×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

XUV590M

Crossover Utility Vehicle


  • Our fastest Mid-Size XUV with power steering
  • Easier shifting, with integrated park position
  • Electronic switch for instant 4WD engagement
  • Enhanced dash display for operation at a glance



Starting At:

$14,949.00

View Product Brochure

Features

Precision-engineered drive system optimizes acceleration, hauling, towing, and hill-climbing capabilities

The Gator™ XUV Mid-Size Crossover Series Utility Vehicles have a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive (shown on XUV590 engine) Variable-speed drive (shown on XUV590 engine)

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • Ability to creep along slowly to maneuver in tight spaces
  • Standard full-clutch enclosure with a high intake and exhaust ensures a dry belt when crossing water
    • High-speed fan on drive clutch provides longer belt and clutch life by keeping components cool
  • TEAM® industry clutches provide high performance and longevity 

How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Four-wheel drive (4WD), transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
XUV590 transaxle XUV590 transaxle
XUV560/XUV590 MFWD XUV560/XUV590 MFWD

4WD

  • Selectable 4WD system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
    • More control descending hills with 4WD engaged, as all four wheels help slow the vehicle down
      • Clutch engagement still necessary to prevent free coasting

Transaxle

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • Cast-aluminum design for lower weight
  • Helical forward and reverse gears are used for quiet operation
  • Rear traction assist (differential lock) is controlled with an electronic rocker switch
    • NOTE: Locked differential design may increase scuffing of the turf during turns because the rear wheels are turning at the same speed through a turn.
  • Contains gear-case for transferring power to the MFWD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Vertically oriented oil drain for easy maintenance
  • Protected by a skid plate

MFWD

  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
  • Near instantaneous torque to the front wheels after engaging switch
  • Vertically oriented oil drain for easy maintenance
  • Protected by a steel skid plate and frame

Drive shafts

  • Front and rear CV shaft diameter measures 23 mm (0.9 in.) and designed for high engine torque
  • Propshaft (transaxle to MFWD shaft) diameter measures 23.8 mm (0.94 in.) and designed for high engine torque
  • All CV shaft joints are maintenance free and protected by exclusive inboard and outboard thermoplastic elastomer (TPE) boots for durability. TPE material is more puncture resistant than neoprene, which is used by many competitors.

TEAM is a trademark of TEAM Industries.

Delivers quick acceleration and provides a top speed of more than 77 km/h (48 mph)
586-cc (35.8-cu in.) gasoline engine 586-cc (35.8-cu in.) gasoline engine
Radiator Radiator

The Gator™ XUV590E and XUV590M Crossover Series Utility Vehicle is powered by a 586-cc (35.8-cu in.), inline twin-cylinder, electronic fuel-injected (EFI) gasoline engine. The engine is electronically controlled through an engine control unit (ECU) to ensure optimal engine performance.

 

The engine offers the following performance and reliability features:

  • 23.8 kW (32 hp*) at 5600 rpm
  • 77 km/h (48 mph) top speed
  • Electronic fuel injection (EFI) with engine control unit (ECU)
  • Liquid cooled
  • Designed for cold-weather starting (tested to -28.9°C [-20°F])
  • Wet-sump lubrication system
  • Spin-on oil filter and oil pan drain accessible through skid plate for easy servicing
  • High air-flow air filter
  • 875-W (65 maximum amp) charging system for accessory capability (see engine section for alternator output curve)
  • Spark-arresting muffler is United States Forest Service (USFS) approved
  • Low fuel consumption and large 28-L (7.4-U.S. gal.) fuel tank
  • Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

 

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

Designed for all-day comfort with many vehicle conveniences
Instrument panel and backlit switches Instrument panel and backlit switches
Sealed under-hood storage Sealed under-hood storage
Ergonomically placed controls Ergonomically placed controls
In-dash cup holders and sealed glove box In-dash cup holders and sealed glove box
S4 optional under-seat storage S4 optional under-seat storage
  • Display features include:
    • Speed
    • rpm
    • Fuel
    • Mechanical front-wheel drive (MFWD)/rear diff-lock
    • Gear position
    • Hour meter
    • Service interval warning light
  • Operator-centric design provides class-leading ergonomics and comfortable seats
    • Easy entry/exit and pass through for operator and passenger
    • Optimal seating position provides more legroom
    • Automotive-like ergonomics
    • Excellent comfort while driving
  • Best-in-class sealed storage volume of 34 L (9 gal.) with a large in-dash glove box and under hood storage. An additional 34 L (9 gal.) of under-seat storage is available on the S4 models.
  • Hinged hood rotates open without tools for access to storage
  • Side-by-side seating provides ample room for one operator and one passenger
    • Seats tilt forward for ease of service and to keep dry during outdoor storage
  • Two cup holders are located within reach of the operator's station
  • Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
  • Seven predrilled dash switch locations with snap out caps for various electrical accessories
  • Occupant protective structure (OPS) with three-point seat belts and passenger side grab handle located on front post
  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear, neutral, or park.
Large, extra-durable, one-piece cargo box ensures hard-driving performance and longevity

The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly styled exterior pieces are made of TPO for extra durability.

Cargo box tailgate
Tailgate handle Tailgate handle
Tailgate pivot and removal feature Tailgate pivot and removal feature
Removable lanyards Removable lanyards

The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

Cargo box tilt and removal
Integrated handle for manual cargo box tilt (both sides) Integrated handle for manual cargo box tilt (both sides)
Tilted cargo box Tilted cargo box

The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release also functions as the lift lever, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy-to-use attributes makes this cargo box best-in-class.

For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

Integrated tie-down points
Integrated tie-down point in cargo box bed Integrated tie-down point in cargo box bed
Additional tie-down points Additional tie-down points

The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Flip-up D-shaped rings in all four corners inside the cargo box bed
  • Multiple points along the edge of the cargo box side walls
  • Tie-down bars on either side of the cargo box with optional cargo box rail kit. This kit also provides a mounting system using accessories that possess the 25.4-mm (1-in.) quick clamp.
Optional accessories
Cargo box rail system Cargo box rail system
Box mat Box mat
Cargo box wall extensions (shown on RSX) Cargo box wall extensions (shown on RSX)

Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

  • Cargo box rail system
  • Cargo box mat
  • Cargo box wall extensions
  • Spare tire rack
  • Bucket holder
Specifications
Length  82 cm (32.3 in.)
Width 120.9 cm (47.6 in.)
Depth 29.7 cm (11.7 in.)
Volume 0.25 m3 (8.9 cu ft)
Weight capacity 227 kg (500 lb)
Dump angle
Bed height (from ground)
 

45 degrees

76.3 cm (30 in.)

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Four-wheel independent suspension provides unparalleled ride over challenging terrain and excellent handling through corners
XUV front suspension detail XUV front suspension detail

To complement the comfortable operation station, the XUV560 and XUV590 Series are equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

 

The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

Dual A-arm front suspension features include:
  • Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
  • Automotive-style, fully boxed and welded, high-strength steel, lower A-arms to minimize unsprung mass and maximize strength
  • Maintenance-free, rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
  • Anti-dive front suspension geometry provides a solid platform for confident braking
  • Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback
XUV rear suspension detail XUV rear suspension detail
Independent rear suspension features include:
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
Optional Fox™ Shocks are available to factory install

Exclusive aluminum-body, high-pressure monotube FOX racing shocks

  • Fully adjustable spring preload for different driving styles
  • High-pressure nitrogen gas is separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
  • Pressure and heat generation in the monotube is less than a traditional twin-tube shock, allowing for better vehicle control in aggressive conditions.
  • The single aluminum shell of the monotube design allows for more efficient heat rejection and lower overall unsprung mass.
  • Mounting the shaft end of the shock to the suspension arm lowers the unsprung mass of the suspension system, leading to improved suspension response.

NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.

Power steering for excellent handling characteristics and low steering effort
XUV590M with power steering XUV590M with power steering

The Gator™ XUV590M Utility Vehicles are equipped with rack and pinion steering with power steering. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort.

Automotive-type, rack-and-pinion steering features include:

Optional electric power-assist steering (EPAS) system. Features of EPAS include:

  • Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
  • The system is speed sensing and adjusts steering effort as the speed of the vehicle changes.
    • As speed increases there is less steering assist for improved road feel.
    • As speed decreases steering assist increases to give lower steering efforts for improved maneuverability.
  • A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
  • Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.
    • Steel ball-bearings secure the steering shaft and delivers smooth, responsive operation
    • Tight turn radius of 3.7 m (12.3 ft) for excellent maneuverability
    • Completely sealed rack-and-pinion for long life
    • Low steering ratio (lock-to-lock steering wheel rotations) provides more responsive steering and less operator input
    • Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
    • Ackerman steering design provides more responsive steering, decreases tire wear when used on hard surfaces and is turf friendly (see description below)
    • Minimal bump steer eliminates unintended vehicle direction changes when traversing terrain and permits less feedback to the steering wheel (see description below)

 

The tire scrubbing, which also creates unwanted heat and wear in the tire, can be eliminated by turning the inside wheel at a greater angle than the outside one (Ackerman steering).

 

NOTE: Some competitors use parallel steering instead of Ackerman steering.

 

Bump steering defines the change in the forward steering angle (thus wheel position) as the suspension travels through its full motion. A large amount of angular change (5 degrees to 7 degrees) will alter the vehicle's direction and excessively move the steering wheel.

Occupant protective structure (OPS) and occupant side retention (OSR)
XUV590M S4 with OSR nets XUV590M S4 with OSR nets

A dynamically stable vehicle starts with the architectural design; the Gator™ XUV Crossover Series has a low center of gravity, a wide stance, and balance of weight between the front and rear axles.

 

The combination leads to a class-leading static stability factor (SSF) and passing a multitude of dynamic stability tests.

OPS
Standard OPS Standard OPS

Standard OPS with three-point seat belts and OSR nets are shown on the XUV560E.

 

The OPS is Society of Automotive Engineers (SAE) J2194 certified.

OSR
OSR nets (available on XUV560 & XUV590) OSR nets (available on XUV560 & XUV590)
OSR doors (compatible with all XUV590 two-passenger models) OSR doors (compatible with all XUV590 two-passenger models)

Meets American Nation Standards Institute (ANSI) B71.9 certification

  • One-handed operation
  • Easy entry/exit
  • Great visibility

Specs & Compare

ADD MODEL

Key Specs

XUV590M
Current Model
Engine power23.8* kW
32 hp
Cargo box dimensions82 cm x 120.9 cm x 29.7 cm (0.25 m3)
32.3 in. x 47.6 in. x 11.7 in. (8.9 cu ft)
Cargo box capacity (weight)227 kg
500 lb
Towing capacity680 kg
1500 lb
Front suspensionFully independent dual A-arm with adjustable coil-over shocks, 203 mm (8 in.) travel, anti-roll bar
Rear suspensionFully independent with lower A-arm and upper camber link with adjustable coil-over shocks, 203 mm (8 in.) travel
Final driveHigh, low, neutral, reverse transaxle
Four wheel driveDash-lever-actuated four-wheel drive system with limited slip front differential plus locking rear differential
Fuel capacity28 L
7.4 U.S. gal.

Engine

Type4-cycle gas, inline-twin, electronic fuel injection (EFI), overhead valves (OHV)
Displacement586 cc
Power23.8* kW
32 hp
Cooling systemLiquid cooled

Drivetrain

TransmissionContinuously Variable Transmission (CVT) with clutch enclosure
Final driveHigh, low, neutral, reverse transaxle
Four wheel driveDash-lever-actuated four-wheel drive system with limited slip front differential plus locking rear differential
Traction assistPositive locking, mechanically actuated (hand-lever-operated) rear differential lock
Descent controlNot available

Suspension

FrontFully independent dual A-arm with adjustable coil-over shocks, 203 mm (8 in.) travel, anti-roll bar
RearFully independent with lower A-arm and upper camber link with adjustable coil-over shocks, 203 mm (8 in.) travel

Brakes

Type196 mm (7.7 in.) ventilated four-wheel stainless-steel disc brakes with 34.93 mm (1.375 in.) diameter hydraulic twin-piston calipers
Park brakeAutomotive-style, foot-actuated mechanical park brake system

Tires / Wheels

Front
Rear25x10-12 Ancla M-T (Extreme Terrain) 4-ply rating steel wheels or 25x10-12 Terrahawk AT (All Terrain) 4-ply rating steel wheels
Optional: 26x10-14 Maxxis Bighorn 2.0 6-ply rating on various color aluminum alloys

Dimensions / Capacities

Wheelbase1.86 m
72.8 in.
WeightWet weight (includes fuel/fluids): 650 kg
1434 lb
Length2870 mm
113 in.
Width1435 mm
56.5 in.
Height1867 mm
73.5 in.
Tread centersFront: 1220 mm
48 in.
Rear: 1168 mm
46 in.
Ground clearanceMinimum: 267 mm
10.5 in.
Fuel capacity28 L
7.4 U.S. gal.
Cargo box dimensions82 cm x 120.9 cm x 29.7 cm (0.25 m3)
32.3 in. x 47.6 in. x 11.7 in. (8.9 cu ft)
Cargo box capacity (weight)227 kg
500 lb
Payload capacity408 kg
900 lb
Towing capacity680 kg
1500 lb
HitchStandard 50 mm (2 in.) rear receiver with optional 50 mm (2 in.) front receiver with recovery loops

Features

ColorGreen/yellow, olive/black, or Realtree™ Hardwoods HD Camo
Power steeringStandard
Battery / Alternator / Power port340 CCA
65 amp @ 3400 rpm regulated
12 VDC standard outlet
InstrumentationDigital instrument cluster displays critical vehicle information such as speed, engine rpm, fuel level, coolant temperature, trip, odometer, time
StorageTwo cupholders, sealed underhood storage, glove box
SeatingBench seat

Additional information

Country of ManufactureU.S.
Date collected

Offers & Discounts

No current offers.

Accessories & Attachments



Bumper

Constant-Velocity (CV) Guards (Front and Rear) - 592FMBM23309
Front Brushguard - 592FMBM23365
Front Fender Guards - 592FMBM23394
Nerfbar kit - 592FMBUC10291
Rear Bumper - 592FMBM23362

Cargo Box

19 L (5 gal) Pail Holder - 592FMBM23849
Box Mat - 592FMBM23371
Cargo Box Power Lift - 592FMBM24812
Cargo Box Rails - 592FMBM23526
Cargo Box Wall Extensions - 592FMBM23384
Tire Rack - 592FMBM23385

Cover

Front Seat Cover - Black - 592FMLP66658
Front Seat Cover - Camo - 592FMLP66659
Front Seat Cover - Yellow - 592FMLP66449

Lighting

Beacon Light - 592FMBM25553
Beacon Light Harness Kit - 592FMBM26182
Brake and Tail Light Kit - 592FMBUC10807
Brush Guard Light Harness Kit - 592FMBUC10966
Dual Beam LED Headlights (2) - 592FMBM26589
Front OPS/Roof Light Harness Kit - 592FMBM25620
LED Driving Lights (2 Lights) - 592FMBM26215
LED Work Lights (2 Lights) - 592FMBM26216
Occupant Protective Structure (OPS) Switch Bank - 592FMBM24089
Rear OPS/Roof Light Harness Kit - 592FMBM25731
Work Lights (Halogens) - 592FMBM25544

Mirrors

Occupant Protective Structure (OPS) Rear View Mirror - 592FMBM25148
Occupant Protective Structure (OPS) Side Mirrors - 592FMBM24737
Poly Cab Mirror - 592FMBM24796

Operator's Station

Canvas Cab Doors - 592FMBM26001
Door seal kit (2 pass) - 592FMBUC10253
Floor Mat - 592FMBM25743
Front Fender Panel Kit - 592FMBUC10627
Glove Box Lock - 592FMBM24200
Heater Kit - 592FMBUC10184
Occupant Protective Structure (OPS) Rear Panel - 592FMBM25014
Occupant Protective Structure (OPS) Rear Screen - 592FMBM23396
Occupant Side Retention (OSR) Closeout Panels - 592FMBUC10746
Occupant Side Retention (OSR) Half Doors - 592FMBUC10716
Poly Cab Door Closeout Panels - 592FMBM25969
Poly Door Kit, MDUV 2 Pass - 592FMBUC10542
Seat-Belt Comfort Strap (2) - 592FMBM26583
Sport Steering Wheel - 592FMBM23933

Roof

Canvas Roof / Rear Panel - 592FMBM25999
Occupant Protective Structure (OPS) Poly Roof - Black - 592FMBUC10853
Occupant Protective Structure (OPS) Poly Roof- Camo - 592FMBUC11010

Sprayers

25 Gallon Bed Sprayer - 592FMLP39965
45 Gallon Bed Sprayer - 592FMLP39964
HP Standard Gator Boom - 592FMLP22911
High Performance Sprayer Precision Boom (12.5 ft) - 592FMLP22885
High performance boomless nozzles - 592FMLP22884
Tow-Behind Sprayer, 45 gal. (170 L) - 592FMLP20485

Spreaders

17AT Cart - 592FMLPPCT17ATJD
Spreader Hitch and Controls - 592FMLP68757
Utility Cart, 21 Steel - 592FMLPUT21JD

Storage

MOLLE Device Pouch - Black - 592FMLP66151
MOLLE Device Pouch - Camo - 592FMLP66150
MOLLE Fire Extinguisher Pouch - Black - 592FMLP66153
MOLLE Fire Extinguisher Pouch - Camo - 592FMLP66152
MOLLE Large Pouch - Black - 592FMLP66149
MOLLE Large Pouch - Camo - 592FMLP66148
MOLLE Small Pouch - Black - 592FMLP66147
MOLLE Small Pouch - Camo - 592FMLP66146
MOLLE Water Bottle Pouch - black - 592FMLP74688
Molle Water Bottle Pouch - Coyote Brown - 592FMLP74690
Molle Water Bottle Pouch - Real Tree - 592FMLP74689

Winch

WARN VRX 3500 lb Winch - 592FMBUC10681
Winch Accessories Kit - 592FMBM21392
Wireless Winch Remote - 592FMBM26662

Windshield

Abrasion Resistant Half Windshield - 592FMBM25259
Canvas Rear Panel - 592FMBM26000
Full No-Scratch Flip-Open Windshield - 592FMBM23373
OPS Glass Windshield w/ Wiper - 592FMBUC10159
Occupant Protective Structure (OPS) Windshield Washer Kit - 592FMBM25103
Rear Dust Panel - 592FMBM25967

Videos



footer logo

In 1953, Wyatt (JR) Smith bought Smith Tractor Company. Smith originally purchased a Ford tractor dealership until the company took on John Deere products in January of 1987. Since then, Smith Tractor Company has proudly provided John Deere equipment and service throughout Florida & Alabama. Our customer base is built on relationships and in today’s corporate world that is a rare commodity. You will find quite a bit of inventory if you take a trip to one of our locations.

map

Frisco City, AL
3854 Bowden St.
Frisco City, AL 36445
Phone 251-267-2500
Toll Free 800-221-4052 Option 3
Directions

Atmore, AL
8974 Hwy 31
Atmore, AL 36502
Phone 251-368-1720
Toll Free 800-221-4052 Option 2
Directions

Jay, FL
3834 Highway 4
Jay, FL 32565
Phone 850-675-4505
Toll Free 800-221-4052 Option 1
Directions

SUBSCRIBE TO OUR NEWSLETTER

Select a Location

Jay

Atmore

Frisco City

Select a Department

Select a Department

Select a Department

© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo