GA 13131

The Kuhn GA 13131 four-rotor rotary rake is not only synonymous with high work rates, but also links high flexibility and superior quality of work. The uniform windrows they create provide the base for a high performance harvesting chain.

The GA 13131 rotary rake has a reduced maintenance cost due to a comprehensive list of innovative features, including the hydraulic rotor drive. In addition, the boost drive of the rake’s four rotors helps to create perfectly formed windrows. This rake is easy to operate and adjust. All settings are made hydraulically from the tractor seat. The headland sequence can proceed automatically at the touch of a button thanks to a pre-programmed sequence.

Specs

Rake Type	1 central windrow
Number of rotors	4
Working width (m)	8.40 to 12.50
Minimum Windrow Width (cm)	150
Maximum Windrow Width (cm)	240
Swath delivery	Central
Number of tine arms per rotor	11
Number of Raking Wheels	4 per rotor
Number of tines per arm	4
Sequential rotor lift (1 after the other)	Standard
Drive	Hydraulic drive mounted on headstock
Gearboxes	MASTERDRIVE GIII
Tire type	Under rotors : 16x6.50-8 Undercarriage : 500/60x22.5
Transport Height (m)	3.95
Transport width (m)	3
Linkage	2 point on lower link arms
Minimum power requirement for PTO (kW)	70
Minimum power requirement for PTO (hp)	95
Tractor hydraulic equipment	1 SA + 1 free return (or load sensing connection)
Tractor electrical equipment	1 connector 7 pin + 1 tractor wiring harness