3032E
Compact Utility Tractor
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Category 1 3-pt hitch compatible with dozens of implements
Starting At:
$24,769.00
View Product Brochure
Features
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.
- All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
- Upper bushing
- Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
- Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
- Lower bushings
- Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
- Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Specs & Compare
Key Specs | 3032E Current Model |
Engine power (gross) | 22.9 kW 31.2 hp |
Power take-off (PTO) power | 18.6 kW 25 hp |
Steering hydraulics | 15 L/min 4 gpm |
Implement hydraulics | 20.2 L/min 5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Optional |
Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Wheelbase | 159.5 cm 62.8 in. |
Engine | |
Family | EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 22.9 kW 31.2 hp |
Power take-off (PTO) power | 18.6 kW 25 hp |
Rated engine speed | 2500 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 87 Nm 64.2 lb-ft |
Fuel tank capacity | 28.5 L 7.5 U.S. gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW 1.9 hp |
Fuel system | |
Type | High pressure common rail direct injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Optional transmission; forward/reverse | |
Left-hand reverser | No |
Transmission gear ranges | |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 798 kg 1760 lb Rear 1197 kg 2640 lb |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
Pump type | Dual gear |
Maximum operating pressure | 172.4 bar 2500 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
3-point hitch | |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Power take-off (PTO) | |
Standard | 540 rpm at 2500 rpm |
Optional | |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 4.5 L 4.8 qt |
Transmission and hydraulic system | |
Final drive | |
Type | Bull Gear |
Differential lock | |
Operator station | |
Rollover protective structure | Type Foldable ASABE S478 |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | |
Visibility | |
Air conditioning, temperature differential | |
Doors | |
Noise rating | |
Seat equipment | |
Dimensions | |
Wheelbase | 159.5 cm 62.8 in. |
Front axle clearance | 36.3 cm 14.3 in. |
Turning radius with brakes | |
Turning radius without brakes | 2.9 m 9.4 ft |
Limited slip differential | |
Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Tires | |
Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15 |
Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20 |
Front tread range | |
Rear tread spacing | |
Miscellaneous | |
Toolbox | |
Tilt steering wheel | |
12-V Outlet | |
Additional information | |
Offers & Discounts
Accessories & Attachments
Accessories
Backhoes
Front Weights
Front Wheels and Tires
Hydraulics
Lighting
Open Operator's Station
Rear Power Take-Off (PTO)
Rear Wheels and Tires
Three-Point Hitch
Reviews
Location: South Carolina
Length of Ownership: 1month
Usage: Weekly
I have owned my JD 3032E around d a month now and have already pt 32 hours on it. I am very happy with the power and agility of this model. The bucket and box blade were perfect implements for what I need to do around my property.
Location: Searsport Maine
Length of Ownership: 1yearOrLonger
Usage: Daily
I bought my tractor new in August of 2019. I currently have about 700 hours on it. I’ve had one issue that required the tractor going back for service. That was a cylinder for the steering went out. I’m not a fan of the plastic pieces on the tractor. I use it year round in every season. In the dead of winter in Maine, the plastic pieces become brittle and crack or break. But, the metal is strong, the welds are good and the engine is good. I also bought the backhoe attachment when I purchased the tractor. It works, but not nearly the power I wish it had. It pulls a scraper blade just fine, and this summer I will try out a fence post auger I recently bought. I’m a disabled vet, and I cannot get around to do the things I use to. This tractor has definitely made my life easier. It helps me clear the land of trees and rocks, to helping me create pastures for gardens and animals. With the exception of Jan and Feb I am using the tractor almost daily. I gave it 4 stars, as I do not like plastic on tractors and it also has a catalytic converter. I couldn’t believe that. Outside of regular services for oil or whatever it has been reliable. I will probably upgrade to a bigger one some day as I have had some times where I could have used more power. Good tractor.
Location: Upstate, NY
Length of Ownership: 1yearOrLonger
Usage: Daily
Have had this tractor for five years, and overall it has done a good job. Forced dealer to fit it with agricultural tires instead of the stock industrial tires, which is one of the best moves. Have used it for light planting, brush clearing, skidding, and mowing of 17 acres. Has been very difficult to find weights, as the bolt pattern does not match the JD stock. Have also had ongoing problems with the brakes since the first three months, and dealer will not even discuss the issue until we pay for pick-up and shop time.
Location: Florida
Length of Ownership: 1yearOrLonger
Usage: Weekly
I bought mine in 9/18. I have 190 hours on it & it has been a trouble free great tractor.
Location: Huntingdon TN
Length of Ownership: 3months
Usage: Weekly
Honestly was kind of sceptical of only having 25hp. It really surprised me how it can walk up and down my hills. Only issue I had was 1 of the lines to the front loader was finger tight. A wrench and 2 min later was fixed. Have 85 hrs on mine 90% is useing the pto. Looking forward to many more years of use.. will update if anything changes
Location: Iowa
Length of Ownership: 1week
Usage: Daily
I bought this machine with low expectations but was pleasantly surprised, after my skid steer went down and no time to fix it I decided I needed to add a back up for my skid steer when it went down, functionality is great and power is spot on. I have approximately 10 hours on the machine and I have not found a deal breaking flaw, i have found a few little things that i would change so far, key switch is much like ball hitch on a pickup just waiting for my knee to base into it, the push button controls on the dash are not lighted when the lights are on and in the dark you cant see what you are are push without another source of light, I like the speed of the loader functions but it would be nice if the curl and lower was a little faster, the forward driving lights are good until the loader bucket is in the way, I added the Deere led aux front light kit and one rear facing light and now its great. overall I am very pleased with this tractor and it does great for what i use it for, my skid steer may do it better and faster but the 3032E can hold its own. I also added the bluetooth module for live up to date stats!
Location: Tehachapi, California
Length of Ownership: 6months
Usage: Weekly
I bought my John Deere 3032E for ranch work in the Tehachapi Mountains. It has impressed me with every use . It is incredibly useful and I am very pleased that I chose it .
Location: Dinwiddie , va 23841
Length of Ownership: 1yearOrLonger
Usage: Daily
800 hrs. and going strong. Comfortable to operate for hours at a time. There's no job it can't handle.
Pros:
- great on fuel
- turns on a dime
Location: Wisc
Length of Ownership: 6months
Usage: Weekly
Easy to drive. Enough power. Does the job. Many attachments available. Great dealer support.
Location: Florida
Length of Ownership: 3months
Usage: Weekly
I recently purchased my new John Deere 3032E from my local dealer. I spent approximately 6 months researching the different models starting out with the 1 and 2 series tractors. The tractor has performed flawlessly. The front end loader and attachments are easy to operate and change from the bucket to the pallet forks. The rear hitch with the Imatch system is a great improvement. I was leaning towards a 3025E for sometime but decided to go with the higher horsepower model and I am very glad I did. The John Deere MX5 rotary cutter works perfectly with the 3032E. I highly recommend checking out the John Deere 3032E before making a purchase.
Pros:
- great value
Videos
© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By