×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

4052M Heavy Duty

Compact Utility Tractor


  • Factory-installed 440R Quick Park™ Loader Mounting System included
  • Turbocharged diesel engine
  • eHydrostatic Transmission
  • Standard mid and rear hydraulics
  • Category 1 and 2, Three-point hitch



Starting At:

$53,258.00

View Product Brochure

Features

Increased versatility with Category 1 and 2 implement compatibility
3-point rear hitch 3-point rear hitch

The rear hitch on 4M Heavy-Duty Tractors provides producers with implement versatility to perform in a variety of applications. Attaching implements is convenient with telescoping draft links and Category 1 and 2 hitch balls in base equipment. The mechanical hitch control also features a depth stop and a rate of drop adjustment. This feature provides consistency when lowering the hitch. Each time the position control lever is pushed forward, it stops where the depth stop has been positioned. This is valuable to anyone who desires consistent, level ground.

 

The 3-point hitch has plenty of lift capacity to handle heavy implements.

 

3-point hitch lift capacity

610-mm (24-in.) behind center

3-point hitch lift capacity

at lift link ends

1134 kg (2500 lb) 1420 kg (3130 lb)

 

Category 1 and Category 2 hitches allow for hookup of a variety of 3-point hitch implements.

  • Right-hand lift link and center-link are adjustable to save time when leveling equipment.
3-point hitch control
3-point hitch control 3-point hitch control
#

The 3-point hitch control on the 4M Heavy-Duty Series Tractors is called position control.

  • Operates precisely with no jerking or leak down
  • 3-point hitch lever features easy-to-read increments for accurate positioning and an easy-to-adjust depth stop control 
  • The S-hook is provided to secure the center-link when hitch is not used
Rate-of-drop/stop valve
Rate-of-drop/stop valve shown on 4M Heavy-Duty Tractor Rate-of-drop/stop valve shown on 4M Heavy-Duty Tractor

Rate-of-drop/stop valve regulates lowering speed of 3-point hitch. It can be shut off completely to stop hitch movement.

Telescoping draft links (extendable draft links)

Telescoping draft links will reduce the amount of effort to attach 3-point hitch implements by allowing the operator to make small adjustments without moving the tractor. It is standard on 4M Heavy-Duty Tractors.

 

Horizontal sway bar stabilizers regulate side-to-side sway of 3-point-hitch-mounted equipment.

  • 4M Heavy-Duty Tractors come equipped with the horizontal stabilizer bars, the lock pin goes into the stabilizer bar vertically
  • Mounted on outside of lower links for fast, easy equipment hookup
  • Top-pull pin design allows easy adjustment without use of tools
  • Retainer cable holds pin while pin is removed to adjust stabilizers

 

Rockshaft position control lever allows operator to accurately set implement depth or height.

  • Operates precisely with no jerking or leak down
  • Control lever features easy-to-read increments for accurate positioning

 

Easy-to-adjust depth stop enables the operator to lower implement to a predetermined depth.

Excellent visibility provided by standard lighting equipment
Wraparound-style wide-angle halogen headlights Wraparound-style wide-angle halogen headlights
Lamps provide better visibility Lamps provide better visibility
Headlights and lamps for increased lighting Headlights and lamps for increased lighting
Fender-mounted working lights Fender-mounted working lights

Standard equipment lighting includes:

  • Wraparound-style wide-angle halogen headlights for better lighting and visibility
    • Premium integrated automotive-style headlight bezels
  • Two amber flashing warning lights
  • Two fender-mounted forward and rear working lights
  • All lighting and markings comply with ASAE S279
Maximize productivity with an eHydro™ transmission

The tractor is available with a three-range electronic hydrostatic (eHydro) transmission.

  • Fluid under pressure transmits engine power to the drive wheels using a pump and motor
  • Functions both as a clutch and transmission
  • Provides high torque for startup
  • Reduces powertrain shock loads

Danfoss® supplies both the pump and motor. This ensures that the components are matched to each other, providing maximum efficiency.

 

The electronic hydrostatic transmission is ideally suited for jobs where productivity is a must, such as loader or mower applications.

Twin Touch™ foot controls allow the operator to select both directions of travel and speed with a touch of the toe.

Key features of the eHydro transmission:

  • Infinitely variable ground speeds, in each range, allow the operator to match the speed of the tractor to the job.
  • No clutching means fast and easy direction changes.
  • Twin Touch foot pedals provide quick and easy forward/reverse operation.
  • Cruise control is standard equipment:
    • Cruise control switch is located on the right-hand console for easy access.
    • Cruise control is electronically engaged and disengaged, which allows for precise setting of speed.
Danfoss eHydro transmission Danfoss eHydro transmission
#

Danfoss eHydro transmission is used for reliable operation. Durability features include:

  • Large forged trunnion shaft with larger support bearings that reduce vibration and noise

  • Center section made from ductile iron (much stronger than grey iron used in many competitive transmissions)

  • Transmission oil cooler cools transmission oil for longer transmission life

Safety features of the eHydro transmission include:

  • The tractor will start with one or both foot pedals depressed, but it will not move until both pedals first return to neutral.

  • Operator presence system means the tractor will come to a stop if the operator leaves the seat but will not shut off unless the power take-off (PTO) is also running.

Key John Deere advantage
Twin Touch foot controls Twin Touch foot controls
#

John Deere's Twin Touch foot controls offer key advantages over competitive hydro model tractors.

  • Some competitive hydrostatic tractors use a treadle pedal designed (toe-heel) foot control for operation of the hydro.
    • Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
Integrated eHydro features

The eHydro convenience controls have been integrated into a single module. Combining features such as SpeedMatch™ LoadMatch™, MotionMatch, eThrottle, and automotive-style cruise control pulls the maximum efficiency out of the eHydro transmission tractors. All these features are standard on the 4M Heavy Duty and 4R models and deliver customers an easier and more comfortable experience.

eHydro convenience control module eHydro convenience control module
#

 

Press button to active/deactivate eThrottle. When eThrottle is activated, depression of the travel pedal increases engine rpm and tractor speed.

Press button to active/deactivate LoadMatch.  When LoadMatch is activated, engine will not stall during heavy load applications.

Press button to activate/deactivate SpeedMatch.  When SpeedMatch is activated, operator is able to set the desired maximum travel speed.

Press button to activate/deactivate cruise control.  When cruise control is activated, operator is able to set cruise speed.

Press button to set cruise speed, or to decrease cruise/set max speed.

Press button to resume set cruise speed, or to increase cruise/set max speed.

MotionMatch - longer accelerate and decelerate distances.

MotionMatch - shorter accelerate and decelerate distances.



eThrottle

eThrottle indicator eThrottle indicator
#

Press a button to activate/deactivate eThrottle. When eThrottle is activated, depression of the travel pedal increases engine rpm and tractor speed simultaneously. This provides the operator with comfort and convenience as well as fuel economy.

Automotive-style cruise control
Cruise control indicator Cruise control indicator
#

An automotive-style cruise control is standard equipment on the 4M Heavy-Duty and 4R Series Tractors. Cruise control is electronically engaged and disengaged and is located on the right-hand operator console.

  • Maintains desired forward speed without pressure on the foot pedal
  • When activated, the operator is able to set cruise speed:
    • Use the SET/- button to set cruise speed, or to decrease cruise/maximum speed
    • Use the RES/+ button to set cruise speed, or to increase cruise/maximum speed
  • A speed sensor also allows the tractor to maintain preset speed driving up and down hills
  • To disengage the cruise control, either:
    • Apply pressure to the brakes
    • Disengage cruise control button
    • Briefly depress the reverse travel pedal
LoadMatch power management system
LoadMatch indicator LoadMatch indicator
#

LoadMatch is a standard feature on the 4M Heavy-Duty and 4R Series Tractors.

 

If torque requirements increase significantly, the transmission will reduce the tractor's drive speed to compensate for the increased load on the transmission, maximizing torque to drive wheels and minimizing stalls.

 

Controls automatically adjust LoadMatch compensation depending on the tractor’s application. PTO applications require less engine speed fluctuation, therefore adjusting the amount of droop depending on PTO speed. This adjustment increases efficiency and optimizes engine speed and torque output based on tractor application.

 

While typically left on, LoadMatch can be turned off with the right-hand console controls.


MotionMatch
 

MotionMatch, standard on the 4M Heavy-Duty and 4R Series Tractors, is located on the right-hand console. It offers seven settings for adjusting the rollout or decelerating when the pedal is released.

MotionMatch indicator MotionMatch indicator
#

This icon indicates longer accelerate and decelerate distances.

MotionMatch indicator MotionMatch indicator
#

This icon indicates shorter accelerate and decelerate distances.

SpeedMatch
SpeedMatch indicator SpeedMatch indicator
#

SpeedMatch, standard on the 4M Heavy-Duty and 4R Series Tractors, further enhances the eHydro cruise control functions by allowing the operator to preset maximum speed. Once this feature is engaged, the operator must stroke the travel pedal fully to meet the operator’s preset speed and press the Set button to lock the speed. From there, the operator can use the automotive-style cruise controls to adjust speed. This function will improve accuracy and safety, particularly at lower travel speed applications.

 

Rotary tilling or spraying applications are examples of where SpeedMatch can be applied. SpeedMatch will work in both the forward and reverse set speeds.

 

NOTE: Automotive-style cruise control and SpeedMatch can be used in conjunction with LoadMatch to maximize productivity.

 

Danfoss is a trademark of Danfoss A/S Corporation.

Increase productivity with integrated mid-mount loader selective control valve (SCV) and mechanical rear SCV
Dual mid SCV Dual mid SCV

The tractor is base equipped with a dual mid SCV.

  • Two sets of right-hand side-mounted couplers allow operating four hydraulic functions (such as raising/lowering boom and curling/dumping bucket).
  • Large 12.7-mm (0.5-in.) diameter couplers are used for maximum oil flow to implements.
  • Hydraulic valves have excellent featherability for smooth operation of equipment.
  • Couplers are color coded for correct hookup.
  • Hydraulic regenerative (REGEN) active, in dump position, out of neutral:
    • Provides faster dump cycle
    • Prevents cylinder voiding
Single rear SCV

The tractor is also base equipped with a mechanical rear SCV with float function

  • One set of rear mounted couplers allow operating rear mounted hydraulic implements.
  • Large 12.7-mm (0.5-in.) diameter couplers are used for maximum oil flow to implements.
  • Hydraulic valves have excellent featherability for smooth operation of equipment.
Optional mid electrohydraulic third SCV
Mid electrohydraulic third SCV control Mid electrohydraulic third SCV control

Optional on the 4M Heavy-Duty Tractors is the factory-installed mid third-function SCV. This SCV adds versatility to tractor loader packages and enables the use of attachments such as a four-in-one bucket or root grapple.

The third function is controlled by a switch comfortably located on the loader joystick.

SCV controls
SCV controls SCV controls
  • Single control lever (A) makes operation of loader or other implements fast and simple.
  • SCV safety lock lever (B) allows the operator to control the type of SCV lever movement needed for a particular operation or situation.
  • The SCV safety lock lever allows loader hydraulics to be locked out so the boom and bucket will not drop if SCV lever is accidentally bumped.
  • The SCV safety lock lever allows loader hydraulics to be locked out so the bucket will not dump if SCV lever is accidentally bumped.

 

NOTE: REGEN hydraulics should never be hooked to a motor or to a 2-cylinder angling operation such as a snowblade.

Powerful Yanmar® diesel engine delivers plenty of power under heavy loads
Powerful Yanmar engine Powerful Yanmar engine

The Yanmar diesel engine has a high-torque reserve that provides plenty of power under heavy load.

 

This 4-cylinder engine features lower levels of exhaust emissions and reduced noise levels. It meets Environmental Protection Agency (EPA) Final Tier 4 (FT4) emission standards.

Model Number of cylinders Engine displacement Aspiration Rated rpm Gross engine hp* Gross engine ps* PTO hp
4044M/R 4 2.2L Natural 2600 42.5 43.1 32.5
4052M/MHD/R 4 2.1 L Turbocharged 2600 50.8 51.5 39.9
4066M/MHD/R 4 2.1 L Turbocharged 2600 65 65.9 52

*Engine hp (kW), gross SAE J1995: 43.1 (31.7) at 2600 rpm, PS Displacement, cu in. (L):134.25 (2.2)

*Engine hp (kW), gross SAE J1995: 51.5 (37.9) at 2600 rpm, PS Displacement, cu in. (L):128.15 (2.1)

*Engine hp (kW), gross SAE J1995: 65.9 (48.5) at 2600 rpm, PS Displacement, cu in. (L):128.15 (2.1)

 

The engine uses the latest technology to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

 

The common rail system (CRS) optimizes fuel economy and reduces operating costs compared to engines not using CRS technology. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and lower cost of operation.

 

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

 

The engine comes with an aftertreatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel   oxidation catalyst (DOC). After many hours of use, the exhaust filter may require an ash removal service.

DPF cleaning

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning

  • DOC/DPF pressure sensors

  • A particulate matter buildup estimation based on load conditions

 

Once one of the three conditions have been met, filter cleaning will occur.

 

There are three different types of filter cleaning processes:

  • Passive filter cleaning
  • Active filter cleaning
  • Parked filter cleaning

 

Passive filter cleaning

Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

 

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

 

Active filter cleaning

If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then PM is removed using active filter cleaner. To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize PM.

 

It is important to note that at no time is the fuel in the DOC/DPF ignited, and there is no flame within the DOC/DPF.

 

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

 

Parked filter cleaning

In some instances where passive and active filter cleaning have not fully cleaned the PM from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

 

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

 

This system constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

 

NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.

Key features of the engine are:

  • 540-rpm power take-off (PTO) operation at 2600 engine rated speed means better fuel economy, less noise and vibration, and longer overall engine life
  • Cast-in-block cylinder design for good cooling and long life
  • Hydraulic lifters are quieter and require no adjustment
  • Heavy-duty crankshaft provides more bearing surface area for added durability
  • CRS optimizes fuel economy, lowering the cost of operation
  • ECU provides optimum control and accuracy
  • Direct fuel injection
    • Improves starting
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel
    • Glow plugs (cold starting aid)
  • Engine oil cooler, cools engine oil for longer engine life
  • Key start and shutoff eliminates fuel shutoff knob
    • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
    • Sealed radiator compartment keeps trash and debris on outside of hood
Dry-type air cleaner Dry-type air cleaner
#
  • Dry-type air cleaner with safety element and electronic air service indicator
    • Electronic air restriction indicator alerts operator when air filter servicing is required
    • Dual-element design for added engine protection
    • Easy to service
  • Standard side exhaust
  • Discharges fumes away from the operator, reducing engine noise
  • Improves operator visibility when using a loader or front implement
  • Optional vertical exhaust

Yanmar is a trademark of Yanmar Company Limited.

Improved traction in muddy conditions with larger tires
4M Heavy-Duty rear tire 4M Heavy-Duty rear tire

Rain or shine, your work needs to get done. The 4M Heavy-Duty Tractor comes with larger, tougher tires to help keep you moving no matter what the weather brings. 

  • Offers two rear tire size options:
    • 16.9-24 (8PR, R4 Industrial, two-position)
    • 19.5L-24 (10PR, R4 Industrial, two-position)
  • Allows for better traction in wet and muddy conditions
  • Has a higher ply rating, which allows for better control and comfort when carrying heavy loads
4052M HD with rotary cutter and front loader 4052M HD with rotary cutter and front loader
4066M HD with 440R Loader and Frontier™ land plane 4066M HD with 440R Loader and Frontier™ land plane

Specs & Compare

ADD MODEL

Key Specs

4052M Heavy Duty
Current Model
Engine power (gross)37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) powereHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Steering hydraulics23.5 L/min
6.2 gpm
Implement hydraulics42.3 L/min
11.2 gpm
Hitch typeCategory 1/Category 2
Lift capacity, 24-in. behind link arms1135 kg
2500 lb
Standard transmission; forward/reverseeHydro transmission
Cruise controlStandard
Approximate shipping weight (open-station; cab)Open station: 1943 kg
4255 lb
Cab: Not applicable
Wheelbase185.5 cm
73 in.

Engine

FamilyEYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
ManufacturerYanmar®
Engine model4TNV86CT-MJT
Engine power (gross)37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) powereHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Rated engine speed2600 rpm
TypeDiesel
Injection pump typeHigh-pressure common rail direct injection
AspirationTurbocharged
Emissions complianceFinal Tier 4
Cylinders/displacement4 cylinders
2.091 L
127.6 cu in.
Number of cylindersFour
Cylinder linersCast-in-block
Bore and stroke86 x 90 mm
3.4 x 3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemLiquid
Air cleanerDual element with electronic restriction indicator
Engine torque at rated speed139 Nm
102.5 lb-ft
Fuel tank capacity56.9 L
15 U.S. gal.

Electrical

Battery size770 CCA
Alternator (12-V)75 amp
Starter size2 kW
2.68 hp

Fuel system

TypeHigh pressure common rail direct injection
Fuel consumption

Transmission

Standard transmission; forward/reverseeHydro transmission
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear rangeseHydro - Infinitely-variable three range
Final drivePlanetary
BrakesMulti-plate wet disc
SteeringHydrostatic power steering
Clutch, wet/dryWet
Clutch disk diameter wet clutch129 mm
5.08 in.
Axle capacityFront
1600 kg
3528 lb
Rear
2400 kg
5292 lb
CreeperSpeedMatch™ standard
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load

Hydraulics

TypeOpen center
Pump rated outputSteering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
Pump typeSingle gear
Maximum operating pressure
Draft control sensingPosition control
Remote control valves availableTwo remotes standard

3-point hitch

TypeCategory 1/Category 2
Lift capacity, 24-in. behind link arms1135 kg
2500 lb

Power take-off (PTO)

StandardIndependent 540 rpm at 2600 rpm
Optional540E rpm
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)
Engagement method

Fluid capacities

Crankcase with filter5.3 L
1.4 qt
Transmission and hydraulic system47.3 L
12.5 gal.

Final drive

TypePlanetary
Differential lockYes

Operator station

Rollover protective structureType
Foldable
Yes
Platform - flat/straddleFlat
Gear shift location - console/floor

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Height
Wheelbase185.5 cm
73 in.
Front axle clearance35.1 cm
13.8 in.
Turning radius with brakes2.8 m
9.19 ft
Turning radius without brakes3 m
9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab)Open station: 1943 kg
4255 lb
Cab: Not applicable

Tires

FrontR4 Industrial 31.5x13-16.5
RearR4 Industrial 16.9-24
R4 Industrial 19.5L-24
Front tread range1374.6 mm
54.1 in.
Rear tread spacing1375 mm
54.1 in.
1495 mm
58.9 in.

Miscellaneous

Toolbox
Tilt steering wheel
12-V Outlet

Additional information

Offers & Discounts

studio image of 4052m heavy duty compact utility tractor

Save $1,000 with cash purchase1

on New John Deere 4M Heavy Duty Compact Tractors

  • Save $1,0001 on the purchase of 4M Heavy Duty Compact Tractors
  • Offer available 01 February 2023 through 01 May 2023
Studio image of 4052m compact utility tractor

3.9% APR fixed rate for 84 months1

on New John Deere 4M Heavy Duty Compact Tractors

  • 3.9% APR fixed rate for 84 months1 OR
  • 0% fixed rate for 36 months2
  • Offer available 01 February 2023 through 01 May 2023

1Offer valid on qualifying purchases made 01 February 2023 through 01 May 2023. Prices and models may vary by dealer. Save $1,000 USD on 4052M Heavy Duty & 4066M Heavy Duty only. This cannot be combined with the regular installment options. Sales to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

1Offer valid on qualifying purchases made 01 February 2023 through 01 May 2023. Subject to approved installment credit with John Deere Financial. Down payment may be required. Average down payment is 10%. $27.78 per month for every $1,000 financed. 3.9% APR for 84 months only. Taxes, freight, setup, insurance, fees, and delivery charges could increase monthly payment. Sales to government agencies, company direct sales or other individuals or entities participating in any John Deere Special Discount Program or Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

2Offer valid on qualifying purchases made 01 February 2023 through 01 May 2023. Subject to approved installment credit with John Deere Financial. Down payment may be required. Average down payment is 10%. $27.78 per month for every $1,000 financed. 0% APR for 36 months only. Taxes, freight, setup, insurance, fees, and delivery charges could increase monthly payment. Sales to government agencies, company direct sales or other individuals or entities participating in any John Deere Special Discount Program or Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

Accessories & Attachments



Accessories

3-Point Hitch Tractor Receiver Hitch - 035ALVLP25001
LP25001 3pt hitch receiver hitch shown LP25001 3pt hitch receiver hitch shown
Overview

Move trailers and other wheeled implements easily with the 3-point receiver hitch.

Benefits
  • Easily move trailers and other wheeled implements
  • Accepts standard 2-inch receivers ball mounts
  • Compatible with CAT 1 IMatch Quick Hitch or and CAT 1 3pt tractor hitch
38.1-mm (1.5–in.) ball mount and socket arm - 035ALVRE574454
Bracket, Arm, RAM Double Socket - 035ALVPF80459
Chain Box - 035ALV5WS812470
Chainsaw Holder - 035ALV5WS812460
Clamp Kit - 035ALV5WS812485
Handheld Leaf Blower Holder - 035ALV5WS812466
Horn Kit - 035ALVBLV10359
BLV10359 horn kit shown BLV10359 horn kit shown
Overview

A horn kit provides an audible alert to bystanders.

Long Tool Holder (2) - 035ALV5WS812450
Long Tool Holder (4) - 035ALV5WS812455
Magnetic hitch pin - 035ALVLP63768
Mini Clamp Kit - 035ALV5WS812480
Mount - RAM U-Bolt - 035ALVPF80460
Mounting Ball Stud - 035ALVRE558821
Mounting Parts - Display Mount RAM - 035ALVAL212683
RAM Mount Vesa Bracket 1.5 - 035ALVUC17356
ROPS Rack - 035ALV5WS812430
String Trimmer Holder - 035ALV5WS812475
Super Clamp Kit - 035ALV5WS812490
Universal Mount Kit - 035ALV5WS812435

Front Hitch

Category 1 Three-Point Hitch Lift Arms and Torsion Tube - 035ALVBLV10088
BLV10989 3 point hitch kit shown BLV10989 3 point hitch kit shown
BLV10088 CAT 1 lift arms and torsion tube shown BLV10088 CAT 1 lift arms and torsion tube shown
BLV10091 HD push bar shown BLV10091 HD push bar shown
BLV10990 mid aux coupler kit shown BLV10990 mid aux coupler kit shown
blv10991 rear aux coupler kit shown blv10991 rear aux coupler kit shown
BLV10991 hydraulic accumulator kit shown BLV10991 hydraulic accumulator kit shown
Overview

Front hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
Front Three-Point Hitch - 035ALVBLV10989
BLV10989 3 point hitch kit shown BLV10989 3 point hitch kit shown
BLV10088 CAT 1 lift arms and torsion tube shown BLV10088 CAT 1 lift arms and torsion tube shown
BLV10091 HD push bar shown BLV10091 HD push bar shown
BLV10990 mid aux coupler kit shown BLV10990 mid aux coupler kit shown
blv10991 rear aux coupler kit shown blv10991 rear aux coupler kit shown
BLV10991 hydraulic accumulator kit shown BLV10991 hydraulic accumulator kit shown
Overview

Front hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements
Heavy-Duty Push Bar - 035ALVBLV10091
BLV10989 3 point hitch kit shown BLV10989 3 point hitch kit shown
BLV10088 CAT 1 lift arms and torsion tube shown BLV10088 CAT 1 lift arms and torsion tube shown
BLV10091 HD push bar shown BLV10091 HD push bar shown
BLV10990 mid aux coupler kit shown BLV10990 mid aux coupler kit shown
blv10991 rear aux coupler kit shown blv10991 rear aux coupler kit shown
BLV10991 hydraulic accumulator kit shown BLV10991 hydraulic accumulator kit shown
Overview

Front hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.

 

NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install

Benefits
  • Quick installation of implements
  • Increased productivity
  • Adaptable for various front mounted implements

Open Operator's Station

Canopy - Standard - 035ALVLVB25334
Canopy Mounting Bracket and Hardware Kit - 035ALVLVB25332
Left Hand Mirror Kit - 035ALVBLV11034
Right Hand Mirror Kit - 035ALVBLV11035
ShadePro Designed Canopy - 035ALVBXX10590

Rear Wheel Weights

Attaching Hardware for Starter Rear Wheel Weight, 110 lb (50 kg) - 035ALVBM19939
BM19936 Wheel weight hardware kit shown BM19936 Wheel weight hardware kit shown
Overview

Wheel weight hardware kits take the guessing out of what hardware is required to mount wheel weights to the tractor.   

 

For more information on which kit is right for you: wheel weight

Attaching Hardware for Rear Wheel Weight, 110 lb (50 kg) - 035ALVBM19940
BM19936 Wheel weight hardware kit shown BM19936 Wheel weight hardware kit shown
Overview

Wheel weight hardware kits take the guessing out of what hardware is required to mount wheel weights to the tractor.   

 

For more information on which kit is right for you: wheel weight

Weight, Rear Wheel 106 lb (48 kg) - 035ALVT19293
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown) UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown) BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown) BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown) BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown) T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown) BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview

Wheel weights provide extra traction and stability by adding ballast to the rear wheels.

 

Click here to view the Wheel Weight Compatibility Guide

Three-Point Hitch

Quik-Coupler, Economy, Category 2 - 035ALVTY27545
iMatch™ Quick Hitch Bushings - 035ALVLVU12858
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick Hitch Bushings - 035ALVLVU15507
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

iMatch™ Quick-Hitch Category 1 with adjustable top hook - 035ALVLVB25976
iMatch™/Quik-Coupler Bushing Kit - 035ALVBW15056
LP25004 iMatch Bushing Kit shown on iMatch Hitch LP25004 iMatch Bushing Kit shown on iMatch Hitch
BW15056 Bushing Kit shown BW15056 Bushing Kit shown
LVU12858 Bushing shown LVU12858 Bushing shown
LVU15507 Bushing shown LVU15507 Bushing shown
Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits
  • Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
  • Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

Reviews



Videos



footer logo

In 1953, Wyatt (JR) Smith bought Smith Tractor Company. Smith originally purchased a Ford tractor dealership until the company took on John Deere products in January of 1987. Since then, Smith Tractor Company has proudly provided John Deere equipment and service throughout Florida & Alabama. Our customer base is built on relationships and in today’s corporate world that is a rare commodity. You will find quite a bit of inventory if you take a trip to one of our locations.

map

Frisco City, AL
3854 Bowden St.
Frisco City, AL 36445
Phone 251-267-2500
Toll Free 800-221-4052 Option 3

Atmore, AL
8974 Hwy 31
Atmore, AL 36502
Phone 251-368-1720
Toll Free 800-221-4052 Option 2

Jay, FL
3834 Highway 4
Jay, FL 32565
Phone 850-675-4505
Toll Free 800-221-4052 Option 1

SUBSCRIBE TO OUR NEWSLETTER

Select a Location

Jay

Atmore

Frisco City

Select a Department

Select a Department

Select a Department

© COPYRIGHT 2023 SMITH TRACTOR CO. EQUIPMENT - ALL RIGHTS RESERVED| Privacy Policy | Powered ByEQHarvest logo