Features
Specs & Compare
Key Specs | 512 Current Model |
| Maximum lift height (A) | 2850 mm 112 in. |
| Lift capacity at full height | Measured at pivot (U) 1000 kg 2200 lb |
| Boom breakout force | Measured at pivot (Y) 2019 kg 4451 lb |
| Bucket rollback force capacity | At ground-level line (ZZ) 1410 kgf 3109 lbf |
| Clearance at full height - bucket dumped (C) | 2140 mm 84 in. |
| Dump angle, degrees (E) | 43 degree (angle) |
| Rollback angle, degrees (G) | 30 degree (angle) |
Tractor | |
| Model | 5E Series 2WD Tractor |
| Front tire | 7.5-16 6 PR R1 |
| Rear tire | 13.6-28 6 PR R1 |
| Front axle configuration | |
| Wheelbase | |
| Pump capacity | 11.4 gpm |
| Rated pressure | 2828 psi |
Loader | |
| Base weight | 280.53 kg 618.46 lb |
| Leveling configuration | |
| Bucket used | 1850 mm 73 in. |
| Bucket weight | 159 kg 351 lb |
| Lift capacity at full height | Measured at pivot (U) 1000 kg 2200 lb Measured at 800 mm ahead of pivot (V) 682 kg 1500 lb |
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 1380 kg 3043 lb Measured at 800 mm ahead of pivot (X) 980 kg 2161 lb |
| Boom breakout force | Measured at pivot (Y) 2019 kg 4451 lb Measured at 800 mm ahead of pivot (Z) 1335 kg 2944 lb |
| Bucket rollback force capacity | At maximum height (VV) 979 kgf 2158 lbf At ground-level line (ZZ) 1410 kgf 3109 lbf |
| Dimensions | Maximum lift height (A) 2850 mm 112 in. At full height - bucket level(B) 2605 mm 102.5 in. At full height - bucket dumped (C) 2140 mm 84 in. |
| Overall length (I+F), ft (m) | 3.79 m 12.416 ft |
| Overall height in carry position (J) | 1.442 m 4.75 ft |
| Digging depth (H) | 180 mm 7 in. |
| Reach | At maximum height (D) 615 mm 24 in. At ground level - bucket level (F) 1730 mm 68 in. |
| Bucket angle | Dump angle, degrees (E) 43 degree (angle) Rollback angle, degrees (G) 30 degree (angle) |
| Cycle times | |
Additional information | |
Offers & Discounts
Accessories & Attachments
Hood Guards
Brush guard
The brush guard is designed for operators who require added protection against debris from damaging the expensive-to-replace front grille or lights.
NOTE: Not compatible with front hitch.
Hood guard on 5E Tractor
The basic functions of the hood guard are:
- Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
- Allow for lighting at night
- Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
- Cannot be used with a front hitch
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
Hood guard on 5303 Tractor
The hood guard is highly recommended for 5103, 5203, 5303, 5105, 5205, 5200, 5210, 5220, 5300, 5400, 5400N, 5403, 5310, 5310N, 5320, and 5320N Tractors. The basic function is to:
-
Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
-
Allow for lighting at night
-
Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
-
Cannot be used with a front hitch
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.
Hood guard on 5E Tractor
The basic functions of the hood guard are:
- Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
- Allow for lighting at night
- Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
- Cannot be used with a front hitch
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
Hood guard on 5E Tractor
The basic functions of the hood guard are:
- Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
- Allow for lighting at night
- Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
- Cannot be used with a front hitch
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
Miscellaneous
General Purpose (GP) buckets:
-
The 66-in. GP buckets have replaced the 61-in. materials buckets
-
The 66-in. GP bucket will cover wheel tracks where the 61 in. would not on smaller utility tractors
-
Not compatible with grapples
-
The GP buckets are more durable than materials buckets with full length side cutting edges, additional bottom skid plates, and a double reinforced top section
-
Holes are drilled in the cutting edge allowing easy attaching of a reversible and replaceable cutting edge
General purpose (GP) buckets
-
The GP buckets have replaced the 61-in. and 73-in. materials buckets
-
Recommended for use on 2WD tractors only
-
Compatible with digging teeth and replaceable cutting edge
-
The 66-in. GP bucket will cover wheel tracks where the 61 in. would not
-
Not compatible with grapples
-
The GP buckets are more durable than materials buckets with full-length side cutting edges, additional bottom skid plates, and a double reinforced top section
-
Holes are drilled in the cutting edge allowing easy attaching of a reversible and replaceable cutting edge
Two-function single-lever
Two-function single-lever
Large ballast box is available to carry additional ballast for greater tractor stability.
Capacities |
|||
Weight |
Sand (Dry) |
Concrete |
Portland Cement |
BW15852 Large ballast box: |
|||
| Volume | 13.3 ft3 = 377L |
||
Material |
581 kg (1277 lb) |
871 kg (1915 lb) |
1089 kg (2395 lb) |
Empty box |
155 kg (342 lb) |
155 kg (342 lb) |
155 kg (342 lb) |
Total |
736 kg (1619 lb) |
1026 kg (2257 lb) |
1244 kg (2737 lb) |
BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.
See ''Rear Ballast Requirements'' for proper ballasting of the tractor.
Parking stand
Parking stand coupler
For parking the 512 Loader.
To see instructions on how to park the loader using the stands, go to parking stand section.
Two-function single-lever
Videos
In 1953, Wyatt (JR) Smith bought Smith Tractor Company. Smith originally purchased a Ford tractor dealership until the company took on John Deere products in January of 1987. Since then, Smith Tractor Company has proudly provided John Deere equipment and service throughout Florida & Alabama. Our customer base is built on relationships and in today’s corporate world that is a rare commodity. You will find quite a bit of inventory if you take a trip to one of our locations.
Frisco City, AL
3854 Bowden St.
Frisco City, AL 36445
Phone 251-267-2500
Toll Free 800-221-4052 Option 3
Directions
Atmore, AL
8974 Hwy 31
Atmore, AL 36502
Phone 251-368-1720
Toll Free 800-221-4052 Option 2
Directions
Jay, FL
3834 Highway 4
Jay, FL 32565
Phone 850-675-4505
Toll Free 800-221-4052 Option 1
Directions
© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By