×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

5095M

Utility Tractor


  • PowrReverser™, PowrQuad™ PLUS or Powr8™ transmission options
  • Choose climate-controlled cab or open station
  • Hitch lift capacity starting at 5,150 lb (2,336 kg) and optional up to 7,860 lb (3,565 kg)



View Product Brochure

Features

Adjust to job with flexible wheel spacing
Additional flexibility with bar axle on 5M adds to rear axle offerings Additional flexibility with bar axle on 5M adds to rear axle offerings
Overview

Whether fitting down a row spacing, straddling a windrow, or a wide stance for stability mowing on hills – there is a 5M configuration to meet operator’s needs. The rack-and-pinion (better known as ‘bar’) axle joins the existing flange axle offerings of the 5M adding nearly 25.4 cm (10 in.) of tread width on rear axles and brings additional options such as cast wheels that unlock the compatibility for duals. This increased flexibility all comes in the same versatile 5M tractor.

Benefits
  • 134.874 cm (53.1 in.) to 205.486 cm (80.9 in.) wheel tread range on flange axle configurations
  • Up to 228.6 cm (90 in.) wheel tread range on bar axle configuration
  • Find the fit with fixed flange axle or fine-tune with adjustable bar axle offerings
  • Increased ballast options with cast wheel offerings for bar axles
  • Increase flotation with duals compatible with cast wheels on bar axles

Both the bar and flange axles are proven designs used on tractors for years, but this is the first time that bar axles have been brought to the 5-Series lineup.

Bar axle shown with steel wheelt Bar axle shown with steel wheelt
Flange axle with steel wheel Flange axle with steel wheel

Consult the operator’s manual for specific wheel spacing configurations by tire offering.

Premium cab for the ultimate operating experience
5M Tractor Premium Cab with panorama roof 5M Tractor Premium Cab with panorama roof
Overview

Experience ultimate operator experience in comfort and convenience by upgrading to the Premium Cab on 5M tractors. Upgrading to the Premium Cab unlocks a fixed panorama roof ideal for loader work.

Benefits
  • Improve upward visibility by 80 percent vs standard cab for easier bale stacking, pallet stacking, and dumping loads into walled trailers with the panorama roof
  • Additional storage space with the rear floor mat behind the seat
  • Excellent visibility to rear operations with the rearview mirror
  • Shield the operator from the sun with an easy-to-use front sunshade

Features

Standard Cab

Premium Panorama Roof Cab

Deluxe isolated cab with flat floor

X

X

Tilt and telescopic steering column

X

X

Convenience power outlet

X

X

Air conditioning and heater

X

X

Speedometer

X

X

Beverage Holder

X

X

Sun visor for front window

X

X

Two-speed front windshield wiper and washer

X

X

Two front/two rear roof-mounted worklights

X

X

Two front/two rear roof-mounted warning lights

X

X

Two fender-mounted taillights

X

X

120Amp Alternator

X

X

Convenience power outlet

X

X

Monitor mounting bosses (two Sets)

X

X

Swing-out rear window with two removable rear plugs for monitor

X

X

Right-hand console light

X

X

Radio preparation (with speakers, wiring)

X

X

Rear window grab handle

X

X

Bluetooth® ready

X

X

Requires option code 3025 (Deluxe cornerpost exhaust).

X

X

Fixed panorama roof with shade

-

X

Radio (Bluetooth® and Satellite Capable)

-

X

Rear window wiper

Option

X

Radio antenna

-

X

Requires option code 4030 (ElectroHydraulic (EH) rear hitch)

-

X

Requires option code 6040 (MFWD)

-

X

 

 

Bluetooth is a trademark of Bluetooth SIG, Inc.

Heavy-duty 3-point hitch lift capacity for implement versatility
5M Tractor 3-point hitch 5M Tractor 3-point hitch
Overview

Heavy-duty 3-point hitch provides lift capacity and adjustability for implement versatility with Category 2 implements or adaptable to Category 1. Precisely raise and lower heavy implements such as planters, sprayers, and field cultivators, using the rockshaft control lever. The operator can also adjust the speed at which an implement is lowered by adjusting the rockshaft rate of drop.

Benefits
  • Convenience hooking up implements with telescoping draft links, adjustable sway bars, and interchangeable hitch balls with the choice of either mechanical or electrohydraulic controls. 
  • Consistency when lowering hitch with depth stop on both mechanical and electrohydraulic hitch controls - each time the position control lever is pushed forward, it stops where the depth stop has been positioned. Useful when preparing a seedbed. 
  • Compatible with implements needed to perform multiple jobs. Increased lift capacity is available with optional larger cylinders. See Specifications for lift capacity by model. 
  • Convenience when leveling implements with right lift link being able to adjust without tools - lift links can be adjusted for lateral float to allow implements with gauge wheels or skids to follow the ground contour 
Additional details

Mechanical or electrohydraulic hitch control operation 

Raise and lower rear implements with precision with either the mechanical or electrohydraulic (EH) hitch control. The operator can also adjust the speed at which an implement is lowered by adjusting the rockshaft rate of drop. 
 

The mechanical hitch control is paired with the tractors equipped with a PowrReverser™ transmission while the EH hitch control is paired with units equipped with a PowrQuad™ PLUS or Powr8™ transmission. Both control types enable the operator to adjust the speed at which an implement can be lowered by adjusting the rockshaft rate of drop. In addition to this feature, the EH hitch control adds repeatable movements by enabling the operator to set both an upper and lower limit.


 
The adjustable depth stop (found on both control types) provides consistency when lowering the hitch. Each time the position control lever is pushed forward, it stops where the depth stop has been positioned. This feature is a value to anyone who desires a consistent, level ground, like when preparing a seedbed. 
 
The center link can be set in one of three positions to accurately set the implement position and draft sensing. The right lift link is adjustable without tools for added convenience when leveling implements. 

Optional larger cylinders:

Transmission 

Cylinder diameter 

Lift capacity at 610-mm (24-in) behind lift point 

PowrReverser™ transmission models 

Two 65-mm (2.56-in.) cylinders 

 

 

 

See specifications for lift capacity. 

PowrReverser models with optional high-capacity hitch 

One 65-mm (2.56-in.) cylinder 
One 75-mm (2.95-in.) cylinder 

PowrQuad PLUS or Powr8 transmission models

Two 75-mm (2.95-in.) cylinders 

PowrQuad PLUS or Powr8 models with optional high-capacity hitch

Two 80-mm (3.15-in.) cylinders 

Rear fender hitch controls
5M rear fender hitch controls 5M rear fender hitch controls

Operators do not need to carry a tool to adjust the rear hitch. Operators can also raise and lower the 3-point hitch from outside of the tractor with the conveniently located rear fender hitch controls.

Rear quick hitch
Rear quick hitch Rear quick hitch
Sideview of quick hitch shown on 5M Sideview of quick hitch shown on 5M

An updated three-point quick hitch is offered on the 5M Tractors.

  • This updated design is a break from the existing welded quick hitch as the frame is cast.
  • The curved design eliminates the potential for contact with the rear fender and extensions.
  • The quick hitch is available as a field kit option.
Sway bars
5M Tractor sway bars 5M Tractor sway bars

Adjustable sway bars and telescoping draft links can be easily adjusted to adapt to a wide variety of implements. The right lift link also adjusts without tools for added convenience when leveling implements. 

Focus on the job while AutoTrac™ guidance keeps on track
Mowing with AutoTrac™ Mowing with AutoTrac™

Manage in-field efficiency and reduce operator fatigue by engaging AutoTrac on your 5M tractor. AutoTrac provides operators with a hands-free guidance solution with accuracy on a variety of field conditions.

 

Enable the following benefits by equipping your 5M Tractors with AutoTrac Ready, a 4240 Universal Display and a StarFire™ receiver:

  • Simple and user friendly
  • Reduces operator fatigue and error
  • Saves time by eliminating implement overlap
  • Optimizes machine efficiency
  • Increase data driven decisions by documenting jobs

 

Potential jobs to use with AutoTrac:

  • Cutting hay
  • Over seeding
  • Cultivation
  • Disking
  • Spraying
  • Mowing
  • Planting
  • Fertilizer applications
  • Pulling in irrigation pipe
  • Cutting ditches
  • Transplanting
  • Harvesting

 

Learn more about the benefits of 4240 universal display.

Learn more about the benefits of a Starfire 6000 receiver.

 

Take charge with PowrQuad™ PLUS and Powr8™ transmissions
Integrated declutch and gear buttons on single transmission control lever Integrated declutch and gear buttons on single transmission control lever
Overview

A more productive transmission in a mid-spec utility tractor is found with PowrQuad PLUS and Powr8 transmissions which builds on the clutchless hydraulic shifting between forward and reverse of the PowrReverser™ transmissions with simple push-button gear shifting.

Benefits
  • Ergonomically placed transmission control lever allows the operator to change gears and ranges using one lever
  • Improved efficiencies by reducing steps to change gears by 35 percent
  • Effortlessly switch directions with a small finger motion using the electrohydraulic fingertip directional lever
  • Ideal for loader work and any applications that require frequent directional changes in tight spaces
  • Eliminates wear on the clutch by automating gear shifts at the push of a button
Additional details

The PowrQuad™ transmission can be ordered with three different options to meet producer needs: PowrQuad™ PLUS 16F/16R, Powr8™ 32F/16R or the Powr8™ 32F/16R with creeper found on standard 5Ms.

 

PowrQuad/Powr8 transmissions include:

  • Wet clutch
  • Ergonomically mounted transmission lever controlling both gear and range changes
  • Declutch button on the range lever for range shifting optionally without use of foot clutch
  • Left-hand reverser for seamless directional changes
  • Constant-mesh, helical-cut gears
  • Pressure-lubricated top shaft
  • Positive park pawl
  • Three-speed PTO
  • Neutral start switch
Integrated declutch and gear buttons on transmission control lever Integrated declutch and gear buttons on transmission control lever

Ranges on the transmission control can be selected by moving the controller in an H pattern. The lever selects ranges A, B, C, or D. Ranges are fully synchronized. That means when upshifting, operators can move between any range A-D without stopping the tractor.

 

Two buttons allow operators to gear up (rabbit) or gear down (turtle) within a range. A PowrQuad has 4 gear speeds per range while a Powr8 has 8 per forward range which is precisely how they got their names.

Increase speed control with PowrReverser™ Hi-Lo 32F/16R transmission
Hi-Lo selector on gear lever Hi-Lo selector on gear lever
Overview

For operators requiring more field speeds to achieve the most precise operating ranges, as well as for quickly moving from task to task with transport speeds of up to 40.23 km/h (25 mph), the PowrReverser™ Hi-Lo 32F/16R transmission is the ideal choice. This transmission provides 32F/16R speeds for the ultimate in speed selection.

Benefits
  • Effortlessly switch directions with a small finger motion using the electrohydraulic fingertip directional lever
    • Frees the right hand to operate other tractor controls, such as the loader, rear implements, or throttle, as the directional lever allows the operator to steer and shift direction with the left hand
    • The control is located on the left side of the instrument console and selects forward, reverse, and neutral positions
  • Clutch-less hydraulic shifting between forward and reverse
  • Convenient push-button controls actuate the electrohydraulic hi-lo selector providing an extra 20% increase/decrease in speed for each forward gear
  • Lower engine vibration, reduced noise, less wear and tear on the engine, reduced fuel consumption, and increased operator comfort from the standard economy PTO (E-PTO)
Additional details

32F/16R transmission includes: 

  • Hydraulic wet clutches (forward and reverse)
    • Maximize durability and outlast the life of any dry clutch
    • When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs
  • Platform-mounted shift levers (four gears, four ranges)
    • Two platform-mounted levers offer easy and comfortable shifting for a pleasant operator experience
    • The gear-shift lever is easy to reach, and the less-used range lever is shorter. Unique knobs make it easy to distinguish between the two
  • Left-hand reverser
  • Constant-mesh helical-cut gears
    • Provide quieter operation and excellent reliability while the pressure-lubricated top shaft adds to the transmission durability
    • Fully enclosed, rigid shift linkages for short throw and crisp shifts enable all operators to clearly know in what range and gear they are operating
  • Pressure-lubricated top shaft
  • Positive park pawl: provides positive park and eliminates the need for a hand brake
  • Neutral start switch

 

The gear lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. This same lever is where the hi-lo control buttons are located which provide a single shift up/down in speed within each forward range. The rear lever selects ranges A, B, C, or D. All ranges are fully synchronized which means, when shifting, operators can move between any range A-D without stopping the tractor.

 

The hi-lo feature benefits operators who frequently transport their tractors from field to field or find themselves in bog-down situations during rear power take-off (PTO) work such as baling in variable sized windrows. Customers can push the rabbit button (high) without having to depress the clutch to get a 20 percent increase in speed. They can also push the turtle button (low) to get a 20 percent decrease in speed, similar to downshifting or engine braking without having to grab another gear.

Shuttle control knob Shuttle control knob

The 32F/16R transmission includes the infinitely variable shuttle control feature allowing fine-tuning of the speed of directional changes to the operator's preference or application demands. This dial adjusts the aggressiveness of the tractor’s directional change. Some prefer a quicker more precise change, whereas other operators are more comfortable with a slow roll out before moving in the opposite direction. This feature can be significant for precision work with pallet forks or changing to bale stacking applications.

 

The PowrReverser™ has a built-in engagement override valve for additional safety. This valve requires the clutch pedal to be depressed one time after each engine start before the transmission will begin to operate normally, giving the operator another opportunity to put all focus on the tractor.

 

NOTE: A neutral start switch requires the directional lever be in the neutral position to start the engine. NOTE: See PTO detailed feature for more information on E-PTO.

 

PowrReverser™ 16F/16R transmission
Overview

Ample speeds and ease of operation for demanding applications with the 16F/16R PowrReverser, providing 16 forward speeds and 16 reverse speeds. This transmission comes standard with a dual speed 540/540 Economy power take-off (PTO), and it is ideal for applications requiring frequent directional changes, such as loader work.

Benefits
  • Effortlessly switch directions with a small finger motion using the electrohydraulic fingertip directional lever
    • Frees the right hand to operate other tractor controls, such as the loader, rear implements, or throttle, as the directional lever allows the operator to steer and shift direction with the left hand
  • Ideal for rear blading and any applications that require frequent directional changes in tight spaces
  • Clutch-less hydraulic shifting between forward and reverse
  • Lower engine vibration, reduced noise, less wear and tear on the engine, reduced fuel consumption, and increased operator comfort from the standard economy PTO (E-PTO)
Additional details

16F/16R transmission includes: 

  • Hydraulic wet clutches (forward and reverse)
    • Maximize durability and outlast the life of any dry clutch
    • When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs
  • Platform-mounted shift levers (four ranges, four gears)
    • Two platform-mounted levers offer easy and comfortable shifting for a pleasant operator experience
    • The gear-shift lever is easy to reach, and the less-used range lever is shorter. Unique knobs make it easy to distinguish between the two
  • Left-hand reverser
    • The control is located on the left side of the steering column and selects forward, reverse, and neutral positions
  • Constant-mesh helical-cut gears
    • Provide quieter operation and excellent reliability while the pressure-lubricated top shaft adds to the transmission durability
    • Fully enclosed, rigid shift linkages for short throw and crisp shifts enable all operators to clearly know in what range and gear they are operating
  • Pressure-lubricated top shaft
  • Positive park pawl: provides positive park and eliminates the need for a hand brake
  • Neutral start switch
Gear and range shift levers (cab)t Gear and range shift levers (cab)t
Gear shift lever open operator’s station (OOS) Gear shift lever open operator’s station (OOS)
Range shift lever (OOS) Range shift lever (OOS)

The forward lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. The rear lever selects ranges A, B, C, or D. All ranges are fully synchronized. When upshifting, operators can move between ranges without stopping the tractor providing convenience for on-the-go shifting from field to transport.

Left-hand reverser lever Left-hand reverser lever

NOTE: A neutral start switch requires the directional lever be in the neutral position to start the engine. 

Integrated declutch button on gear shifter Integrated declutch button on gear shifter

NOTE: The PowrReverser transmission is not available for the 5130M or 5130ML tractors.

 

The PowrReverser has a built-in engagement override valve for additional safety. This valve requires the clutch pedal to be depressed one time after each engine start before the transmission will begin to operate normally, giving the operator another opportunity to put all focus on the tractor. 
 
See the PTO functional area for more information on E-PTO. 

Creeper lever on 5MH only Creeper lever on 5MH only

The creeper gears are accessible by engaging the creeper lever into rabbit or turtle position. This provides 2 additional slow working ranges perfect for bedded crops.

 

See the PTO functional area for more information on E-PTO.

Power bulge and torque reserve pull through the tough spots
Power bulge and torque curve Power bulge and torque curve
Overview

When the tractor is under load, power bulge and torque rise work together to get through the tough spots without having to downshift.

 

As rpm drops, the only way to maintain or increase horsepower is to provide additional torque. Whether bailing wet hay or lifting a heavy load, the additional power allows the tractor to continue performing the job without stopping. The rated economy power take-off (EPTO) speed occurs near the peak torque rise providing power when operator need it in PTO applications.

Benefits
  • Increased productivity in demanding conditions with more power when operator need it
  • More lugging ability for quicker power recovery
  • Additional torque provides force to remain horsepower as engine rpm drops below rated speed
Additional Details

Horsepower and torque are mathematically related.

#

5M 4-Cylinder tractors provide 4% power bulge while 5E 4-Cylinder tractors provide 2% power bulge. Note: There is no power bulge on 3-Cylinder tractors (5E 3-Cylinder or 5075M).

 

5E 4-Cylinder Power and Torque Curves

5E power curve summary 5E power curve summary
5E torque curve summary 5E torque curve summary
5M Power and Torque Curves
5M power curve summary 5M power curve summary
5M torque curve summary 5M torque curve summary
Automotive-style light-emitting diode (LED) instrument cluster
Instrument cluster Instrument cluster
Power take-off (PTO) target bars Power take-off (PTO) target bars
Overview

Operators can view information in a crisp, vibrant, and useful array on the tractor instrument cluster.

Benefits
  • Clear and bright indicators, warning lights, and gauges
  • Provides operators with crucial onboard diagnostics through the roll-mode function
  • Visibility of engine hours, ground speed, Hi-Lo indicator, forward, neutral, and reverse all at the same time
  • Light-out indicator for trailer light, turn light, and hazard light bulbs
  • Clearly presented PTO target bars to indicate the correct PTO speeds when operating the PTO
Additional details

There are daytime and nighttime modes which are based on the position of the light switch. The mode adjusts the backlight levels of the display for optimum visibility.

Heavy base tractor weight for stability
Tractor weight package Tractor weight package
Overview

Keep implements in the ground with more down force that comes from a heavy tractor. The compactness of the 5M Series regarding wheelbase, weight, and total height tractor makes this tractor suited for a variety of different applications and is the perfect choice for all types of farms. 

Benefits
  • Improved traction and performance in the field 
  • Ability to power through tough jobs with heavy and durable cast steel 
  • Better stability when performing loader work 
  • Transport full bucket loads faster and lift bales higher with a stronger and more stable base 
Additional details

See specifications for machine weight.

EPA Final Tier 4 (FT4) compliant engines with maximum fluid efficiency
PowerTech™ PWL FT4 technology PowerTech™ PWL FT4 technology
Overview

All John Deere engines are designed and engineered specifically for agricultural applications. The engine powering 5 Series tractors is EPA certified Tier Level 4. 

Benefits
  • Efficient and cost-effective operation 
  • Allows for greater productivity and ease of operation 
  • Responsive power reducing the need to downshift the transmission 
Additional details

The U.S. EPA and Environment Canada requires all off-road diesel engines with 18.6 kW (25 hp) or more to meet stringent FT4 emissions regulations.  

 

PowerTech EWL/EWR/EWX/PWL/PWS/PSS/PVS engine identification

NOTE: find a tractor’s 3 character engine identification by referencing the ‘engine description’ in specifications.

 

 EWL

 

Aftertreatment 

  • X – DOC and DPF
  • S - Exhaust filter and SCR
  • R – DOC and EGR
  • L - DOC and SCR

Turbocharger 

  • V - Variable geometry turbocharger (VGT) 
  • S - Series turbochargers 
  • W - Wastegate turbocharger 

Technology 

  • P - PowerTech Plus 
  • E - PowerTech E 

 

Several defining features on 5 Series tractors maximize the performance and reliability of the emissions package. A completely shielded DOC/DPF/SCR not only protects essential components from damage, it also keeps out dirt and debris. The well-packaged and tightly organized circulation system means there is more room to work around the tractor.

Key components of the emissions system
Shielded for protection Shielded for protection

Diesel oxidation catalyst (DOC), diesel particulate filter (DPF), and cooled exhaust gas recirculation (EGR)

Deere has chosen to utilize an exhaust filter (DOC) and/or diesel particulate filter (DPF) to reduce particulate material so the engine can operate at a level which produces less nitrogen oxide (NOx). With less NOx created, it requires less DEF to treat or no DEF for 3-cylinder models. The result is improved total fluid economy (diesel and DEF). Some applications also reduce NOx using cooled exhaust gas recirculation (EGR) that allows a controlled amount of exhaust gas to be returned to the engine leading to lower combustion temperature for a cleaner, more efficient exhaust.

 
The engine is programmed to aggressively respond to changes in power needs, which can temporarily increase particulate matter. Since the exhaust filter removes particulate matter instead of the engine, the engine is left free to do what it is designed to do – deliver all of the power, torque, plus transient response needed at the exact moment needed. 

 

Diesel exhaust fluid (DEF)

DEF is an ISO 22241 standard aqueous urea solution consisting of 32.5 percent urea and has a freezing point of -11° C (12° F). A DEF tank keeps the operator in the field longer even when the temperatures drop below freezing. The DEF tank header is integrated with a temperature sensor and plumbed engine coolant lines are used to promote thawing and prevent freezing in the tank during operation. 

DEF tank DEF tank

Mounted near the DEF tank, the engine control unit (ECU)-controlled supply module draws DEF from the storage tank and provides a pressurized flow to the dosing module. When the ignition key is off, the supply module pump will reverse direction to return any accumulated fluid back to the tank. The supply module is also fitted with a replaceable filter to prevent contaminants from entering the dosing lines. Both the supply module and dosing lines are electrically heated and controlled by the ECU to determine when diesel exhaust fluid dosing can begin.

 

Selective catalytic reduction (SCR)

SCR is the final step in the process of reducing engine exhaust emissions to meet FT4 regulations. This process allows for the flow of engine exhaust dosed with DEF to pass from the SCR, reducing the presence of NOx converting it from NH3 to N2 (nitrogen gas) and H20 (water). The SCR canister is a welded, stainless assembly which requires no service. It also serves as a thermal insulator and provides additional noise reduction.

 

For more information regarding EPA regulations and the technology behind John Deere Integrated Emissions Control systems, please visit the following link: http://www.deere.com/wps/dcom/en_US/campaigns/ag_turf/emissions/final_tier_4.page or https://www.deere.ca/en/engines-and-drivetrain/final-tier-4/

Specs & Compare

ADD MODEL

Key Specs

5095M
Current Model
Engine descriptionJohn Deere PowerTech™ 4045 EWL
Engine displacement4 cylinder: 4.5 L
276 cu in.
Rated engine powerAt 2200 rpm per ISO 97/68/EC: 70.0 kW
93.9 hp
Maximum engine power73 kW
97.8 hp
Rated PTO power (hp SAE)At 2100 rpm per SAE: 58.8 kW
80 PTO hp
Maximum PTO power
Transmission typeStandard: PowrReverser™ 16F/16R
Optional: PowrReverser™ Hi-Lo 32F/16R
PowrQuad™ PLUS 16F/16R
Powr8™ 32F/16R
Powr8™ 32F/16R with creeper
Hydraulic pump rated outputPowrReverser™: 94 L/min
24.7 gpm
PowrQuad™ PLUS/Powr8™: 97 L/min
25.6 gpm
Rear hitch category (SAE designation)Category 2; convertible to 1
Base machine weightPowrReverser™: 3764 kg (8,298 lb)
PowrQuad™ PLUS/Powr8™: 3964 kg (8,740 lb)
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)

Engine specifications

DescriptionJohn Deere PowerTech™ 4045 EWL
Engine type4045HLV82
Engine family
Rated speed2200 rpm
AspirationTurbocharged/air-to-air aftercooled
Cylinders linersWet sleeved
Emission levelFinal Tier 4
After treatment typeDOC/SCR
Displacement4 cylinder: 4.5 L
276 cu in.

Engine performance

Rated powerAt 2200 rpm per ISO 97/68/EC: 70.0 kW
93.9 hp
Rated PTO power (hp SAE)At 2100 rpm per SAE: 58.8 kW
80 PTO hp
Maximum PTO power
Intelligent Power Management (IPM)
Power boostAt 1900 rpm: 4 percent
Maximum engine power73 kW
97.8 hp
Engine peak torqueAt 1600 rpm: 396 Nm
292 lb-ft
Drawbar power
PTO torque riseAt 1600 rpm: 30 percent
Fuel injection system and control
Air cleaner type
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)

Transmission

TypeStandard: PowrReverser™ 16F/16R
Optional: PowrReverser™ Hi-Lo 32F/16R
PowrQuad™ PLUS 16F/16R
Powr8™ 32F/16R
Powr8™ 32F/16R with creeper
ReverserLeft hand, electrohydraulic
Clutch; wet/dryWet
CreeperPowr8™ 32F/16R with creeper

Hydraulic system

TypeOpen center
Pump rated outputPowrReverser™: 94 L/min
24.7 gpm
PowrQuad™ PLUS/Powr8™: 97 L/min
19.3 gpm
Available flow at a single rear SCV70 L/min
18.4 gpm
Available flow at front SCVs
Number of rear selective control valves (SCVs)Two, up to three total
Number of mid selective control valves (SCVs)Two, up to three total
Number of front selective control valves (SCVs)
Joystick SCV controlOptional
Auxiliary hydraulic features
SCV controlMechanical

Rear hitch

Hitch draft control load sense typeMechanical or Electrohydraulic
Remote control valves availableStandard: Two
Optional: Three
Hitch category (SAE designation)Category 2; convertible to 1
Maximum lift capacity behind lift pointsStandard for PowrReverser™: 2336 kg
5150 lb
Optional for PowrReverser™: 2699 kg
5950 lb
Standard for PowrQuad™ PLUS/Powr8™: 3161 kg
6970 lb
Optional for PowrQuad™ PLUS/Powr8™: 3565 kg
7860 lb
Lift capacity at standard frame
Sensing typeLower link
Rear axle differential lockElectrohydraulic

Drawbar

Drawbar categoryCategory 2
Maximum vertical loadRoad/field use (250-mm extended): 1450 kg
3197 lb
Field use (350-mm extended): 1200 kg
2646 lb
Field use (400-mm extended): 1200 kg
2646 lb

Rear power take-off (PTO)

TypeIndependent, 34.9 mm (1.375 in)
Standard: 540/540 Economy (6 spline)
Optional: 540/540E (6 spline) and 1000 rpm (21 spline) reversible shaft
Engine rpm (at rated PTO speeds)540 at 2100 rpm
540E at 1645 rpm
1000 at 2100 rpm
Economy PTO speeds
Reverse PTO speeds
Multispeed PTO option availability
Ground speed PTO option availability
PTO actuationElectrohydraulic

Front hitch

CategoryCategory 2
Electric power
Standard lift capacity1931 kg
4257 lb
Front power take-off (PTO)1000 rpm
(21 spline) 34.9 mm (1.375 in.)
PTO speed1000 at 2200 rpm

Rear axle

TypeStandard: Flange
Optional: Rack-and-pinion (Bar)
Final drive typeInboard planetary
Differential controlsElectrohydraulic
Axle type
Brakes, type and controlHydraulic wet disc
Rear differential lock
Load rating

Front axle

Type
Front axle differential lock
Load rating

Tires

Rear2WD: 18.4R30 (460/85R30) R1W Radial
MFWD: 18.4R30 (460/85R30) R1W Radial
Wheel tread range2WD: front: 1520-2020 mm
59.8-79.5 in.
MFWD: front: 1299-1997 mm
51.1-78.6 in.
rear: 1350-2286 mm
53.1-90 in.
Turning radius with brakes2WD: 3.67 m
12.04 ft
MFWD: 3.85 m
12.6 ft
Turning radius without brakes2WD: 3.85 m
12.6 ft
MFWD: 4.0 m
13.1 ft
Central Tire Inflation System (CTIS)
Front

Tracks

Tread spacing
Drive type
Track width
Mid-rollers

Steering

Brakes

Primary brake (foot brake)
Secondary brake
Park lock
MFWD braking
Front axle brakes
Auxiliary brakes
Hydraulic trailer brakes
Pneumatic trailer brakes

Electrical system

Alternator sizeOOS: 90 amp
Cab: 120 amp
ISOBUS/GreenStar™ Ready: 200 amp
Battery options12 V
Working lightsStandard: Halogen
Optional: LED
Type of bulb in headlight (Halogen, Zenon, LED)Standard: Halogen
Optional: LED
Type of bulb in beacon (Halogen, Zenon, LED)Optional: LED
dB(A) rating for backup alarm
Total cold cranking amps

Operator station

Rollover protective structure, OOSRigid - foldable - telescopic
Foldable, two-post
Platform - flat/straddle
Flat
Gearshift location - console/floor
Floor
SeatStandard: Mechanical suspension
Optional: air ride or premium air ride
Cab suspension
Instructional seatOptional
DisplayPowrReverser™: Automotive-style light-emitting diode (LED) instrument cluster
PowrQuad™ PLUS/Powr8™: Digital Dash Display with three liquid crystal displays (LCDs)
RadioOptional
Inner cab volume
dB(A) rating78 dBA
Cab glass area
Safety glass rating
Front visibility

Dimensions

Wheelbase2WD and MFWD: 2350 mm
92.5 in.
Overall width
Overall length
Overall height
Drawbar clearance
Front axle center
Approximate shipping weight, Open;Cab2WD: Open: 3700 kg
8140 lb
Cab: 3900 kg
8580 lb
MFWD: Open: 3975 kg
8765 lb
Cab: 4175 kg
9185 lb

Weight

Base machine weightPowrReverser™: 3764 kg (8,298 lb)
PowrQuad™ PLUS/Powr8™: 3964 kg (8,740 lb)
Maximum ballast level
Maximum permissible weight

Capacities

Crankcase oil volume
Fuel tankStandard: Open: 142.7 L
37.7 U.S. gal.
Cab: 165.4 L
43.7 U.S. gal.
Diesel exhaust fluid (DEF) tank12 L
3.17 U.S. gal.
Cooling system
Transmission-hydraulic system

Serviceability

Interval for engine oil change
Interval for hydraulic/transmission oil change
Interval for engine coolant change

Loaders

Loader
Lift capacity at full height
Maximum lift height
Leveling type

Precision AG

GuidanceOptional: AutoTrac™ Ready
Telematic
Remote diagnostics

Miscellaneous

AutoTrac readyOptional with PowrQuad™ PLUS/Powr8™ models
ISOBUS readyOptional with PowrQuad™ PLUS/Powr8™ models
CommandCenter video inputs
Immobilizer
Side slope rating
Uphill/downhill slope rating
Country of manufacturePune, India

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Ag Management Solutions

AutoTrac™ Universal Steering Supplemental Kit - "AA - 252FLVBPF12133
FT4 GreenStar Harness - 252FLVBPF11129
Gen 4 and GreenStar™ Displays Bracket for Single Display - Tractor and Sprayer - 252FLVBPF12124

Cab Operator's Station

Ash Tray - 252FLVAH104259
Ashtray Ashtray
Cigarette lighter Cigarette lighter
Cigarette Lighter - 252FLVAR60937
Ashtray Ashtray
Cigarette lighter Cigarette lighter
Leather Steering Wheel - 252FLVRE282643
Leather-wrapped steering wheel shown Leather-wrapped steering wheel shown
Overview

Add a little comfort to the day with the leather-wrapped steering wheel.

Power Strip with Six Outlets - 252FLVRE68495
Power strip and accessories
Power strip kit Power strip kit
Power strip installed Power strip installed

The power strip provides six additional electrical outlets that give either permanent or ignition-key-controlled power for such items as:

  • Computers
  • Portable telephone chargers
  • Implement monitor
  • Implement supply
  • 12-V and up to 30-amp total current can be taken from these outlets

 

The power strip is not a surge suppressor. Electrical equipment with program memory or capacity for data storage requires protection from the damage of electrical surges and spikes that could occur in systems without transient voltage protection.

Rear Wiper Kit - 252FLVSJ16226
SJ16226 Rear Wiper Kit shown SJ16226 Rear Wiper Kit shown
RE244873 Rear Wiper Kit shown RE244873 Rear Wiper Kit shown
LG102380 Rear Wiper and Washer Kit shown LG102380 Rear Wiper and Washer Kit shown
LV100113 Rear Wiper and Washer kit shown LV100113 Rear Wiper and Washer kit shown
Overview

The rear wiper kit provides better rear visibility during inclement weather. It includes a wiper and a wiper nozzle that disperses fluid to clean the window.

Seat Backrest Extension - 252FLVAT162291

A backrest extension improves operator comfort in cab and isolated open operator station tractors.

Security Door Lock Kit - 252FLVAL71345
Custom key door locks
Custom key door lock kit Custom key door lock kit

Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.

Drawbar

Drawbar - Hammerstrap and Chain Clevis Kit - 252FLVRE242110
RE242110 Hammer Strap and Chain Clevis Kit shown RE242110 Hammer Strap and Chain Clevis Kit shown
#
RE275866 Heavy-Duty Drawbar Kit shown 	RE275866 Heavy-Duty Drawbar Kit shown
BSJ10503 Air Trailer Brake Kit shown BSJ10503 Air Trailer Brake Kit shown
RE39829 Drawbar Clevis Kit shown RE39829 Drawbar Clevis Kit shown
RE39830 Drawbar Clevis Kit shown RE39830 Drawbar Clevis Kit shown
R196191 Drawbar shown 	R196191 Drawbar shown
R133359 Drawbar shown	R133359 Drawbar shown
R197239 Drawbar shown R197239 Drawbar shown
#
Overview

Drawbars, Hammer strap and chain clevis kits allow for operators to change the positioning of the drawbar based on operation being completed.

 

NOTE: Refer to owner’s manual for drawbar and PTO specifications

Drawbar - Offset - 252FLVR133359
Straight drawbar clevis kit Straight drawbar clevis kit
RE39830 offset drawbar clevis kit RE39830 offset drawbar clevis kit
R133359 offset drawbar – standard duty R133359 offset drawbar – standard duty
R197239 offset drawbar – heavy duty R197239 offset drawbar – heavy duty
Overview

The RE39830 offset drawbar clevis kit is to be used in conjunction with either the R133359 standard-duty offset drawbar or R197239 heavy-duty offset drawbar to provide a 63.5-mm (2.5-in.) drop over a straight drawbar.

 

Please contact a dealer or refer to the operator’s manual for compatibility and determination of vertical load capacities specific to the standard and heavy-duty drawbars.

Drawbar Clevis Kit (Hammer Strap) - Offset Drawbar - 252FLVRE39830
Straight drawbar clevis kit Straight drawbar clevis kit
RE39830 offset drawbar clevis kit RE39830 offset drawbar clevis kit
R133359 offset drawbar – standard duty R133359 offset drawbar – standard duty
R197239 offset drawbar – heavy duty R197239 offset drawbar – heavy duty
Overview

The RE39830 offset drawbar clevis kit is to be used in conjunction with either the R133359 standard-duty offset drawbar or R197239 heavy-duty offset drawbar to provide a 63.5-mm (2.5-in.) drop over a straight drawbar.

 

Please contact a dealer or refer to the operator’s manual for compatibility and determination of vertical load capacities specific to the standard and heavy-duty drawbars.

Heavy-Duty Drop Drawbar - 252FLVR197239
Straight drawbar clevis kit Straight drawbar clevis kit
RE39830 offset drawbar clevis kit RE39830 offset drawbar clevis kit
R133359 offset drawbar – standard duty R133359 offset drawbar – standard duty
R197239 offset drawbar – heavy duty R197239 offset drawbar – heavy duty
Overview

The RE39830 offset drawbar clevis kit is to be used in conjunction with either the R133359 standard-duty offset drawbar or R197239 heavy-duty offset drawbar to provide a 63.5-mm (2.5-in.) drop over a straight drawbar.

 

Please contact a dealer or refer to the operator’s manual for compatibility and determination of vertical load capacities specific to the standard and heavy-duty drawbars.

Safety Chain Support Kit - 252FLVRE19428
Safety chain support Safety chain support
  • Provides necessary tractor parts to accept implement safety chains
  • Attaches to tractor drawbar ahead of hitch pin
  • Order safety chain from implement section

Front Fenders

Front Fenders 370 mm (14.6 In.) Wide (MFWD) - 252FLVAL180330
Front fenders installed on a 5M Tractor Front fenders installed on a 5M Tractor

Mechanical front-wheel drive (MFWD) front fenders protect operators and the 4WD tractor from debris thrown by the front tires, especially when going from severe conditions to transport speeds.

 

The fenders are not compatible with loaders. LVB25776 mounting bracket and hardware kit must be ordered separately.

Front Fenders 420 mm (16.5 In.) Wide (MFWD) - 252FLVAL180327
Front fenders installed on a 5M Tractor Front fenders installed on a 5M Tractor

Mechanical front-wheel drive (MFWD) front fenders protect operators and the 4WD tractor from debris thrown by the front tires, especially when going from severe conditions to transport speeds.

 

The fenders are not compatible with loaders. LVB25776 mounting bracket and hardware kit must be ordered separately.

Front Fenders 480 mm (18.9 In) Wide (MFWD) - 252FLVAL180326
Turnable Front Fender Mounting brackets and hardware kit - 252FLVBSJ10307

Front Weights

Front Weight Support, 110 kg (242 lb) (20 front weights) - 252FLVSU58373
SU58373 front weight support for 20 suitcase weights SU58373 front weight support for 20 suitcase weights
Overview

SU58373 is a cast-iron front weight support that allows for up to 20 suitcase weights to be added to the front of the tractor for proper ballasting.

 

The front weight support weighs 110 kg (242 lb) and has a 20-weight carrying capacity. Each front suitcase weight weighs approximately 43 kg (95 lb).

Additional details

If using with BW16765 hood guard, only 18 weights will fit. If using with BXX10036 hood guard, 20 weights will fit.

SU58373 front weight support for 20 suitcase weights SU58373 front weight support for 20 suitcase weights
Front Weight Support, 55kg (121 lb) - 252FLVR262449
R262449 front weight support for 10 suitcase weights R262449 front weight support for 10 suitcase weights
Overview

R262449 is a cast-iron front weight support that allows for up to 10 suitcase weights to be added to the front of the tractor for proper ballasting. The weight bracket weighs approximately 55 kg (121 lb), and Quik-Tatch™ weights can be easily added for additional ballast. Each front suitcase weight weighs approximately 43 kg (95 lb).

 

See the ballasting and optimizing performance section or the tractor operator's manual for additional ballasting information.

Additional details

NOTE: The front weight bracket is compatible with the hood and brush guards also installed.

R262449 front weight support for 10 suitcase weights R262449 front weight support for 10 suitcase weights
Weight, front suitcase 43 kg (95 lb) quantity of one - 252FLVR127764
Front suitcase weight Front suitcase weight

One suitcase weight of 43 kg (95 lb).

Fuel Tank

Inner Fuel Tank Sheild - 252FLVBSJ10592
Fuel tank shield kit (BSJ10485) with fuel tank skid plate kit (BSJ10592) and cab mid fuel tank kit (BSJ10593) shown Fuel tank shield kit (BSJ10485) with fuel tank skid plate kit (BSJ10592) and cab mid fuel tank kit (BSJ10593) shown
SJ13455 Fuel tank with SJ14118 skid plate kit shown SJ13455 Fuel tank with SJ14118 skid plate kit shown
BSJ10104 Mid fuel tank and BSJ10102 skid plate kit shown BSJ10104 Mid fuel tank and BSJ10102 skid plate kit shown
BSJ10103 Fuel tank shield kit shown BSJ10103 Fuel tank shield kit shown
BSJ10444 Fuel tank shown BSJ10444 Fuel tank shown
BSJ10477 Fuel tank shield kit shown BSJ10477 Fuel tank shield kit shown
BSJ10480 Fuel tank shield kit shown BSJ10480 Fuel tank shield kit shown
RE267625 Mid fuel tank shown RE267625 Mid fuel tank shown
RE267623 Fuel tank shown RE267623 Fuel tank shown
Overview

Stay in the field longer with the mid fuel tank kit (BSJ10593). This fuel tank adds an additional 160.5 L (42.4 U.S. gal.) of fuel capacity.

Protect the fuel tanks from punctures by installing fuel tank shield kits.

Lockable Filler Cap Fuel Tank - 252FLVAL213203
Mid Fuel Tank - 252FLVBSJ10593
Fuel tank shield kit (BSJ10485) with fuel tank skid plate kit (BSJ10592) and cab mid fuel tank kit (BSJ10593) shown Fuel tank shield kit (BSJ10485) with fuel tank skid plate kit (BSJ10592) and cab mid fuel tank kit (BSJ10593) shown
SJ13455 Fuel tank with SJ14118 skid plate kit shown SJ13455 Fuel tank with SJ14118 skid plate kit shown
BSJ10104 Mid fuel tank and BSJ10102 skid plate kit shown BSJ10104 Mid fuel tank and BSJ10102 skid plate kit shown
BSJ10103 Fuel tank shield kit shown BSJ10103 Fuel tank shield kit shown
BSJ10444 Fuel tank shown BSJ10444 Fuel tank shown
BSJ10477 Fuel tank shield kit shown BSJ10477 Fuel tank shield kit shown
BSJ10480 Fuel tank shield kit shown BSJ10480 Fuel tank shield kit shown
RE267625 Mid fuel tank shown RE267625 Mid fuel tank shown
RE267623 Fuel tank shown RE267623 Fuel tank shown
Overview

Stay in the field longer with the mid fuel tank kit (BSJ10593). This fuel tank adds an additional 160.5 L (42.4 U.S. gal.) of fuel capacity.

Protect the fuel tanks from punctures by installing fuel tank shield kits.

Hydraulics

CASE DRAIN - 252FLVBSJ10283
BSJ10345 motor control kit shown BSJ10345 motor control kit shown
RE282528 Motor Control Kit shown	RE282528 Motor Control Kit shown
BXX10688 Motor Control Kit shown BXX10688 Motor Control Kit shown
RE193598 Power Beyond Kit shown RE193598 Power Beyond Kit shown
RE182800 Motor Control Kit shown RE182800 Motor Control Kit shown
BSJ10282 Power Beyond Kit shown BSJ10282 Power Beyond Kit shown
BSJ10194 Power Beyond Kit shown BSJ10194 Power Beyond Kit shown
BSJ10241 Power Beyond Kit shown BSJ10241 Power Beyond Kit shown
BSJ10240 Power Beyond Kit shown BSJ10240 Power Beyond Kit shown
BLV10416 Power Beyond Kit shown BLV10416 Power Beyond Kit shown
R228089 Power Beyond Kit shown R228089 Power Beyond Kit shown
RE242111 Power Beyond Kit shown RE242111 Power Beyond Kit shown
BSJ10091 Power Beyond Kit shown BSJ10091 Power Beyond Kit shown
BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown
BSJ10243 Motor Return Coupler Kit shown BSJ10243 Motor Return Coupler Kit shown
BSJ10428 Motor Case Drain Kit shown BSJ10428 Motor Case Drain Kit shown
BSJ10465 Rear SCV Oil Collection Kit shown BSJ10465 Rear SCV Oil Collection Kit shown
Overview

Adjust the continuous flow rate of the hydraulic fluid to the rear of the tractor with the motor control kit or get continuous flow with power beyond kits.

 

Benefits

  • Allows for hydraulic flow rate adjustments
  • Routes hydraulic flow to the rear of the tractor
  • Enables the operator to run implements and attachments requiring continuous flow such as a hydraulic motor

 

  • NOTE - A Power Beyond kit is NOT needed on any 5E 3-Cylinder tractors, as the hydraulic system design does not necessitate a power beyond kit.

 

Oil Collection System - 252FLVBSJ10465
BSJ10345 motor control kit shown BSJ10345 motor control kit shown
RE282528 Motor Control Kit shown	RE282528 Motor Control Kit shown
BXX10688 Motor Control Kit shown BXX10688 Motor Control Kit shown
RE193598 Power Beyond Kit shown RE193598 Power Beyond Kit shown
RE182800 Motor Control Kit shown RE182800 Motor Control Kit shown
BSJ10282 Power Beyond Kit shown BSJ10282 Power Beyond Kit shown
BSJ10194 Power Beyond Kit shown BSJ10194 Power Beyond Kit shown
BSJ10241 Power Beyond Kit shown BSJ10241 Power Beyond Kit shown
BSJ10240 Power Beyond Kit shown BSJ10240 Power Beyond Kit shown
BLV10416 Power Beyond Kit shown BLV10416 Power Beyond Kit shown
R228089 Power Beyond Kit shown R228089 Power Beyond Kit shown
RE242111 Power Beyond Kit shown RE242111 Power Beyond Kit shown
BSJ10091 Power Beyond Kit shown BSJ10091 Power Beyond Kit shown
BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown
BSJ10243 Motor Return Coupler Kit shown BSJ10243 Motor Return Coupler Kit shown
BSJ10428 Motor Case Drain Kit shown BSJ10428 Motor Case Drain Kit shown
BSJ10465 Rear SCV Oil Collection Kit shown BSJ10465 Rear SCV Oil Collection Kit shown
Overview

Adjust the continuous flow rate of the hydraulic fluid to the rear of the tractor with the motor control kit or get continuous flow with power beyond kits.

 

Benefits

  • Allows for hydraulic flow rate adjustments
  • Routes hydraulic flow to the rear of the tractor
  • Enables the operator to run implements and attachments requiring continuous flow such as a hydraulic motor

 

  • NOTE - A Power Beyond kit is NOT needed on any 5E 3-Cylinder tractors, as the hydraulic system design does not necessitate a power beyond kit.

 

POWER BEYOND - 252FLVBSJ10282
BSJ10345 motor control kit shown BSJ10345 motor control kit shown
RE282528 Motor Control Kit shown	RE282528 Motor Control Kit shown
BXX10688 Motor Control Kit shown BXX10688 Motor Control Kit shown
RE193598 Power Beyond Kit shown RE193598 Power Beyond Kit shown
RE182800 Motor Control Kit shown RE182800 Motor Control Kit shown
BSJ10282 Power Beyond Kit shown BSJ10282 Power Beyond Kit shown
BSJ10194 Power Beyond Kit shown BSJ10194 Power Beyond Kit shown
BSJ10241 Power Beyond Kit shown BSJ10241 Power Beyond Kit shown
BSJ10240 Power Beyond Kit shown BSJ10240 Power Beyond Kit shown
BLV10416 Power Beyond Kit shown BLV10416 Power Beyond Kit shown
R228089 Power Beyond Kit shown R228089 Power Beyond Kit shown
RE242111 Power Beyond Kit shown RE242111 Power Beyond Kit shown
BSJ10091 Power Beyond Kit shown BSJ10091 Power Beyond Kit shown
BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown BSJ10092 Hydraulic Motor Case Drain and Motor Return Kit shown
BSJ10243 Motor Return Coupler Kit shown BSJ10243 Motor Return Coupler Kit shown
BSJ10428 Motor Case Drain Kit shown BSJ10428 Motor Case Drain Kit shown
BSJ10465 Rear SCV Oil Collection Kit shown BSJ10465 Rear SCV Oil Collection Kit shown
Overview

Adjust the continuous flow rate of the hydraulic fluid to the rear of the tractor with the motor control kit or get continuous flow with power beyond kits.

 

Benefits

  • Allows for hydraulic flow rate adjustments
  • Routes hydraulic flow to the rear of the tractor
  • Enables the operator to run implements and attachments requiring continuous flow such as a hydraulic motor

 

  • NOTE - A Power Beyond kit is NOT needed on any 5E 3-Cylinder tractors, as the hydraulic system design does not necessitate a power beyond kit.

 

Lighting

Auxiliary Loader Light Kit - 252FLVBSJ10322
BSJ10416 loader light kit shown	BSJ10416 loader light kit shown
BSJ10422 loader light kit shown BSJ10422 loader light kit shown
SJ12628 loader light kit shown SJ12628 loader light kit shown
Overview

Loader light kits provide additional lights to be mounted on or near the loader mast arms allowing for additional light output when doing loader work.   

Auxillary Work Light Kit - 252FLVRE228854
BSJ10325 LED Headlights shown BSJ10325 LED Headlights shown
BXX10605 LED Headlights shown BXX10605 LED Headlights shown
BXX10605 LED Headlights shown on MY23 5E Premium Cab tractor BXX10605 LED Headlights shown on MY23 5E Premium Cab tractor
BSJ10056 Cab Auxiliary Work Light shown BSJ10056 Cab Auxiliary Work Light shown
BSJ10163 Led Light Kit Shown BSJ10163 Led Light Kit Shown
BSJ10478 LED Rear Work Light kit shown BSJ10478 LED Rear Work Light kit shown
#
LVB25547 Rear Work Light shown on 5E tractor LVB25547 Rear Work Light shown on 5E tractor
BSJ10420 Work Light Kit shown BSJ10420 Work Light Kit shown
RE228854 Work Light Kit shown in forward facing mounting position RE228854 Work Light Kit shown in forward facing mounting position
#
Overview

Work light kits offer additional light for increased visibility while working in dark conditions.

 

Benefits

  • Adjustable lights for placing light where you need it
  • OEM quality lights
  • Increased light output
LED HEADLIGHTS - 252FLVBSJ10325
BSJ10325 LED Headlights shown BSJ10325 LED Headlights shown
BXX10605 LED Headlights shown BXX10605 LED Headlights shown
BXX10605 LED Headlights shown on MY23 5E Premium Cab tractor BXX10605 LED Headlights shown on MY23 5E Premium Cab tractor
BSJ10056 Cab Auxiliary Work Light shown BSJ10056 Cab Auxiliary Work Light shown
BSJ10163 Led Light Kit Shown BSJ10163 Led Light Kit Shown
BSJ10478 LED Rear Work Light kit shown BSJ10478 LED Rear Work Light kit shown
#
LVB25547 Rear Work Light shown on 5E tractor LVB25547 Rear Work Light shown on 5E tractor
BSJ10420 Work Light Kit shown BSJ10420 Work Light Kit shown
RE228854 Work Light Kit shown in forward facing mounting position RE228854 Work Light Kit shown in forward facing mounting position
#
Overview

Work light kits offer additional light for increased visibility while working in dark conditions.

 

Benefits

  • Adjustable lights for placing light where you need it
  • OEM quality lights
  • Increased light output
Loader Indicator Light for FL3 Loaders on OOS tractor - 252FLVBSJ10422
BSJ10416 loader light kit shown	BSJ10416 loader light kit shown
BSJ10422 loader light kit shown BSJ10422 loader light kit shown
SJ12628 loader light kit shown SJ12628 loader light kit shown
Overview

Loader light kits provide additional lights to be mounted on or near the loader mast arms allowing for additional light output when doing loader work.   

Mirrors

MIRROR KIT, TELESCOPIC, LH & RH, MANUALLY ADJUSTED - 252FLVBSJ10473
BlV10423 mirror kit shown on right-hand A pillar BlV10423 mirror kit shown on right-hand A pillar
BSJ10347 mirror kit shown BSJ10347 mirror kit shown
SJ10016 mirror kit shown SJ10016 mirror kit shown
Similar kit (AL151224) shown for reference Similar kit (AL151224) shown for reference
BSJ10473 mirror kit shown on 5M Tractor BSJ10473 mirror kit shown on 5M Tractor
Overview

Increase rearward visibility from the operator’s station with a set of mirrors.

Benefits
  • Provides rear view of the field or road
  • Enables a better view of the rear hitch
Rear Mirror Mechanical - Left - 252FLVAL80126
Telescopic mirror mounted on 5020 Series Cab Telescopic mirror mounted on 5020 Series Cab
Telescopic mirror mounted on 5M Open Station Telescopic mirror mounted on 5M Open Station

Telescopic rearview mirrors provide operators with a wide rear view of the field or road. These mirrors are especially useful when towing wagons or large implements.

 

The mirrors are adjusted manually and telescope.

NOTE: If mounting mirrors on the 5M Open-Station Tractors, one RE244177 rearview mirror mounting kit is needed for each side.

Rear Mirror Mechanical - Right - 252FLVAL80127
Telescopic mirror mounted on 5020 Series Cab Telescopic mirror mounted on 5020 Series Cab
Telescopic mirror mounted on 5M Open Station Telescopic mirror mounted on 5M Open Station

Telescopic rearview mirrors provide operators with a wide rear view of the field or road. These mirrors are especially useful when towing wagons or large implements.

 

The mirrors are adjusted manually and telescope.

NOTE: If mounting mirrors on the 5M Open-Station Tractors, one RE244177 rearview mirror mounting kit is needed for each side.

Operator's Station

12” Tablet Holder Kit (Ipad Pro™) - 252FLVBXE10864
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

38.1-mm (1.5–in.) ball mount and socket arm - 252FLVRE574454
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Accessory Mounting Bracket - Short Bar - 252FLVRE343680

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

 

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mount Mounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mount Mounting bracket with cell phone and tablet mount

RAM is a trademark of National Products Inc.

Apple™ Cable, 6 Ft - 252FLVPM191-050594
Bracket, Arm, RAM Double Socket - 252FLVPF80459
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Cell Phone Mount Kit - 252FLVBRE10015

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

 

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mount Mounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mount Mounting bracket with cell phone and tablet mount

RAM is a trademark of National Products Inc.

Cell Phone Suction Cup Kit - 252FLVBXE10606
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Display Rail - 252FLVBSJ10490
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Dual USB Charger - 252FLVPM191-052901
Micro USB Cable, 6 Ft - 252FLVPM191-050563
Mount - RAM U-Bolt - 252FLVPF80460
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Mounting Ball Stud - 252FLVRE558821
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Mounting Parts - Display Mount RAM - 252FLVAL212683
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

RAM Mount Vesa Bracket 1.5 - 252FLVUC17356
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Self - Leveling Cup Holder - 252FLVBRE10152

A favorite worldwide, the RAM self-leveling cup holder is now available as a kit - designed specifically for Deere equipment. It is easily installed to keep your favorite beverage upright even in the roughest terrain. The perfect accessory for any cab that has 10-mm mounting bosses.

Self-leveling cup holder John Deere branded beverage insulator included Self-leveling cup holder John Deere branded beverage insulator included
#

The new cup holder features a unique self-leveling design. This pivoting design allows easy adjustment for the holder while offsetting motion of the vehicle when moving.

Features and applications:

  • Self-leveling action reduces spills
  • Durable design for rough environments
  • Easy adjustable mounting for ideal placement
  • Includes John Deere branded beverage insulator
  • Compatible with most monitor brackets and all 10-mm threaded bosses
Tablet Mount Kit - 252FLVBRE10255
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Type C USB Cable, 6 Ft - 252FLVPM191-050860
X-Grip Tablet Dual Suction Cup Kit for Tablets - 252FLVBXE10607
Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab Tablet, cellphone, and cupholder mounted on mounting bracket in 5E Cab
Locking suction assembly mounted in 5E Cab Locking suction assembly mounted in 5E Cab
RE343680 mounted in 5E Cab RE343680 mounted in 5E Cab
RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown RE576490 (top) and RE558821 (bottom) mounted in 5E Cab shown

There are several locations to mount the threaded ball into the cab. Any of the threaded bosses included in the cab can be used (once the factory plastic plug is removed). The threaded ball can also be mounted into the slot of the RE343680 mounting bracket (also sold separately).

Build Your Own Mounting Solutions
Tie rods and ball mounts shown on RE343680 Tie rods and ball mounts shown on RE343680
AL212683 tie-rod assembly	AL212683 tie-rod assembly
PF80460 ball mount PF80460 ball mount
RE574454 tie rod assembly RE574454 tie rod assembly
UC17356 ball mount UC17356 ball mount
AXE59372 clamp-style accessory bracket shown AXE59372 clamp-style accessory bracket shown
BRE10482 and BRE10483 T-slot mounts shown BRE10482 and BRE10483 T-slot mounts shown
BXE10864 tablet mount assembly shown BXE10864 tablet mount assembly shown
BSJ10490 Display rail shown BSJ10490 Display rail shown

Overview

Mount your John Deere displays, cell phone, tablet, cup holder, or aftermarket products with these mounting solutions from John Deere. There are also variety of additional mounting part solutions available to resolve your unique mounting configuration needs.

 

Benefits

  • Operators can keep important items in the right place.
  • Customizable to operators needs.

12V Charging Solutions 

Wheel Tread Width

Hub Extension 60mm, Front, Tread Adjustment - 252FLVAL156778

Axle extensions are required to achieve tread settings greater than 78.7 in. on eight-position wheels.

Rear Axle 1.2 in. Extension (30 mm) - 252FLVL154683

Axle extensions are required to achieve wider tread settings.

Rear Axle 1.6 in. Extension (40 mm) - 252FLVL154682

Axle extensions are required to achieve wider axle tread settings.

Rear Axle 4.4 in. Extension (111 mm) - 252FLVL154684

Axle extensions are required to achieve wider axle tread settings.

Videos



footer logo

In 1953, Wyatt (JR) Smith bought Smith Tractor Company. Smith originally purchased a Ford tractor dealership until the company took on John Deere products in January of 1987. Since then, Smith Tractor Company has proudly provided John Deere equipment and service throughout Florida & Alabama. Our customer base is built on relationships and in today’s corporate world that is a rare commodity. You will find quite a bit of inventory if you take a trip to one of our locations.

map

Frisco City, AL
3854 Bowden St.
Frisco City, AL 36445
Phone 251-267-2500
Toll Free 800-221-4052 Option 3
Directions

Atmore, AL
8974 Hwy 31
Atmore, AL 36502
Phone 251-368-1720
Toll Free 800-221-4052 Option 2
Directions

Jay, FL
3834 Highway 4
Jay, FL 32565
Phone 850-675-4505
Toll Free 800-221-4052 Option 1
Directions

SUBSCRIBE TO OUR NEWSLETTER

Select a Location

Jay

Atmore

Frisco City

Select a Department

Select a Department

Select a Department

© COPYRIGHT 2024 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo