and a power cable for a 230 V or 110 V socket.
- 174 Ah battery required (code 8747)
Cold start package I, engine only
Cold start package II, 110 V, 4-cylinder (Tier 2)
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump)
Cold start package II, 230 V, 6-cylinder (Engine, transmission, PFC charge pump)
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensated (PC) charge pump)
Cold start package upgrade from one to two
NOTE: If cold start package I (engine heater) is already installed.
This contains the transmission heater
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the PFC charge pump heater.
Cold start package, engine heater (4-cylinder) NA
Cold start package, engine heater (6-cylinder)
Cold start package, transmission heater NA
Cold start package, PFC charge pump heater, NA
Cold start package preparation, NA
Cold start package upgrade from one to two
Note: If cold start package I (engine heater) is already installed.
This contains the wiring harness for transmission and charge pump heater.
Fuel heating device
For very low outside temperatures, the tractor can be equipped with a fuel preheating device. Not compatible with Tier 2 engines.
For very low outside temperatures, the tractor can be equipped with a fuel preheating device.
NOTE: Only for Tier 2 engines
Part number |
Installation instructions |
Description |
Compatible models |
BL15427 |
--- |
Cold start package II, 110 V, 4-cylinder (Tier 2) |
6140M |
BL15426 |
MHM1656 |
Cold start package II, 230 V, 4-cylinder (Engine, transmission, pressure-and-flow compensated (PFC) charge pump) |
6110M – 6145M |
BL15430 |
MHM1656 |
Cold start package I, engine only |
6110M – 6145M |
BL15466 |
--- |
Cold start package II, 230V, 6-cylinder (Engine, transmission, PFC charge pump) |
6140M – 6195M |
BL15548 |
MHM1655 |
Cold start package II, 230V, 4-cylinder (Engine, transmission, pressure compensate (PC) charge pump) |
6110M – 6195M |
BL16128 |
MHM1821 |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16130
|
--- |
Cold start package upgrade from one to two |
6110M – 6195M |
BL16188
|
--- |
Cold start package, engine heater (4-cylinder) |
6110M – 6145M (Except 6140M) |
BL16189 |
--- |
Cold start package, engine heater (6-cylinder) |
6140M – 6195M |
BL16190 |
--- |
Cold start package, transmission heater |
6110M - 6195M |
BL16193
|
--- |
Cold start package, PFC charge pump heater |
6110M - 6195M |
BL16194 |
--- |
Cold start package preparation, NA |
6110M - 6195M |
BL16204 |
MHM1821 |
Cold start package upgrade from one to two |
6110M - 6195M |
BL15539 |
MHM1654 |
Fuel heating device |
6110M - 6195M |
AL158520 |
--- |
Fuel preheater |
6155M – 6195M |
Cold weather start aids
The optional cold-start packages are recommended for producers who frequently start tractors below -6 degrees Celsius (20 degrees Fahrenheit).
Electrical Equipment
Multi socket strip right door
The multi socket strip provides electrical power for any devices.
Three-terminal power outlet socket
The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.
Multiple socket strap with seven-pin signal socket
The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.
Part number |
Installation instructions |
Description |
Compatible models |
AL174215 |
MHM1130 |
Multi socket strip right door |
6110M -6195M |
AL203918 |
MHM868 |
Three-terminal power outlet socket |
6110M - 6195M |
AL203919 |
MHM868 |
Three-terminal socket for SAE |
6110M – 6195M |
BL15910 |
MHM1742 |
Multiple socket strap with seven -pin signal socket |
6110M – 6195M |
Multi socket strip right door
The multi socket strip provides electrical power for any devices.
Three-terminal power outlet socket
The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.
Multiple socket strap with seven-pin signal socket
The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.
Part number |
Installation instructions |
Description |
Compatible models |
AL174215 |
MHM1130 |
Multi socket strip right door |
6110M -6195M |
AL203918 |
MHM868 |
Three-terminal power outlet socket |
6110M - 6195M |
AL203919 |
MHM868 |
Three-terminal socket for SAE |
6110M – 6195M |
BL15910 |
MHM1742 |
Multiple socket strap with seven -pin signal socket |
6110M – 6195M |
Electrical power accessories
An electrical power strip provides six additional outlets for powering monitors or other electrical equipment.
Three different adapters may be ordered separately through Parts.
- The 3-ft electrical cord is used for hardwiring electrical components to be used with the power strip. The power strip end has a standard connector.
- The three-way convenience adapter allows three pin electrical connections to be adapted for use with the power strip.
- The cigar lighter outlet adapter can be used for plugging in items such as car charges for cell phones or MP3 players. It does not include a lighter.
Multi socket strip right door
The multi socket strip provides electrical power for any devices.
Three-terminal power outlet socket
The three-pin socket provides both 5- and 25-amp supplies from the first two pins. The third pin is connected to earth.
Multiple socket strap with seven-pin signal socket
The multiple socket strap with seven-pin signal socket is designed to connect the implement lighting to the tractor. It supplies in basic lighting, such as indicators and brake lights.
Part number |
Installation instructions |
Description |
Compatible models |
AL174215 |
MHM1130 |
Multi socket strip right door |
6110M -6195M |
AL203918 |
MHM868 |
Three-terminal power outlet socket |
6110M - 6195M |
AL203919 |
MHM868 |
Three-terminal socket for SAE |
6110M – 6195M |
BL15910 |
MHM1742 |
Multiple socket strap with seven -pin signal socket |
6110M – 6195M |
Front Axle
Front and rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up time.
Hub extension 60 mm (2.4 in.), front, tread adjustment
NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bolt circle diameter (BCD).
Hub extension 94 mm (3.7 in.), front, tread adjustment
Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Hub extension 219 mm (8.6 in.), front, tread Adjustment
Track extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Part number |
Installation instructions |
Description |
Compatible models |
AL156778 |
MHM804 |
Hub extension 60 mm (2.4 in.), front, tread adjustment |
6110M – 6195M |
BL15106 |
MHM1574 |
Hub Extension 94 mm (3.7 in.), front, tread adjustment |
6110M – 6195M |
BL15107 |
MHM1574 |
Hub extension 219 mm (8.6 in.), front, tread adjustment |
6110M – 6195M |
Front and rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up time.
Hub extension 60 mm (2.4 in.), front, tread adjustment
NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bolt circle diameter (BCD).
Hub extension 94 mm (3.7 in.), front, tread adjustment
Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Hub extension 219 mm (8.6 in.), front, tread Adjustment
Track extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Part number |
Installation instructions |
Description |
Compatible models |
AL156778 |
MHM804 |
Hub extension 60 mm (2.4 in.), front, tread adjustment |
6110M – 6195M |
BL15106 |
MHM1574 |
Hub Extension 94 mm (3.7 in.), front, tread adjustment |
6110M – 6195M |
BL15107 |
MHM1574 |
Hub extension 219 mm (8.6 in.), front, tread adjustment |
6110M – 6195M |
Front and rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up time.
Hub extension 60 mm (2.4 in.), front, tread adjustment
NOTE: Front wheel spacers, 60 mm (2.4 in.) each. Increased tread setting from 1926 mm - 2134 mm (75.8 in. - 84 in.). Only for front wheels with 275-mm (10.8-in.) bolt circle diameter (BCD).
Hub extension 94 mm (3.7 in.), front, tread adjustment
Track extension for front axle – two spacers, 94 mm (3.7 in.) each, track extended to 2000 mm (78.7 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750 mm - 3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Hub extension 219 mm (8.6 in.), front, tread Adjustment
Track extension for front axle - two spacers, 219 mm (8.62 in.) each, track extended to 2250 mm (89 in.).
Only for front wheels with 335-mm (13.2-in.) BCD.
If required, please order in addition:
- For total tractor width 2550 mm - 2750 mm (100.4 in. - 108.3 in.) = Extremity light kit
- For total tractor width 2750-3000 mm (108.3 in. - 118.1 in.) = Kit with extremity lights and warning sign.
Part number |
Installation instructions |
Description |
Compatible models |
AL156778 |
MHM804 |
Hub extension 60 mm (2.4 in.), front, tread adjustment |
6110M – 6195M |
BL15106 |
MHM1574 |
Hub Extension 94 mm (3.7 in.), front, tread adjustment |
6110M – 6195M |
BL15107 |
MHM1574 |
Hub extension 219 mm (8.6 in.), front, tread adjustment |
6110M – 6195M |
Front Fenders
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Two front fenders
The two front fenders cover the front tires to prevent mud, sand, stones, and other materials to spread over the front window, hood, and cab.
Part number |
Installation instructions |
Description |
Compatible models |
BL16219 |
--- |
Two front Fenders, 370-mm (14.6-in.) width (regular) |
6110M – 6195M |
BL16220
|
--- |
Two front fenders, 370-mm (14.6-in.) width (large) |
|
BL16221
|
--- |
Two front fenders, 420-mm (16.5-in.) width (regular) |
|
BL16222
|
--- |
Two front fenders, 420-mm (16.5-in.) width (large) |
|
BL16223
|
--- |
Two front fenders, 480-mm (18.9-in.) width (regular) |
|
BL16225 |
--- |
Two front fenders, 540-mm (21.3-in.) width (regular) |
|
BL16226
|
--- |
Two front fenders, 540-mm (21.3-in.) width (large) |
|
BL16227
|
--- |
Two front fenders, 620-mm (24.4-in.) width (large) |
|
BL16228
|
--- |
Two front fenders, 620-mm (24.4-in.) width (long) |
Base support kit for front fenders, rigid
The large, flexible fixed front fenders with full coverage can be adapted in a variety of ways to offer high flexibility in different track widths.
Part number |
Installation instructions |
Description |
Compatible models |
BL16231
|
--- |
Base support kit for front fenders, rigid |
6110M – 6195M |
Base support kit for turnable front fenders
Turnable front fenders allow a better steering angle and therefore a significant better maneuverability of the tractor.
Turnable front fenders –
- Protect from mud, stones, and debris
- Provide a better turning circle and improved steering angle
- Feature the same steering angle as tractors without front fenders
- Are made from rugged material
- Provide a better view through a clear front windshield
Part number |
Installation instructions |
Description |
Compatible models |
BL16232
|
--- |
Base support kit for turnable front fenders |
6110M – 6195M |
Front Hitch
Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.
Economy front hitch, Category 3N
Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.
- Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
- Continuous lift capacity: 3000 kg (7275.25 Ib)
- Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
- Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
- Category 3N
NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.
Part number |
Installation instructions |
Description |
Compatible models |
BL16750 |
MHM1896 MHM1827 |
Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity |
6110M – 6195M |
Oil Lines, FH
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
Two additional SCV coupler for front hitch
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Seven pin socket, Front hitch
To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.
Part number |
Installation instructions |
Description |
Compatible models |
BL16281 |
MHM1827 |
Oil lines, front hitch |
6110M – 6120M |
BL16282 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6120M |
BL16360 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16361 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16601 |
MHM1827 |
Seven pin socket, front Hitch |
6110M – 6210M |
BL16322 |
MHM1827 |
Two additional SCV coupler for front hitch |
6175M – 6210M |
BL16324 |
MHM1827 |
Two additional SCV coupler for front hitch |
6155M |
BL16326 |
MHM1827 |
Two additional SCV coupler for front hitch |
6140M – 6145M |
BL16328 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6140M |
BL16321 |
MHM1827 |
Oil lines, front hitch |
6175M – 6210M |
BL16323 |
MHM1827 |
Oil lines, front hitch |
6155M |
BL16325 |
MHM1827 |
Oil lines, front hitch |
6140M – 6145M |
BL16327 |
MHM1827 |
Oil lines, front hitch |
6110M – 6140M |
Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.
Economy front hitch, Category 3N
Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.
- Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
- Continuous lift capacity: 3000 kg (7275.25 Ib)
- Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
- Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
- Category 3N
NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.
Part number |
Installation instructions |
Description |
Compatible models |
BL16750 |
MHM1896 MHM1827 |
Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity |
6110M – 6195M |
Oil Lines, FH
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
Two additional SCV coupler for front hitch
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Seven pin socket, Front hitch
To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.
Part number |
Installation instructions |
Description |
Compatible models |
BL16281 |
MHM1827 |
Oil lines, front hitch |
6110M – 6120M |
BL16282 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6120M |
BL16360 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16361 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16601 |
MHM1827 |
Seven pin socket, front Hitch |
6110M – 6210M |
BL16322 |
MHM1827 |
Two additional SCV coupler for front hitch |
6175M – 6210M |
BL16324 |
MHM1827 |
Two additional SCV coupler for front hitch |
6155M |
BL16326 |
MHM1827 |
Two additional SCV coupler for front hitch |
6140M – 6145M |
BL16328 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6140M |
BL16321 |
MHM1827 |
Oil lines, front hitch |
6175M – 6210M |
BL16323 |
MHM1827 |
Oil lines, front hitch |
6155M |
BL16325 |
MHM1827 |
Oil lines, front hitch |
6140M – 6145M |
BL16327 |
MHM1827 |
Oil lines, front hitch |
6110M – 6140M |
Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.
Economy front hitch, Category 3N
Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.
- Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
- Continuous lift capacity: 3000 kg (7275.25 Ib)
- Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
- Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
- Category 3N
NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.
Part number |
Installation instructions |
Description |
Compatible models |
BL16750 |
MHM1896 MHM1827 |
Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity |
6110M – 6195M |
Oil Lines, FH
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
Two additional SCV coupler for front hitch
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Seven pin socket, Front hitch
To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.
Part number |
Installation instructions |
Description |
Compatible models |
BL16281 |
MHM1827 |
Oil lines, front hitch |
6110M – 6120M |
BL16282 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6120M |
BL16360 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16361 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16601 |
MHM1827 |
Seven pin socket, front Hitch |
6110M – 6210M |
BL16322 |
MHM1827 |
Two additional SCV coupler for front hitch |
6175M – 6210M |
BL16324 |
MHM1827 |
Two additional SCV coupler for front hitch |
6155M |
BL16326 |
MHM1827 |
Two additional SCV coupler for front hitch |
6140M – 6145M |
BL16328 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6140M |
BL16321 |
MHM1827 |
Oil lines, front hitch |
6175M – 6210M |
BL16323 |
MHM1827 |
Oil lines, front hitch |
6155M |
BL16325 |
MHM1827 |
Oil lines, front hitch |
6140M – 6145M |
BL16327 |
MHM1827 |
Oil lines, front hitch |
6110M – 6140M |
Front hitches enable front implements, such as mowers or packers, to be attached. For all 6M Tractors, a Category 3N front hitch is offered ex-factory or as an attachment. All John Deere front hitch are generally equipped with draft links with hook ends. Additional features such as front power take-off (PTO), power socket or front selective control valves (SCVs) must be ordered separately.
Economy front hitch, Category 3N
Front 3-point hitches enable to attach front implements i.e., mower conditioners or front presses.
- Maximum lift capacity on hooks: 4000 kg (8818.5 Ib)
- Continuous lift capacity: 3000 kg (7275.25 Ib)
- Maximum lift capacity 610 mm (24 in.) behind hooks: 3200 kg (7054.8 Ib)
- Continuous lift capacity 610 mm (24 in.) behind hooks: 2550 kg (5621.8 Ib)
- Category 3N
NOTE: This number does not contain the seven pin socket. If you need this feature, please order BL16601 separate.
Part number |
Installation instructions |
Description |
Compatible models |
BL16750 |
MHM1896 MHM1827 |
Economy front hitch, Category 3N, 4-ton (8818.5-lb) lift capacity |
6110M – 6195M |
Oil Lines, FH
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit economy front hitch. Please find additional information on the installation instructions MHM1827.
Two additional SCV coupler for front hitch
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
To retrofit second additional SCVs for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Pressure free return, Front hitch
To retrofit the pressure free return for economy front hitch. Please find additional information on the installation instructions MHM1827.
Seven pin socket, Front hitch
To retrofit seven pin socket for economy front hitch. This feature provides electrical power for e.g., implement lighting. Please find additional information on the installation instructions MHM1827.
Part number |
Installation instructions |
Description |
Compatible models |
BL16281 |
MHM1827 |
Oil lines, front hitch |
6110M – 6120M |
BL16282 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6120M |
BL16360 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16361 |
MHM1827 |
Pressure free return, front hitch |
6110M – 6120M |
BL16601 |
MHM1827 |
Seven pin socket, front Hitch |
6110M – 6210M |
BL16322 |
MHM1827 |
Two additional SCV coupler for front hitch |
6175M – 6210M |
BL16324 |
MHM1827 |
Two additional SCV coupler for front hitch |
6155M |
BL16326 |
MHM1827 |
Two additional SCV coupler for front hitch |
6140M – 6145M |
BL16328 |
MHM1827 |
Two additional SCV coupler for front hitch |
6110M – 6140M |
BL16321 |
MHM1827 |
Oil lines, front hitch |
6175M – 6210M |
BL16323 |
MHM1827 |
Oil lines, front hitch |
6155M |
BL16325 |
MHM1827 |
Oil lines, front hitch |
6140M – 6145M |
BL16327 |
MHM1827 |
Oil lines, front hitch |
6110M – 6140M |
Front Weights
Center link bracket for monoblock
If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.
Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.
This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.
Pickup weights monoblock
BL15020 – 1500 kg (3307 lb)
BL15083 – 900 kg (1984 lb)
BL15084 – 1150 kg (2535 lb)
AL204830 – 1800 kg (3968 lb)
Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.
The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).
For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.
Part number |
Installation instructions |
Description |
Compatible models |
BL15085 |
MHM1550 |
Center link bracket for monoblock |
6110M – 6195M |
BL15020 |
MHM1550 |
1500 kg (3307 lb) pickup weight |
6110M – 6195M |
BL15083 |
MHM1550 |
900 kg (1984 lb) pickup weight |
6110M – 6195M |
BL15084 |
MHM1550 |
1150 kg (2535 lb)) pickup weight |
6110M – 6195M |
AL204830 |
MHM1550 |
1800 kg (3968 lb) pickup weight |
6110M – 6195M |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)
The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.
Benefits:
- More traction with the right ballasting and easy installation of the weights.
Mounting parts for 6, 8, 10 Quik-Tatch™ weights
The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.
Mounting parts for 12, 14 Quik-Tatch weights
Mounting parts for 16, 18 Quik-Tatch weights
Front weight support, 60 kg (132.3 lb)
Front weight support, 110 kg (242.5 lb)
Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.
20 Front Quik-Tatch weights
Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right. Thus, 1000-kg (2204.6-lb) can be attached.
Weight, front suitcase 43-kg (95-lb) quantity of one
For front mount ballasting. High gloss green paint. North American applications.
Part number |
Installation instructions |
Description |
Compatible models |
AL119964 |
--- |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb) |
6110M – 6195M
|
AL119967 |
--- |
Mounting parts for 6, 8, 10 Quik-Tatch weights |
6110M – 6195M
|
AL119968 |
--- |
Mounting parts for 12, 14 Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
AL176563 |
--- |
Front weight support, 60 kg (132.3 lb) |
6110M – 6195M
|
AL176565 |
--- |
Front weight support, 110 kg (242.5 lb) |
6110M – 6195M
|
AL71258 |
--- |
20 Front Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
BL15020 |
MHM1550 |
Pick up weight 1500-kg (3307-lb) monoblock |
6110M – 6195M
|
BL15083 |
MHM1550 |
Pick up weight 900-kg (1984-lb) monoblock |
6110M – 6195M
|
BL15084 |
MHM1550 |
Pick up weight, 1150-kg (2535-lb) monoblock |
6110M – 6195M
|
AL204830 |
MHM1550 |
Pick up weight 1800-kg (3968-lb) monoblock |
6110M – 6195M
|
R127764 |
--- |
Weight, front suitcase 43-kg (95-lb) quantity of one |
6110M – 6195M |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)
The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.
Benefits:
- More traction with the right ballasting and easy installation of the weights.
Mounting parts for 6, 8, 10 Quik-Tatch™ weights
The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.
Mounting parts for 12, 14 Quik-Tatch weights
Mounting parts for 16, 18 Quik-Tatch weights
Front weight support, 60 kg (132.3 lb)
Front weight support, 110 kg (242.5 lb)
Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.
20 Front Quik-Tatch weights
Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right. Thus, 1000-kg (2204.6-lb) can be attached.
Weight, front suitcase 43-kg (95-lb) quantity of one
For front mount ballasting. High gloss green paint. North American applications.
Part number |
Installation instructions |
Description |
Compatible models |
AL119964 |
--- |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb) |
6110M – 6195M
|
AL119967 |
--- |
Mounting parts for 6, 8, 10 Quik-Tatch weights |
6110M – 6195M
|
AL119968 |
--- |
Mounting parts for 12, 14 Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
AL176563 |
--- |
Front weight support, 60 kg (132.3 lb) |
6110M – 6195M
|
AL176565 |
--- |
Front weight support, 110 kg (242.5 lb) |
6110M – 6195M
|
AL71258 |
--- |
20 Front Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
BL15020 |
MHM1550 |
Pick up weight 1500-kg (3307-lb) monoblock |
6110M – 6195M
|
BL15083 |
MHM1550 |
Pick up weight 900-kg (1984-lb) monoblock |
6110M – 6195M
|
BL15084 |
MHM1550 |
Pick up weight, 1150-kg (2535-lb) monoblock |
6110M – 6195M
|
AL204830 |
MHM1550 |
Pick up weight 1800-kg (3968-lb) monoblock |
6110M – 6195M
|
R127764 |
--- |
Weight, front suitcase 43-kg (95-lb) quantity of one |
6110M – 6195M |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb)
The front weight stop kit includes two special coupling weights, weighing 50-kg (110.2-lb) each. The total kit weights 100 kg (220.4 lb). Those weights are required to fix a front weight package.
Benefits:
- More traction with the right ballasting and easy installation of the weights.
Mounting parts for 6, 8, 10 Quik-Tatch™ weights
The mounting parts, consisting of a bolt with a split pin and two screws with fixings, are used to mount the Quik-Tatch suitcase weights.
Mounting parts for 12, 14 Quik-Tatch weights
Mounting parts for 16, 18 Quik-Tatch weights
Front weight support, 60 kg (132.3 lb)
Front weight support, 110 kg (242.5 lb)
Front weight support allows the attachment of front Quik-Tatch suitcase weights and can easily be mounted in the existing preparations on the front of the tractor. The 60 kg (132.3 lb) base weight is wider so that up to 14 Quik-Tatch weights can be mounted. With the 110 kg (242.5 lb) base weight up to 18 Quik-Tatch weights can be mounted. Both weights support is not compatible with front PTO.
20 Front Quik-Tatch weights
Cast Quik-Tatch suitcase weights can be added to the front weight support to optimize ballasting. This option includes 10 X 50 kg (10 X 110.2-lb) left and 10 X 50 kg (10 X 110.2-lb) right. Thus, 1000-kg (2204.6-lb) can be attached.
Weight, front suitcase 43-kg (95-lb) quantity of one
For front mount ballasting. High gloss green paint. North American applications.
Part number |
Installation instructions |
Description |
Compatible models |
AL119964 |
--- |
Front weight, stop kit, 2 x 50 kg (2 x 110.2 lb) |
6110M – 6195M
|
AL119967 |
--- |
Mounting parts for 6, 8, 10 Quik-Tatch weights |
6110M – 6195M
|
AL119968 |
--- |
Mounting parts for 12, 14 Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
AL176563 |
--- |
Front weight support, 60 kg (132.3 lb) |
6110M – 6195M
|
AL176565 |
--- |
Front weight support, 110 kg (242.5 lb) |
6110M – 6195M
|
AL71258 |
--- |
20 Front Quik-Tatch weights |
6110M – 6195M
|
AL82932 |
--- |
Mounting parts for 16, 18 Quik-Tatch weights |
6110M – 6195M
|
BL15020 |
MHM1550 |
Pick up weight 1500-kg (3307-lb) monoblock |
6110M – 6195M
|
BL15083 |
MHM1550 |
Pick up weight 900-kg (1984-lb) monoblock |
6110M – 6195M
|
BL15084 |
MHM1550 |
Pick up weight, 1150-kg (2535-lb) monoblock |
6110M – 6195M
|
AL204830 |
MHM1550 |
Pick up weight 1800-kg (3968-lb) monoblock |
6110M – 6195M
|
R127764 |
--- |
Weight, front suitcase 43-kg (95-lb) quantity of one |
6110M – 6195M |
Center link bracket for monoblock
If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.
Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.
This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.
Pickup weights monoblock
BL15020 – 1500 kg (3307 lb)
BL15083 – 900 kg (1984 lb)
BL15084 – 1150 kg (2535 lb)
AL204830 – 1800 kg (3968 lb)
Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.
The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).
For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.
Part number |
Installation instructions |
Description |
Compatible models |
BL15085 |
MHM1550 |
Center link bracket for monoblock |
6110M – 6195M |
BL15020 |
MHM1550 |
1500 kg (3307 lb) pickup weight |
6110M – 6195M |
BL15083 |
MHM1550 |
900 kg (1984 lb) pickup weight |
6110M – 6195M |
BL15084 |
MHM1550 |
1150 kg (2535 lb)) pickup weight |
6110M – 6195M |
AL204830 |
MHM1550 |
1800 kg (3968 lb) pickup weight |
6110M – 6195M |
Center link bracket for monoblock
If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.
Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.
This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.
Pickup weights monoblock
BL15020 – 1500 kg (3307 lb)
BL15083 – 900 kg (1984 lb)
BL15084 – 1150 kg (2535 lb)
AL204830 – 1800 kg (3968 lb)
Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.
The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).
For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.
Part number |
Installation instructions |
Description |
Compatible models |
BL15085 |
MHM1550 |
Center link bracket for monoblock |
6110M – 6195M |
BL15020 |
MHM1550 |
1500 kg (3307 lb) pickup weight |
6110M – 6195M |
BL15083 |
MHM1550 |
900 kg (1984 lb) pickup weight |
6110M – 6195M |
BL15084 |
MHM1550 |
1150 kg (2535 lb)) pickup weight |
6110M – 6195M |
AL204830 |
MHM1550 |
1800 kg (3968 lb) pickup weight |
6110M – 6195M |
Center link bracket for monoblock
If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.
Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.
This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.
Pickup weights monoblock
BL15020 – 1500 kg (3307 lb)
BL15083 – 900 kg (1984 lb)
BL15084 – 1150 kg (2535 lb)
AL204830 – 1800 kg (3968 lb)
Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.
The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).
For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.
Part number |
Installation instructions |
Description |
Compatible models |
BL15085 |
MHM1550 |
Center link bracket for monoblock |
6110M – 6195M |
BL15020 |
MHM1550 |
1500 kg (3307 lb) pickup weight |
6110M – 6195M |
BL15083 |
MHM1550 |
900 kg (1984 lb) pickup weight |
6110M – 6195M |
BL15084 |
MHM1550 |
1150 kg (2535 lb)) pickup weight |
6110M – 6195M |
AL204830 |
MHM1550 |
1800 kg (3968 lb) pickup weight |
6110M – 6195M |
Center link bracket for monoblock
If a monoblock weight is to be converted into a pickup weight, lower link guide balls and a bracket for connecting the center link can be retrofitted with this attachment.
Compatible with pickup weights 900-kg (1984-lb)/1150-kg (2535-lb), with distance tubes.
This center link bracket is only compatible with pickup weights featuring the monoblock design. Pickup weights with the former design require center link holder.
Pickup weights monoblock
BL15020 – 1500 kg (3307 lb)
BL15083 – 900 kg (1984 lb)
BL15084 – 1150 kg (2535 lb)
AL204830 – 1800 kg (3968 lb)
Pickup weights compensate weight differences between the rear and front axle and can easily be lifted with front or rear hitch without requiring any manual lifting by the operator. The weights with 900 kg (1984 lb) and 1150 kg (2535 lb) are self-levelling.
The pickup weights with 900 kg (1984 lb) and 1150 kg (2535 lb) can either be attached to the base weight or to the front hitch. The pickup weights of 1500 kg (3307 lb) and 1800 kg (3968 lb) can only be attached to the front or rear hitch. The pickup weight with 1150 kg (2535 lb) has a greater depth than the pick-up weight with 900 kg (1984 lb).
For front loader work, pickup weights can be attached to the rear hitch as rear ballast to transfer more traction to the rear axle.
Part number |
Installation instructions |
Description |
Compatible models |
BL15085 |
MHM1550 |
Center link bracket for monoblock |
6110M – 6195M |
BL15020 |
MHM1550 |
1500 kg (3307 lb) pickup weight |
6110M – 6195M |
BL15083 |
MHM1550 |
900 kg (1984 lb) pickup weight |
6110M – 6195M |
BL15084 |
MHM1550 |
1150 kg (2535 lb)) pickup weight |
6110M – 6195M |
AL204830 |
MHM1550 |
1800 kg (3968 lb) pickup weight |
6110M – 6195M |
One suitcase weight of 43 kg (95 lb).
GreenStar™ and AutoTrac™
AutoTrac automated steering reduces overlap and saves time, fuel, and labor costs, whether you are cultivating, ploughing, seeding, or fertilizing. Overlap is reduced by 90 percent.
Benefits:
- Saving costs of operation
- Higher operator comfort
- Overall improved efficiency
GreenStar Ready
The GreenStar Ready wiring harness is required to enable ISOBUS on the tractor.
AutoTrac Ready
The AutoTrac system reduces overlaps, saves time, fuel, and labor costs. Whether operator is cultivating or ploughing, planting, or sowing, spraying, or fertilizing, the overlap is reduced by up to 90 percent. The turning manoeuvre at the headland is also possible more quickly, as the AutoTrac system will automatically turn into the next lane.
Wheel angle sensor
This wheel angle sensor allows the system to know the exact location of the steering wheels or articulation point. Wheel angle sensors are important for achieving the highest level of accuracy.
NOTE: Needs to be ordered in addition when AutoTrac Ready is retrofitted.
Part number |
Installation instructions |
Description |
Compatible models |
BL16210 |
MHM1830 |
GreenStar Ready |
6110M - 6120M |
BL16433 |
MHM1865 |
GreenStar Ready |
6110M – 6140M |
BL16434 |
MHM1865 |
GreenStar Ready |
6140M – 6145M |
BL16435 |
MHM1865 |
GreenStar Ready |
6155M |
BL16436 |
MHM1865 |
GreenStar Ready |
6175M – 6195M |
BL16211 |
MHM1831 |
AutoTrac Ready |
6110M – 6120M |
BL16425 |
MHM1864 |
AutoTrac Ready |
6130M – 6140M |
BL16426 |
MHM1864 |
AutoTrac Ready |
6110M – 6125M |
BL16427 |
MHM1864 |
AutoTrac Ready |
6145M |
BL16428 |
MHM1864 |
AutoTrac Ready |
6140M |
BL16429 |
MHM1864 |
AutoTrac Ready |
6155M |
BL16430 |
MHM1864 |
AutoTrac Ready |
6155M (Tier2) |
BL16431 |
MHM1864 |
AutoTrac Ready |
6175M – 6195M |
BL16432 |
MHM1864 |
AutoTrac Ready |
|
BL16779 |
MHM1946 |
Wheel angle sensor |
6110M, 6120M, 6130M, 6145M – 6195M |
AutoTrac automated steering reduces overlap and saves time, fuel, and labor costs, whether you are cultivating, ploughing, seeding, or fertilizing. Overlap is reduced by 90 percent.
Benefits:
- Saving costs of operation
- Higher operator comfort
- Overall improved efficiency
GreenStar Ready
The GreenStar Ready wiring harness is required to enable ISOBUS on the tractor.
AutoTrac Ready
The AutoTrac system reduces overlaps, saves time, fuel, and labor costs. Whether operator is cultivating or ploughing, planting, or sowing, spraying, or fertilizing, the overlap is reduced by up to 90 percent. The turning manoeuvre at the headland is also possible more quickly, as the AutoTrac system will automatically turn into the next lane.
Wheel angle sensor
This wheel angle sensor allows the system to know the exact location of the steering wheels or articulation point. Wheel angle sensors are important for achieving the highest level of accuracy.
NOTE: Needs to be ordered in addition when AutoTrac Ready is retrofitted.
Part number |
Installation instructions |
Description |
Compatible models |
BL16210 |
MHM1830 |
GreenStar Ready |
6110M - 6120M |
BL16433 |
MHM1865 |
GreenStar Ready |
6110M – 6140M |
BL16434 |
MHM1865 |
GreenStar Ready |
6140M – 6145M |
BL16435 |
MHM1865 |
GreenStar Ready |
6155M |
BL16436 |
MHM1865 |
GreenStar Ready |
6175M – 6195M |
BL16211 |
MHM1831 |
AutoTrac Ready |
6110M – 6120M |
BL16425 |
MHM1864 |
AutoTrac Ready |
6130M – 6140M |
BL16426 |
MHM1864 |
AutoTrac Ready |
6110M – 6125M |
BL16427 |
MHM1864 |
AutoTrac Ready |
6145M |
BL16428 |
MHM1864 |
AutoTrac Ready |
6140M |
BL16429 |
MHM1864 |
AutoTrac Ready |
6155M |
BL16430 |
MHM1864 |
AutoTrac Ready |
6155M (Tier2) |
BL16431 |
MHM1864 |
AutoTrac Ready |
6175M – 6195M |
BL16432 |
MHM1864 |
AutoTrac Ready |
|
BL16779 |
MHM1946 |
Wheel angle sensor |
6110M, 6120M, 6130M, 6145M – 6195M |
AutoTrac automated steering reduces overlap and saves time, fuel, and labor costs, whether you are cultivating, ploughing, seeding, or fertilizing. Overlap is reduced by 90 percent.
Benefits:
- Saving costs of operation
- Higher operator comfort
- Overall improved efficiency
GreenStar Ready
The GreenStar Ready wiring harness is required to enable ISOBUS on the tractor.
AutoTrac Ready
The AutoTrac system reduces overlaps, saves time, fuel, and labor costs. Whether operator is cultivating or ploughing, planting, or sowing, spraying, or fertilizing, the overlap is reduced by up to 90 percent. The turning manoeuvre at the headland is also possible more quickly, as the AutoTrac system will automatically turn into the next lane.
Wheel angle sensor
This wheel angle sensor allows the system to know the exact location of the steering wheels or articulation point. Wheel angle sensors are important for achieving the highest level of accuracy.
NOTE: Needs to be ordered in addition when AutoTrac Ready is retrofitted.
Part number |
Installation instructions |
Description |
Compatible models |
BL16210 |
MHM1830 |
GreenStar Ready |
6110M - 6120M |
BL16433 |
MHM1865 |
GreenStar Ready |
6110M – 6140M |
BL16434 |
MHM1865 |
GreenStar Ready |
6140M – 6145M |
BL16435 |
MHM1865 |
GreenStar Ready |
6155M |
BL16436 |
MHM1865 |
GreenStar Ready |
6175M – 6195M |
BL16211 |
MHM1831 |
AutoTrac Ready |
6110M – 6120M |
BL16425 |
MHM1864 |
AutoTrac Ready |
6130M – 6140M |
BL16426 |
MHM1864 |
AutoTrac Ready |
6110M – 6125M |
BL16427 |
MHM1864 |
AutoTrac Ready |
6145M |
BL16428 |
MHM1864 |
AutoTrac Ready |
6140M |
BL16429 |
MHM1864 |
AutoTrac Ready |
6155M |
BL16430 |
MHM1864 |
AutoTrac Ready |
6155M (Tier2) |
BL16431 |
MHM1864 |
AutoTrac Ready |
6175M – 6195M |
BL16432 |
MHM1864 |
AutoTrac Ready |
|
BL16779 |
MHM1946 |
Wheel angle sensor |
6110M, 6120M, 6130M, 6145M – 6195M |
AutoTrac automated steering reduces overlap and saves time, fuel, and labor costs, whether you are cultivating, ploughing, seeding, or fertilizing. Overlap is reduced by 90 percent.
Benefits:
- Saving costs of operation
- Higher operator comfort
- Overall improved efficiency
GreenStar Ready
The GreenStar Ready wiring harness is required to enable ISOBUS on the tractor.
AutoTrac Ready
The AutoTrac system reduces overlaps, saves time, fuel, and labor costs. Whether operator is cultivating or ploughing, planting, or sowing, spraying, or fertilizing, the overlap is reduced by up to 90 percent. The turning manoeuvre at the headland is also possible more quickly, as the AutoTrac system will automatically turn into the next lane.
Wheel angle sensor
This wheel angle sensor allows the system to know the exact location of the steering wheels or articulation point. Wheel angle sensors are important for achieving the highest level of accuracy.
NOTE: Needs to be ordered in addition when AutoTrac Ready is retrofitted.
Part number |
Installation instructions |
Description |
Compatible models |
BL16210 |
MHM1830 |
GreenStar Ready |
6110M - 6120M |
BL16433 |
MHM1865 |
GreenStar Ready |
6110M – 6140M |
BL16434 |
MHM1865 |
GreenStar Ready |
6140M – 6145M |
BL16435 |
MHM1865 |
GreenStar Ready |
6155M |
BL16436 |
MHM1865 |
GreenStar Ready |
6175M – 6195M |
BL16211 |
MHM1831 |
AutoTrac Ready |
6110M – 6120M |
BL16425 |
MHM1864 |
AutoTrac Ready |
6130M – 6140M |
BL16426 |
MHM1864 |
AutoTrac Ready |
6110M – 6125M |
BL16427 |
MHM1864 |
AutoTrac Ready |
6145M |
BL16428 |
MHM1864 |
AutoTrac Ready |
6140M |
BL16429 |
MHM1864 |
AutoTrac Ready |
6155M |
BL16430 |
MHM1864 |
AutoTrac Ready |
6155M (Tier2) |
BL16431 |
MHM1864 |
AutoTrac Ready |
6175M – 6195M |
BL16432 |
MHM1864 |
AutoTrac Ready |
|
BL16779 |
MHM1946 |
Wheel angle sensor |
6110M, 6120M, 6130M, 6145M – 6195M |
Lighting
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Extremity lights preparation kit
The extremity lights provide enhanced visibility during transport and comply with the American Society of Agricultural Engineers (ASAE) standard for lighting and marking.
Each lighting arm has a working position, a storage position, and a breakaway feature. These features allow the operator to position the lights to the most desirable location for maximum effectiveness. The design minimizes reflection in the cab.
NOTE: See the parts catalog and installation instructions for additional required components.
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Multiple lighting upgrades are available to improve the operator’s visibility during long workdays and in dark conditions.
John Deere light-emitting diode (LED) lights provide maximum 2500 Lumen of visible light to ensure best possible working conditions and safety.
Beacon light, left-hand/right-hand side (Halogen or LED)
Beacon lights improve traffic safety, especially in dark conditions. With these operators make the traffic aware of tractor and implement size. This light can be mounted on the mirror bracket on the A-post of the tractor and can be switched on from inside the cab.
Headlight on beltline, 2 x H4, pedestal
This headlight can be mounted on the beltline of the cab. It provides excellent visibility in dark conditions.
NOTE: Head light drive side required (ARHT)
Two worklights on beltline, HB3 or LED, pedestal
These two worklights can be mounted on the beltline of the cab. The halogen-type HB3 or LED bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner
These adjustable worklights can be mounted on the front or rear cab roof on both left and right side. The halogen-type HB3 bulbs provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, front outer
These LED adjustable worklights can be mounted on the front outer of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, front corner (Region 2)
These HB3 or LED adjustable worklights can be mounted on the front corner of the roof cab. They provide excellent visibility in dark conditions.
Fixed worklights, roof mounted, HB3 or LED, rear side
These HB3 or LED adjustable worklights can be mounted on the rear side of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, HB3 or LED, rear inner
These HB3 or LED adjustable worklights can be mounted on the rear inner of the roof cab. They provide excellent visibility in dark conditions.
Adjustable worklights, roof mounted, LED, rear corner (Region 2)
To achieve better visibility in dark conditions, LED lights can be mounted on the roof of the tractor.
Two worklights on rear fender, HB3 or LED, pedestal (North America)
To achieve better visibility in dark conditions, two HB3 or LED lights can be installed on the rear fender of the tractor. These improve the view of the rear implement.
One worklight HB3, on beacon light bracket
The HB3 worklight can be mounted on the beacon light bracket. It provides better visibility in dark conditions.
Extremity light and warning sign
When field installing track extensions on a tractor, extremity lights (and warning signs) are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
NOTE: The extremity lights are available with and without warning signs.
Extremity light Preparation (North America)
A preparation set for extremity lights for extra wide vehicles. Extremity lights and warning signs are required when the overall tractor width is between 2750 mm - 3000 mm (108.3 in. - 118.1 in.).
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
Beltline bracket, for headlights and worklights
This kit includes two beltline brackets to install headlights and additional worklights on the tractor.
NOTE: Compatible with tractors without cab suspension
Part number |
Installation instructions |
Description |
Compatible models |
BL16135
|
MHM1786 |
Beacon light, left-hand side (Halogen or LED) |
6110M – 6195M |
BL16136 |
MHM1786 |
Beacon light, right side (Halogen or LED) |
6110M – 6195M |
BL16133 |
MHM1785 |
Headlight on beltline, 2 x H4, pedestal |
6110M – 6195M |
BL16134 |
MHM1785 |
Two worklights on beltline, HB3 or LED, pedestal |
6110M – 6195M |
BL16137 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, front or rear inner |
6110M – 6195M |
BL16138 |
MHM1787 |
Adjustable worklights, roof mounted, LED, front outer |
6110M – 6195M |
BL16139 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, front corner, Region 2 |
6110M – 6195M |
BL16140 |
MHM1787 |
Fixed worklights, roof mounted, HB3 or LED, rear side |
6110M – 6195M |
BL16141 |
MHM1787 |
Adjustable worklights, roof mounted, HB3 or LED, rear inner |
6110M – 6195M |
BL16142 |
MHM1787 |
Adjustable worklights, roof mounted, LED, rear corner, Region 2 |
6110M – 6195M |
BL16144 |
MHM1789 |
Two worklights on rear fender, HB3 or LED, pedestal (North America) |
6110M – 6195M |
AL205916 |
MHM1515 |
One worklight HB3, on beacon light bracket |
6110M – 6195M |
AL164386 |
MHM906 |
Extremity light and warning sign |
6110M – 6195M |
AL169786 |
MHM906 |
Extremity light without warning signs |
6110M – 6195M |
AL201586 |
MHM873 |
Extremity light preparation |
6110M – 6195M
|
BL16661 |
MHM1719 |
Beltline bracket, for headlights and worklights |
6110M – 6195M |
BL16657 |
MHM1917 |
Beltline bracket, for headlights and worklights |
6110M – 6120M |
Mid Selective Control Valves
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
To make front loader applications possible or more productive, different front loader preparation kits and additional upgrades are available.
BL16083
The mechanical independent control valve (M-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
Order oil lines and lever according to tractor specification in addition.
BL16084
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
Order oil lines and lever according to tractor specification in addition.
BL16085
The electrical independent control valve (E-ICV) is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
Order oil lines and lever according to tractor specification in addition.
BL16086
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16182
This attachment contains an M-ICV, which enables an upgrade from two to three M-ICV. With a third valve the operator can control e.g., a bale fork.
BL16087
NOTE: For tractors up to SN9771392.
This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification in addition.
BL16103
These parts are required to retrofit E-ICV on the tractor.
BL16196
Joystick with gear shifting function.
Please order software AL233342 in addition.
BL16201
Joystick without gear shifting function.
Please order software AL233343 in addition.
BL16205
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs.
BL16206
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16207
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. E-ICV can be controlled by an electrical joystick.
BL16208
The E-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the E-ICV. With a third function the operator can control e.g., a bale fork.
BL16552
These parts are required to retrofit E-ICV on the tractor.
They are required to retrofit midstack SCVs.
BL16300
BL16301
BL16302
BL16303
BL16304
BL16305
BL16306
BL16307
BL16308
BL16309
BL16310
BL16311
BL16312
BL16313
BL16314
BL16315
BL16316
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16317
The M-ICV is located below the tractor cab and enables additional control for front loader work while the rear SCVs are used for other applications. The mechanical joystick (BL16333) is required to operate the M-ICVs. With a third function the operator can control e.g., a bale fork.
BL16772
Feature: This attachment contains an E-ICV, which enables an upgrade from two to three E-ICV. With a third valve the operator can control e.g., a bale fork.
Order software kit AL220192, oil lines and lever according to tractor specification.
Part number |
Installation instructions |
Description |
Compatible models |
BL16083 |
MHM1768 |
Mechanical midstack valve, two function |
6110M – 6120M |
BL16084 |
MHM1768 |
Mechanical midstack valve, three function |
6110M – 6120M |
BL16085 |
MHM1769 |
Electrical midstack valve, two function |
6110M – 6120M |
BL16086 |
MHM1769 |
Electrical midstack valve, three function |
6110M – 6120M |
BL16087 |
MHM1770 |
E-ICV upgrade kit from two to three valves |
6110M – 6195M |
BL16103 |
MHM1769 |
Electrical parts, wiring harness for electrical midstack retrofit |
6110M – 6120M |
BL16182 |
MHM1770 |
M-ICV Upgrade kit from two to three valves |
6110M – 6195M |
BL16196 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / GSS / R |
6110M – 6195M |
BL16201 |
MHM1768 |
Joystick, M-ICV, three function and D / LSS / R |
6110M – 6195M |
BL16235 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16236 |
MHM1834 |
E-ICV Joystick |
6110M – 6195M |
BL16206 |
MHM1822 |
Mechanical midstack valve, three function |
6130M – 6195M |
BL16205 |
MHM1822 |
Mechanical midstack valve, two Function |
6130M – 6195M |
BL16207 |
MHM1823 |
Electrical midstack valve, two function |
6130M – 6195M |
BL16208 |
MHM1823 |
Electrical midstack valve, three function |
6130M – 6195M |
BL16552 |
MHM1823 |
Electrical parts, wiring harness for electrical midstack retrofit |
6130M – 6195M |
BL16300 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6110M – 6140M |
BL16301 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6110M – 6140M |
BL16302 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6110M – 6140M |
BL16303 |
MHM1822 |
Oil lines, ICV, PC, Position 3, Tier 4 |
6140M – 6145M |
BL16304 |
MHM1822 |
Oil lines, ICV, PC, Position 4, Tier 4 |
6140M – 6145M |
BL16305 |
MHM1822 |
Oil lines, ICV, PFC, Tier 4 |
6140M – 6145M |
BL16306 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6155M |
BL16307 |
MHM1822 |
Oil lines, ICV, Tier 4 |
6175M – 6195M |
BL16308 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6110M – 6140M |
BL16309 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6110M – 6140M |
BL16310 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6110M – 6140M |
BL16311 |
MHM1852 |
Oil lines, ICV, PFC, Tier 2 |
6140M – 6145M |
BL16312 |
MHM1852 |
Oil lines, ICV, PC, Position 3, Tier 2 |
6140M – 6145M |
BL16313 |
MHM1852 |
Oil lines, ICV, PC, Position 4, Tier 2 |
6140M – 6145M |
BL16314 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6155M |
BL16315 |
MHM1852 |
Oil lines, ICV, Tier 2 |
6175M – 6195M |
BL16316 |
MHM1852 |
Mechanical midstack valve, two function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16317 |
MHM1852 |
Mechanical midstack valve, three function |
6110M – 6140M (Tier 2 Cab Tractor) 6155M – 6195M |
BL16772 |
MHM1770 |
E-ICV upgrade from two to three |
6110M – 6195M |
Miscellaneous
45-L (12-gal.) storage container
With a capacity of 45-L (12-gal.) and a 45-kg (99-lb) maximum payload, this sheet metal storage container offers additional space for items like rubber boots, oil cans, bulky tools, grease guns and more. It is equipped with two handles on the side to make it easy to carry. With the help of the included quick-lock pin the container can be closed rapidly. Only for front installation.
Lockable filler cap DEF tank
Locking the DEF tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable filler cap fuel tank
Locking the diesel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable fuel tank
Locking the fuel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Security door lock kit
The security door lock kit features an individual key system that prevents misuse of the standard ignition key. This field kit provides individual security by individual keys for all equipment kept inside the cab. The kit comes with four keys, in case of damage or loss a blank key can be ordered. The security door lock kit protects from vandalism and theft.
Toolbox, with or without front loader
The toolbox can be used to organize, carry, and protect tools. There are two available versions: the toolbox with front loader and the one without it.
Lockable hood latch
Locking the hood with an individual key, different from the standard ignition key, provides individual security against vandalism and theft.
Part number |
Installation instructions |
Description |
Compatible models |
AL120005 |
---
|
45-L (12-gal.) storage container |
6110M – 6195M |
AL211572 |
--- |
Lockable filler cap DEF tank |
6110M – 6120M |
AL223266 |
--- |
Lockable fuel tank |
6110M – 6120M |
AL213203 |
--- |
Lockable filler cap fuel tank |
6110M – 6196M |
AL71345 |
--- |
Security door lock kit |
6110M – 6195M |
BL16319 |
MHM1853 |
Toolbox with front loader |
6110M – 6120M |
BL16468 |
MHM1853 |
Toolbox without front loader |
6110M – 6120M |
BL16761 |
MHM1886 |
Lockable hood latch |
6110M – 6120M |
AL204829 |
MHM1519 |
Toolbox |
6110M – 6195M |
BL16363 |
MHM1886 |
Lockable hood latch |
6110M – 6140M |
BL16365 |
MHM1886 |
Lockable hood latch |
6140M – 6195M |
45-L (12-gal.) storage container
With a capacity of 45-L (12-gal.) and a 45-kg (99-lb) maximum payload, this sheet metal storage container offers additional space for items like rubber boots, oil cans, bulky tools, grease guns and more. It is equipped with two handles on the side to make it easy to carry. With the help of the included quick-lock pin the container can be closed rapidly. Only for front installation.
Lockable filler cap DEF tank
Locking the DEF tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable filler cap fuel tank
Locking the diesel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable fuel tank
Locking the fuel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Security door lock kit
The security door lock kit features an individual key system that prevents misuse of the standard ignition key. This field kit provides individual security by individual keys for all equipment kept inside the cab. The kit comes with four keys, in case of damage or loss a blank key can be ordered. The security door lock kit protects from vandalism and theft.
Toolbox, with or without front loader
The toolbox can be used to organize, carry, and protect tools. There are two available versions: the toolbox with front loader and the one without it.
Lockable hood latch
Locking the hood with an individual key, different from the standard ignition key, provides individual security against vandalism and theft.
Part number |
Installation instructions |
Description |
Compatible models |
AL120005 |
---
|
45-L (12-gal.) storage container |
6110M – 6195M |
AL211572 |
--- |
Lockable filler cap DEF tank |
6110M – 6120M |
AL223266 |
--- |
Lockable fuel tank |
6110M – 6120M |
AL213203 |
--- |
Lockable filler cap fuel tank |
6110M – 6196M |
AL71345 |
--- |
Security door lock kit |
6110M – 6195M |
BL16319 |
MHM1853 |
Toolbox with front loader |
6110M – 6120M |
BL16468 |
MHM1853 |
Toolbox without front loader |
6110M – 6120M |
BL16761 |
MHM1886 |
Lockable hood latch |
6110M – 6120M |
AL204829 |
MHM1519 |
Toolbox |
6110M – 6195M |
BL16363 |
MHM1886 |
Lockable hood latch |
6110M – 6140M |
BL16365 |
MHM1886 |
Lockable hood latch |
6140M – 6195M |
45-L (12-gal.) storage container
With a capacity of 45-L (12-gal.) and a 45-kg (99-lb) maximum payload, this sheet metal storage container offers additional space for items like rubber boots, oil cans, bulky tools, grease guns and more. It is equipped with two handles on the side to make it easy to carry. With the help of the included quick-lock pin the container can be closed rapidly. Only for front installation.
Lockable filler cap DEF tank
Locking the DEF tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable filler cap fuel tank
Locking the diesel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable fuel tank
Locking the fuel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Security door lock kit
The security door lock kit features an individual key system that prevents misuse of the standard ignition key. This field kit provides individual security by individual keys for all equipment kept inside the cab. The kit comes with four keys, in case of damage or loss a blank key can be ordered. The security door lock kit protects from vandalism and theft.
Toolbox, with or without front loader
The toolbox can be used to organize, carry, and protect tools. There are two available versions: the toolbox with front loader and the one without it.
Lockable hood latch
Locking the hood with an individual key, different from the standard ignition key, provides individual security against vandalism and theft.
Part number |
Installation instructions |
Description |
Compatible models |
AL120005 |
---
|
45-L (12-gal.) storage container |
6110M – 6195M |
AL211572 |
--- |
Lockable filler cap DEF tank |
6110M – 6120M |
AL223266 |
--- |
Lockable fuel tank |
6110M – 6120M |
AL213203 |
--- |
Lockable filler cap fuel tank |
6110M – 6196M |
AL71345 |
--- |
Security door lock kit |
6110M – 6195M |
BL16319 |
MHM1853 |
Toolbox with front loader |
6110M – 6120M |
BL16468 |
MHM1853 |
Toolbox without front loader |
6110M – 6120M |
BL16761 |
MHM1886 |
Lockable hood latch |
6110M – 6120M |
AL204829 |
MHM1519 |
Toolbox |
6110M – 6195M |
BL16363 |
MHM1886 |
Lockable hood latch |
6110M – 6140M |
BL16365 |
MHM1886 |
Lockable hood latch |
6140M – 6195M |
Custom key door locks
Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.
45-L (12-gal.) storage container
With a capacity of 45-L (12-gal.) and a 45-kg (99-lb) maximum payload, this sheet metal storage container offers additional space for items like rubber boots, oil cans, bulky tools, grease guns and more. It is equipped with two handles on the side to make it easy to carry. With the help of the included quick-lock pin the container can be closed rapidly. Only for front installation.
Lockable filler cap DEF tank
Locking the DEF tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable filler cap fuel tank
Locking the diesel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable fuel tank
Locking the fuel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Security door lock kit
The security door lock kit features an individual key system that prevents misuse of the standard ignition key. This field kit provides individual security by individual keys for all equipment kept inside the cab. The kit comes with four keys, in case of damage or loss a blank key can be ordered. The security door lock kit protects from vandalism and theft.
Toolbox, with or without front loader
The toolbox can be used to organize, carry, and protect tools. There are two available versions: the toolbox with front loader and the one without it.
Lockable hood latch
Locking the hood with an individual key, different from the standard ignition key, provides individual security against vandalism and theft.
Part number |
Installation instructions |
Description |
Compatible models |
AL120005 |
---
|
45-L (12-gal.) storage container |
6110M – 6195M |
AL211572 |
--- |
Lockable filler cap DEF tank |
6110M – 6120M |
AL223266 |
--- |
Lockable fuel tank |
6110M – 6120M |
AL213203 |
--- |
Lockable filler cap fuel tank |
6110M – 6196M |
AL71345 |
--- |
Security door lock kit |
6110M – 6195M |
BL16319 |
MHM1853 |
Toolbox with front loader |
6110M – 6120M |
BL16468 |
MHM1853 |
Toolbox without front loader |
6110M – 6120M |
BL16761 |
MHM1886 |
Lockable hood latch |
6110M – 6120M |
AL204829 |
MHM1519 |
Toolbox |
6110M – 6195M |
BL16363 |
MHM1886 |
Lockable hood latch |
6110M – 6140M |
BL16365 |
MHM1886 |
Lockable hood latch |
6140M – 6195M |
45-L (12-gal.) storage container
With a capacity of 45-L (12-gal.) and a 45-kg (99-lb) maximum payload, this sheet metal storage container offers additional space for items like rubber boots, oil cans, bulky tools, grease guns and more. It is equipped with two handles on the side to make it easy to carry. With the help of the included quick-lock pin the container can be closed rapidly. Only for front installation.
Lockable filler cap DEF tank
Locking the DEF tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable filler cap fuel tank
Locking the diesel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Lockable fuel tank
Locking the fuel tank with an individual key, different from the standard ignition key, provides individual security against vandalism.
Security door lock kit
The security door lock kit features an individual key system that prevents misuse of the standard ignition key. This field kit provides individual security by individual keys for all equipment kept inside the cab. The kit comes with four keys, in case of damage or loss a blank key can be ordered. The security door lock kit protects from vandalism and theft.
Toolbox, with or without front loader
The toolbox can be used to organize, carry, and protect tools. There are two available versions: the toolbox with front loader and the one without it.
Lockable hood latch
Locking the hood with an individual key, different from the standard ignition key, provides individual security against vandalism and theft.
Part number |
Installation instructions |
Description |
Compatible models |
AL120005 |
---
|
45-L (12-gal.) storage container |
6110M – 6195M |
AL211572 |
--- |
Lockable filler cap DEF tank |
6110M – 6120M |
AL223266 |
--- |
Lockable fuel tank |
6110M – 6120M |
AL213203 |
--- |
Lockable filler cap fuel tank |
6110M – 6196M |
AL71345 |
--- |
Security door lock kit |
6110M – 6195M |
BL16319 |
MHM1853 |
Toolbox with front loader |
6110M – 6120M |
BL16468 |
MHM1853 |
Toolbox without front loader |
6110M – 6120M |
BL16761 |
MHM1886 |
Lockable hood latch |
6110M – 6120M |
AL204829 |
MHM1519 |
Toolbox |
6110M – 6195M |
BL16363 |
MHM1886 |
Lockable hood latch |
6110M – 6140M |
BL16365 |
MHM1886 |
Lockable hood latch |
6140M – 6195M |
Rear Axle
Rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up times
Part number |
Installation instructions |
Description |
Compatible models |
AL156776 |
MHM804 |
Hub extension 30 mm (1.2 in.), rear, tread adjustment |
6110M – 6195M |
AL156777 |
--- |
Hub extension 111 mm (4.4 in.), rear, tread adjustment |
6110M – 6195M |
BL15127 |
MHM1574 |
Hub extension 94 mm (3.7 in.), rear, tread adjustment |
6110M – 6195M |
BL15128 |
MHM1574 |
Hub extension 219 mm (8.6 in.), rear, tread adjustment |
6110M – 6195M |
Rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up times
Part number |
Installation instructions |
Description |
Compatible models |
AL156776 |
MHM804 |
Hub extension 30 mm (1.2 in.), rear, tread adjustment |
6110M – 6195M |
AL156777 |
--- |
Hub extension 111 mm (4.4 in.), rear, tread adjustment |
6110M – 6195M |
BL15127 |
MHM1574 |
Hub extension 94 mm (3.7 in.), rear, tread adjustment |
6110M – 6195M |
BL15128 |
MHM1574 |
Hub extension 219 mm (8.6 in.), rear, tread adjustment |
6110M – 6195M |
Rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up times
Part number |
Installation instructions |
Description |
Compatible models |
AL156776 |
MHM804 |
Hub extension 30 mm (1.2 in.), rear, tread adjustment |
6110M – 6195M |
AL156777 |
--- |
Hub extension 111 mm (4.4 in.), rear, tread adjustment |
6110M – 6195M |
BL15127 |
MHM1574 |
Hub extension 94 mm (3.7 in.), rear, tread adjustment |
6110M – 6195M |
BL15128 |
MHM1574 |
Hub extension 219 mm (8.6 in.), rear, tread adjustment |
6110M – 6195M |
Rear axle extensions are available to match different tread settings.
Benefit
- Optimal track width for vegetables or crop growing
- Easy installing of the track extension
- Less set-up times
Part number |
Installation instructions |
Description |
Compatible models |
AL156776 |
MHM804 |
Hub extension 30 mm (1.2 in.), rear, tread adjustment |
6110M – 6195M |
AL156777 |
--- |
Hub extension 111 mm (4.4 in.), rear, tread adjustment |
6110M – 6195M |
BL15127 |
MHM1574 |
Hub extension 94 mm (3.7 in.), rear, tread adjustment |
6110M – 6195M |
BL15128 |
MHM1574 |
Hub extension 219 mm (8.6 in.), rear, tread adjustment |
6110M – 6195M |
Rear Fenders
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear fender extension
Rear fenders protect tractor from dirt and other splashing objects. These are available in various versions depending on the rear wheel and rear axle dimensions.
Part number |
Installation instructions |
Description |
Compatible models |
AL174767
|
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6195M |
AL174769
|
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
|
BL15292 |
MHM1105 |
Rear fender extension 2794 X 381 mm (110 X 15 in.) |
6110M – 6120M, 6130M – 6195M |
BL15293 |
MHM1105 |
Rear fender extension 4862 X 508 mm (190 X 20 in.) |
Mud guards
Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris. This kit includes a left-handed and right-handed mud guard and mounting parts.
Part number |
Installation instructions |
Description |
Compatible models |
BL16486 |
MHM1887 |
Mud guards |
6110M – 6120M |
BL16487 |
MHM1887 |
||
BL16116 |
MHM1117 |
6110M – 6140M |
Rear fender extension
The fender increases the coverage over the rear of the tire, decreasing the amount of mud or debris buildup on the cab's windows, selective control valve (SCV) stack, hitch, and drawbar.
With the rear fender BL16548 the tractor can be covered by 2.530 mm (0.09 in.). To reach the full cover of 2.730 mm (0.1 in.), the fender extension BL16550 needs to be ordered and attached.
Part number |
Installation instructions |
Description |
Compatible models |
BL16548
|
MHM1909 |
Rear fender extension - overall coverage 2.530 mm (0.09 in.) |
6110M - 6195M |
BL16550
|
MHM1909 |
Fender extension - overall coverage 2.730 mm (0.1 in.) |
Rear Wheel Weights
Backup alarm
Rear wheel weights are attached to the tractor by affixing the weight to the wheel disc utilizing installation holes. Depending on the amount of rear wheel weight required, there is a range of rear wheel weights for every application.
Rear wheel reinforcement with 203-mm (8-in.) bolt circle diameter (BCD)
For heavy field use, this retrofit kit can be used to reinforce the rear wheels (on flange axle with fine thread). The rear wheel reinforcements are screwed to the rim disc. Advantage: More stability for the rear wheels during heavy field work.
Part number |
Installation instructions |
Description |
Compatible models |
BL15934
|
MHM794 |
Rear wheel reinforcement with 203-mm (8-in. BCD |
6110M – 6195M |
Adapter for rear wheel weights quick mount, BCD 335 mm (13.2 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD = 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb)
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb)
Fits on tractors with adapter plate BL15909 (BCD=275 mm [10.8 in.]) or BL15894 (BCD=335 mm [13.2 in.])
Part number |
Installation instructions |
Description |
Compatible models |
BL15894 |
--- |
Adapter for rear wheel weights quick mount, BCD = 335 mm (13.2 in.) |
6110M – 6195M |
BL15909 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16233 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16249 |
--- |
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb) |
6110M – 6195M |
BL16250 |
--- |
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb) |
6110M – 6195M |
Backup alarm
Rear wheel weights are attached to the tractor by affixing the weight to the wheel disc utilizing installation holes. Depending on the amount of rear wheel weight required, there is a range of rear wheel weights for every application.
Rear wheel reinforcement with 203-mm (8-in.) bolt circle diameter (BCD)
For heavy field use, this retrofit kit can be used to reinforce the rear wheels (on flange axle with fine thread). The rear wheel reinforcements are screwed to the rim disc. Advantage: More stability for the rear wheels during heavy field work.
Part number |
Installation instructions |
Description |
Compatible models |
BL15934
|
MHM794 |
Rear wheel reinforcement with 203-mm (8-in. BCD |
6110M – 6195M |
Adapter for rear wheel weights quick mount, BCD 335 mm (13.2 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD = 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb)
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb)
Fits on tractors with adapter plate BL15909 (BCD=275 mm [10.8 in.]) or BL15894 (BCD=335 mm [13.2 in.])
Part number |
Installation instructions |
Description |
Compatible models |
BL15894 |
--- |
Adapter for rear wheel weights quick mount, BCD = 335 mm (13.2 in.) |
6110M – 6195M |
BL15909 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16233 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16249 |
--- |
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb) |
6110M – 6195M |
BL16250 |
--- |
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb) |
6110M – 6195M |
Backup alarm
Rear wheel weights are attached to the tractor by affixing the weight to the wheel disc utilizing installation holes. Depending on the amount of rear wheel weight required, there is a range of rear wheel weights for every application.
Rear wheel reinforcement with 203-mm (8-in.) bolt circle diameter (BCD)
For heavy field use, this retrofit kit can be used to reinforce the rear wheels (on flange axle with fine thread). The rear wheel reinforcements are screwed to the rim disc. Advantage: More stability for the rear wheels during heavy field work.
Part number |
Installation instructions |
Description |
Compatible models |
BL15934
|
MHM794 |
Rear wheel reinforcement with 203-mm (8-in. BCD |
6110M – 6195M |
Adapter for rear wheel weights quick mount, BCD 335 mm (13.2 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD = 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb)
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb)
Fits on tractors with adapter plate BL15909 (BCD=275 mm [10.8 in.]) or BL15894 (BCD=335 mm [13.2 in.])
Part number |
Installation instructions |
Description |
Compatible models |
BL15894 |
--- |
Adapter for rear wheel weights quick mount, BCD = 335 mm (13.2 in.) |
6110M – 6195M |
BL15909 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16233 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16249 |
--- |
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb) |
6110M – 6195M |
BL16250 |
--- |
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb) |
6110M – 6195M |
Backup alarm
Rear wheel weights are attached to the tractor by affixing the weight to the wheel disc utilizing installation holes. Depending on the amount of rear wheel weight required, there is a range of rear wheel weights for every application.
Rear wheel reinforcement with 203-mm (8-in.) bolt circle diameter (BCD)
For heavy field use, this retrofit kit can be used to reinforce the rear wheels (on flange axle with fine thread). The rear wheel reinforcements are screwed to the rim disc. Advantage: More stability for the rear wheels during heavy field work.
Part number |
Installation instructions |
Description |
Compatible models |
BL15934
|
MHM794 |
Rear wheel reinforcement with 203-mm (8-in. BCD |
6110M – 6195M |
Adapter for rear wheel weights quick mount, BCD 335 mm (13.2 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Adapter for rear wheel weights quick mount, BCD = 275 mm (10.8 in.)
Adapter plates are required to attach rear wheel weights.
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb)
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb)
Fits on tractors with adapter plate BL15909 (BCD=275 mm [10.8 in.]) or BL15894 (BCD=335 mm [13.2 in.])
Part number |
Installation instructions |
Description |
Compatible models |
BL15894 |
--- |
Adapter for rear wheel weights quick mount, BCD = 335 mm (13.2 in.) |
6110M – 6195M |
BL15909 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16233 |
--- |
Adapter for rear wheel weights quick mount, BCD = 275-mm (10.8-in.) BCD |
6110M – 6195M |
BL16249 |
--- |
Rear wheel weights quick mount, 2 x 100 kg (2 x 242.5 lb) |
6110M – 6195M |
BL16250 |
--- |
Rear wheel weights quick mount, 2 x 250 kg (2 x 551 lb) |
6110M – 6195M |
Seat
Instructional seat
For an instructional seat to train new operators or diagnosing machine problems, an instructional seat is available as a factory-installed or field-installed attachment.
The seat mounts on the inside fender wall and can be folded out of the way when not in use. All instructional seat kits come complete with a seat belt.
CAUTION: The instructional seat has been approved only for training operators or diagnosing machine problems. Keep all other riders off the tractor and equipment. Always wear your seat belt.
Selective Control Valves
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
To retrofit mechanical SCVs the following kits must be ordered.
M-SCVs are only available if the tractor is equipped with the right-hand console. Then up to four M-SCVs are possible, or three plus additional pressure supply. To operate an additional fourth M-SCVs a mechanical joystick is required.
The tractor can be equipped with two different types of M-SCVs: Standard (Series 200) and Premium (Series 450).
Standard couplers (Series 200) offer a lock function that holds the control lever in the raise or lower position until it is moved manually. All M-SCVs or E-SCV feature four positions: neutral, raise, lower, and float.
BL16272
BL16273
BL16274
BL16075
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
BL16076
NOTE: Only available if the tractor is equipped with the right-hand console.
Order oil lines and lever according to tractor specification in addition.
Power beyond reduces energy losses of remote circuits. In this system, a direct line to the implement bypasses the tractor directional valve, which is located on the implement with a pressure compensator.Power beyond allows the supply of hydraulic oil to implements with own control valves (for example, electrohydraulic valves on trailed silage wagons and balers) or hydraulic motors (for example, a vacuum fan on a planter or a pump on a sprayer). It is a dedicated plate located on the right-hand side of the rockshaft providing four ports: pressure, load sensing (LS), pressure-free return, and motor case drain. Use power beyond when:
- Implement has its own control valve governing the amount of oil required via load sensing.
- No other SCV outlet is available.
BL15671
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Female/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15672
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15673
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 19 cm (7.5 in.) Male/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
BL15735
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
R Port: Black coupler size 12.5 (5 in.)/Adapter ISO 6149-3 M27x2
D Port: Yellow coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M27x2
This set includes two couplings with internal thread or flat couplings with dust caps for LS. This set of parts provides the connection options for the pressure and return hoses as well as the LS signal from the attachment on the tractor.
Advantages:
- Allows additional supply of the hydraulic oil pressure required for different applications
- Quick couplings simplify connection or disconnection
BL15736
If the operator wants hydraulic quick-coupler according to ISO 16028 FF w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: ORANGE coupler size 6.4 cm (2.5 in.)/Adapter ISO 6149-3 M14x1,5
BL15737
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 19 cm (7.5 in.) / Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL15738
If the operator wants hydraulic quick-coupler according to ISO 7241-A w the following sizes:
P Port: Red coupler size 12.5 cm (5 in.)/Adapter ISO 6149-3 M22x1,5
LS Port: Orange coupler size 10 cm (3.9 in.)/Adapter ISO 6149-3 M14x1,5
BL16088
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16089
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
BL16090
Allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit. Useful for hydraulic motors that are susceptible to damage if return coupler reduces (block) the oil flow.
The tractor can be equipped with the premium E-SCV (Series 450). Either four SCVs or three SCVs plus additional pressure supply is possible. All main functions can be controlled via the dial on the right-hand console and on the cornerpost display.
BL16077
NOTE: For tractors up to SN9771392.
Order software kit AL220344, oil lines and lever according to tractor specification in addition.
BL16793
The two electronic SCV control levers are located on the right console
BL16784
BL16792
Part number |
Installation instructions |
Description |
Compatible models |
BL15671 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15672 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15673 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15735 |
MHM1702 |
Oil return coupler |
6110M – 6195M |
BL15736
|
MHM1702 |
Flat-face coupler for power beyond |
6110M – 6195M |
BL15737 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL15738 |
MHM1702 |
ISO-A coupler for power beyond |
6110M – 6195M |
BL16272 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16273 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16274 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16275 |
MHM1764 |
Lever, M-SCV, 200 or 450 Series Position 4 |
6110M – 6195M |
BL16075 |
MHM1764 |
M-SCV, 200 or 450 Series Position 3 |
6110M – 6195M |
BL16076 |
MHM1764 |
M-SCV, 200 Or 450 Series Position 4 |
6110M – 6195M |
BL16077 |
MHM1765 |
E-SCV, 450 Series Position 4 |
6110M – 6195M |
BL16088 |
MHM1771 |
Power beyond with external pressure free return |
6110M – 6120M |
BL16089 |
MHM1771 |
Power beyond without external pressure free return |
6110M – 6120M |
BL16090
|
MHM1771 |
External pressure free return without power beyond |
6110M – 6120M |
BL16784 |
MHM1765 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16792 |
MHM1947 |
E-SCV, 450 Series, Position 3 |
6110M – 6140M |
BL16793 |
MHM1947 |
E-SCV, 450 Series, Position 4 |
6110M – 6140M |
Wagon Hitch
A great variety of wagon hitch solutions fit any application. John Deere K80 and piton fix hitches provide high load capacities combined with easy hooking and operating. The K80 ball-type hitch is the comfortable solution for transport work or towing implements with frequent load changes. The perfect fit of the ball shape prevents backlash of trailers hooked on the tractor. Forced steering systems are required for trailers with rear axle steering.
Ball type insert for wagon hitch 3 in 1
The ball-type wagon hitch can easily be inserted horizontally in an already-mounted bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 4000 kg (8818.5 lb)
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type
The ball head insert can be attached without tools.
Advantages:
- Coupling device replaceable without tools
- High-quality product from John Deere
- Large trailers with up to 4-ton (8818.5-lb) vertical load can be towed
- Excellent ride comfort and easy coupling
NOTE: The ball-type insert can be ordered separately or as a complete kit, including a ball-type insert and rail.
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type
Height adjustable piton type hitch.
Piton fix insert for wagon hitch 3 in 1
The benefit of the piton fix wagon hitch is the deep attachment option for trailers. This wagon hitch is locked manually with a bolt. It can easily be inserted into the bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 3000 kg (6613.86 lb)
Forced steering system, left-hand and right-hand
Forced steering systems allow easy coupling of trailers with forced steering and enable the steering of rear implement axles.
Part number |
Installation instructions |
Description |
Compatible models |
BL16155 |
--- |
Ball type insert for wagon hitch 3 in 1 |
6110M – 6195M |
BL16381 |
MHM1859 |
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type |
6110M – 6195M |
BL16152 |
--- |
Forced steering system, left-hand and right-hand |
6110M – 6195M |
BL15959
|
--- |
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type |
6110M – 6195M |
BL16383
|
MHM1859 |
Piton fix insert for wagon hitch 3 in 1 |
6110M – 6195M |
A great variety of wagon hitch solutions fit any application. John Deere K80 and piton fix hitches provide high load capacities combined with easy hooking and operating. The K80 ball-type hitch is the comfortable solution for transport work or towing implements with frequent load changes. The perfect fit of the ball shape prevents backlash of trailers hooked on the tractor. Forced steering systems are required for trailers with rear axle steering.
Ball type insert for wagon hitch 3 in 1
The ball-type wagon hitch can easily be inserted horizontally in an already-mounted bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 4000 kg (8818.5 lb)
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type
The ball head insert can be attached without tools.
Advantages:
- Coupling device replaceable without tools
- High-quality product from John Deere
- Large trailers with up to 4-ton (8818.5-lb) vertical load can be towed
- Excellent ride comfort and easy coupling
NOTE: The ball-type insert can be ordered separately or as a complete kit, including a ball-type insert and rail.
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type
Height adjustable piton type hitch.
Piton fix insert for wagon hitch 3 in 1
The benefit of the piton fix wagon hitch is the deep attachment option for trailers. This wagon hitch is locked manually with a bolt. It can easily be inserted into the bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 3000 kg (6613.86 lb)
Forced steering system, left-hand and right-hand
Forced steering systems allow easy coupling of trailers with forced steering and enable the steering of rear implement axles.
Part number |
Installation instructions |
Description |
Compatible models |
BL16155 |
--- |
Ball type insert for wagon hitch 3 in 1 |
6110M – 6195M |
BL16381 |
MHM1859 |
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type |
6110M – 6195M |
BL16152 |
--- |
Forced steering system, left-hand and right-hand |
6110M – 6195M |
BL15959
|
--- |
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type |
6110M – 6195M |
BL16383
|
MHM1859 |
Piton fix insert for wagon hitch 3 in 1 |
6110M – 6195M |
A great variety of wagon hitch solutions fit any application. John Deere K80 and piton fix hitches provide high load capacities combined with easy hooking and operating. The K80 ball-type hitch is the comfortable solution for transport work or towing implements with frequent load changes. The perfect fit of the ball shape prevents backlash of trailers hooked on the tractor. Forced steering systems are required for trailers with rear axle steering.
Ball type insert for wagon hitch 3 in 1
The ball-type wagon hitch can easily be inserted horizontally in an already-mounted bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 4000 kg (8818.5 lb)
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type
The ball head insert can be attached without tools.
Advantages:
- Coupling device replaceable without tools
- High-quality product from John Deere
- Large trailers with up to 4-ton (8818.5-lb) vertical load can be towed
- Excellent ride comfort and easy coupling
NOTE: The ball-type insert can be ordered separately or as a complete kit, including a ball-type insert and rail.
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type
Height adjustable piton type hitch.
Piton fix insert for wagon hitch 3 in 1
The benefit of the piton fix wagon hitch is the deep attachment option for trailers. This wagon hitch is locked manually with a bolt. It can easily be inserted into the bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 3000 kg (6613.86 lb)
Forced steering system, left-hand and right-hand
Forced steering systems allow easy coupling of trailers with forced steering and enable the steering of rear implement axles.
Part number |
Installation instructions |
Description |
Compatible models |
BL16155 |
--- |
Ball type insert for wagon hitch 3 in 1 |
6110M – 6195M |
BL16381 |
MHM1859 |
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type |
6110M – 6195M |
BL16152 |
--- |
Forced steering system, left-hand and right-hand |
6110M – 6195M |
BL15959
|
--- |
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type |
6110M – 6195M |
BL16383
|
MHM1859 |
Piton fix insert for wagon hitch 3 in 1 |
6110M – 6195M |
A great variety of wagon hitch solutions fit any application. John Deere K80 and piton fix hitches provide high load capacities combined with easy hooking and operating. The K80 ball-type hitch is the comfortable solution for transport work or towing implements with frequent load changes. The perfect fit of the ball shape prevents backlash of trailers hooked on the tractor. Forced steering systems are required for trailers with rear axle steering.
Ball type insert for wagon hitch 3 in 1
The ball-type wagon hitch can easily be inserted horizontally in an already-mounted bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 4000 kg (8818.5 lb)
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type
The ball head insert can be attached without tools.
Advantages:
- Coupling device replaceable without tools
- High-quality product from John Deere
- Large trailers with up to 4-ton (8818.5-lb) vertical load can be towed
- Excellent ride comfort and easy coupling
NOTE: The ball-type insert can be ordered separately or as a complete kit, including a ball-type insert and rail.
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type
Height adjustable piton type hitch.
Piton fix insert for wagon hitch 3 in 1
The benefit of the piton fix wagon hitch is the deep attachment option for trailers. This wagon hitch is locked manually with a bolt. It can easily be inserted into the bracket.
- D-value: 97,1 kN (21,829 lbf)
- Maximum vertical load: 3000 kg (6613.86 lb)
Forced steering system, left-hand and right-hand
Forced steering systems allow easy coupling of trailers with forced steering and enable the steering of rear implement axles.
Part number |
Installation instructions |
Description |
Compatible models |
BL16155 |
--- |
Ball type insert for wagon hitch 3 in 1 |
6110M – 6195M |
BL16381 |
MHM1859 |
Wagon hitch for 290-mm (11.4-in.) rail, height adjustable, ball type |
6110M – 6195M |
BL16152 |
--- |
Forced steering system, left-hand and right-hand |
6110M – 6195M |
BL15959
|
--- |
Wagon hitch for 290-mm (11.4-in.) rail adjustable, piton type |
6110M – 6195M |
BL16383
|
MHM1859 |
Piton fix insert for wagon hitch 3 in 1 |
6110M – 6195M |
Videos
© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By