25A
Flail Mower
- Adjustable cutting height
- Uses a heavy-duty gearbox with a rating of 65 hp
- Compatible with any Category 1 3-point hitch
View Product Brochure
Features
Roller
The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.
Heavy-duty gearbox
PTO drive shaft
All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.
The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.
Rotor and knives
A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:
-
Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
- Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
- Knives pivot at their mounting points to minimize damage if an obstruction is hit.
Tractor hookup
The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).
iMatch compatibility starts with serial number 644700.
Specs & Compare
Key Specs | 25A Current Model |
| Cutting width | |
| Cutting height | |
| Blades - Number | |
| Blades - Type | |
| Rotor - Diameter | |
| PTO | |
| Tractor horsepower required - Minimum | |
| Tractor horsepower required - Maximum | |
| Quick-coupler compatible | |
| Weight - Approximate | |
Machine | |
| Cutting width | Centered Centered 1.98 m 78 in. |
| Cutting height | 13 to 127 mm 0.5 to 5 in. |
| Hood thickness | 3.2 mm 0.125 in. |
Blades | |
| Number | 72 (36 pairs) |
| Type | Smooth-cut, cupped-type |
| Tip speed | |
Rotor | |
| Speed | 1,850 rpm |
| Diameter | 114 mm 4.5 in. |
Drives | |
| PTO | 540 rpm |
| Gear case (cont. rating) | |
| Belts | Single HC section |
| Gauge roller | 140 mm 5.5 in. |
Tractor HP Required | |
| Minimum | 22 kW 30 hp |
| Maximum | 56 kW 75 hp |
3-Point Hitch | |
Dimensions | |
| Overall width | 2.53 m 99 in. |
| Overall height | 0.99 m 39 in. |
| Overall length | 1 m 40 in. |
Weight | |
Additional information | |
Offers & Discounts
Videos
In 1953, Wyatt (JR) Smith bought Smith Tractor Company. Smith originally purchased a Ford tractor dealership until the company took on John Deere products in January of 1987. Since then, Smith Tractor Company has proudly provided John Deere equipment and service throughout Florida & Alabama. Our customer base is built on relationships and in today’s corporate world that is a rare commodity. You will find quite a bit of inventory if you take a trip to one of our locations.
Frisco City, AL
3854 Bowden St.
Frisco City, AL 36445
Phone 251-267-2500
Toll Free 800-221-4052 Option 3
Directions
Atmore, AL
8974 Hwy 31
Atmore, AL 36502
Phone 251-368-1720
Toll Free 800-221-4052 Option 2
Directions
Jay, FL
3834 Highway 4
Jay, FL 32565
Phone 850-675-4505
Toll Free 800-221-4052 Option 1
Directions
© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered By