6155rh

Hi-Crop Tractor

  • High clearance for ridged crops
  • Durable John Deere 6 cylinder, 6.8L PowerTech™ Final Tier 4 Engine
  • ComfortView™ cab for all day comfort



View Product Brochure



Features



Overview

Exclusive to the 6155R Tractor, the optional rear drop axle provides additional crop clearance under the axle as well as additional drawbar clearance, when compared to a base axle with high clearance tires.

Rear drop axleRear drop axle

Benefit

  • Additional crop clearance

Details

The drop axle features a flanged-type axle end that provides up to a maximum drop of 295 mm (11.6 in.) and can accommodate tread settings from 1524 - 2235 mm (60 to 88 in.). The hi-crop option is only compatible with 18.4R38-in. 141A8 R2 rear and 320/90R46-in. 148A8 R2 radial front wheels and tires or 320/90R50-in. 147A8 R1W rear and 320/90R50-in. 147A8 R1W radial front wheels and tires.

Loaders are not compatible with this configuration.

 

CodeDescriptionModel
5028High crop drop axle6155R
Overview

The Generation 4 CommandCenter creates the primary user interface for 6R Series Tractors. The Generation 4 CommandCenter provides an excellent, user-savvy operating experience.

Producers can also use a variety of implements with the Generation 4 CommandCenter as it is ISOBUS virtual terminal (VT) capable.

 

Expect machine productivity gains, along with increased operator confidence, thanks to a simple, customizable interface. The reliability of the Generation 4 CommandCenter also aids in optimal operating experience and maximizes uptime.

 

4200 CommandCenter 21.3-cm (8.4-in.) display4200 CommandCenter 21.3-cm (8.4-in.) display
4600 CommandCenter  25.4-cm (10-in.) display4600 CommandCenter 25.4-cm (10-in.) display

Benefits

  • Easy-to-change fields and guidance lines
  • Custom-defined views
  • On-screen help functions
  • Intelligent warnings
  • Context-based help

Details

CodeDescription
19474200 Processor (21.3-cm [8.4-in.] display only)
19464600 Processor (25.4-cm [10-in.] display only)

 

CodeDescription
182921.3-cm (8.4-in.) CommandCenter display (4200 Processor only)
182225.4-cm (10-in.) CommandCenter display (4600 Processor only)

 

CodeDescription
1845Less activations
1851CommandCenter AutoTrac™ activation 21.3-cm (8.4-in.) or 25.4-cm (10-in.) display

 

NOTE: CommandCenter AutoTrac activation stays with the tractor.
NOTE: 6155RH only available with code 1845.

Layout manager
Layout manager selection pageLayout manager selection page
Layout manager module buildLayout manager module build

The Generation 4 CommandCenter features a modular-designed layout manager, so an operator can easily create the structure that meets the operator’s demands. From the factory, machines are equipped with standard run pages. An unlimited amount of run pages can be added to the Generation 4 CommandCenter based on operator preference or operational needs. Toggling between run pages is as easy as swiping the screen or using the arrow buttons on the top right portion of the title bar.

 

Users and access

Users and access allow the owner to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with an owner-defined four-digit code.

 

Lockout features are available for:

  • Precision Ag Technology applications
  • Hitch
  • Hydraulic
  • Transmission
  • Power take-off (PTO)
  • FieldCruise™ engine controls
  • Display
  • Machine monitor

On-screen help and diagnostic text

There are a number of different ways to get meaningful on-screen help when navigating the Generation 4 CommandCenter. Operators can find the help icon on the shortcut bar on the bottom of every page. This icon gives detailed information on everything from tractor operation to application information. Simply select the help icon and navigate to the information section that is needed.

 

Help iconHelp icon
Help center main pageHelp center main page

Additionally, application-based help is also available in all locations of the CommandCenter. Simply click on the (i) icon available on the title bar and it will lead directly to more information on the application currently being used.

 

Context-based help iconContext-based help icon
Context-based help iTEC™ main pageContext-based help iTEC™ main page

Diagnostic text and information is available for better understanding of whether applications are operating as directed.

Machine monitor
Machine monitor pageMachine monitor page

The machine monitor application provides the user instantaneous readings about the status or condition of the machine. Values shown in the machine monitor vary by application, but typically include parameters like engine speed, coolant temperature, and ground speed. The machine monitor supports run page modules in the layout manager, allowing the user to populate specific machine parameters directly to a run page.

 

NOTE: The machine monitor application replaces part of the Universal Performance Monitor in previous machines.

25.4-cm (10-in.) 4600 CommandCenter display25.4-cm (10-in.) 4600 CommandCenter display

The 4200 Processor is base equipment on all 6R Tractors. It offers:

  • Compatible with 21.3-cm (8.4-in.) touchscreen display
  • One video camera input
  • One USB input
  • AutoTrac capable (machine-specific activation sold separately)
John Deere 4200 CommandCenterJohn Deere 4200 CommandCenter

A. Next run page
B. Status center
C. Expand shortcut keys
D. Menu
E. Run page

 

Work monitor
Work monitor pageWork monitor page

The work monitor application displays the performance information about the task being performed by the machine. The user is shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage. The values of the work monitor can be reset by the user at any time. Specific values of the work monitor can be configured by the user to be shown on a run page.

 

NOTE: The work monitor application replaces part of the universal performance monitor in previous machines.

Video capability

 

Tractors with a 4200 CommandCenter are equipped with one video input and tractors with a 4600 CommandCenter have two video inputs. The operator has the ability to set a variety of triggers, including reverse, PTO, hitch, and selective control valve (SCV) levers to activate the camera. The image will then appear on the CommandCenter display. The camera (video observation system) is available through JD Parts and Ag and Industrial (A & I) Products.

 

John Deere Generation 4 CommandCenter processors

A Generation 4 CommandCenter is made up of a processor and a display. Two processor options are available for the Generation 4 CommandCenter.

The 4600 Processor is the premium processor. Available features with the premium processor include:

  • Compatible with 25.4-cm (10-in.) touchscreen display
  • Two video camera inputs
  • One USB input
  • AutoTrac capable (machine-specific activation sold separately)
Tractors4600 Processor4200 Processor
6ROptionStandard


Display options

Generation 4 CommandCenter displays are available in the following configurations:

  • 21.3-cm (8.4-in.) display on the 4200 CommandCenter
  • 25.4-cm (10-in.) display on the 4600 CommandCenter

For those wanting to maximize their viewing real estate, the 26-cm (10-in.) touchscreen color display is an excellent choice. With the 26-cm (10-in.) display, the title bar and all shortcut keys may be viewed at all times. Operators can monitor more items at once on the 26-cm (10-in.) touchscreen display.

 

John Deere 4600 CommandCenterJohn Deere 4600 CommandCenter

A. Next and previous run page
B. Status center
C. Shortcut keys
D. Menu
E. Run page
F. Title bar

Overview

To control a rear implement, up to six SCVs or five SCVs plus Power Beyond can be ordered (6145R-6250R). For (6110R- 6130R) up to five SCVs or four SCVs plus Power Beyond can be ordered. The SCVs can be controlled electrically. Up to four mechanical SCVs are available, in combination with Power Beyond. All mechanical or electrical SCVs feature four positions - neutral, raise, lower, and float.

Benefits

  • Release levers make disconnecting hydraulic hoses easy
  • Relocated valves improve operator's visibility to the rear hitch
  • Up to six rear SCVs give operators total flexibility

 

CodeDescriptionInformationAvailability
3312Two mechanical SCVs – premiumPremium couplers with high-pressure relief lever. Two mechanical SCVs 450 Series. Only in combination with PowrQuad™ Plus transmission or AutoQuad™ Plus transmission.
Only available on 6110R - 6130R.
6110R, 6120R, 6130R
3332Three mechanical SCVs - premiumPremium couplers with high-pressure relief lever. Only in combination with PowrQuad Plus or AutoQuad Plus.6110R, 6120R, 6130R, 6145R, 6155R, 6175R, 6195R, 6215R 
3311Two electronic SCVs - premiumPremium couplers with high-pressure relief lever.6110R, 6120R, 6130R
3331Three electronic SCVs - premiumPremium couplers with high-pressure relief lever.6110R, 6120R, 6130R, 6145R, 6155R, 6175R, 6195R, 6215R, 6230R, 6250R
3341Four electronic SCVs - premiumPremium couplers with high-pressure relief lever. 6110R, 6120R, 6130R, 6145R, 6155R, 6175R, 6195R, 6215R, 6230R, 6250R

NOTE: Not available for 6155RH.
3351Five electronic SCVs –  premiumPremium couplers with high-pressure relief lever. When ordered with right-hand console, (code 2055) also electrical joystick (code 841L) for operation of rear SCVs or electrical midstack SCV (code 8922, 8923, 8914 or 8915) is required. A maximum of four SCVs can be operated via paddle pot at right-hand console.6110R, 6120R, 6130R, 6145R, 6155R, 6175R, 6195R, 6215R, 6230R, 6250R

NOTE: Not available for 6155RH.
3361Six electronic SCVs – premiumPremium couplers with high-pressure relief lever. Not with right-hand console (code 2055). Not in combination with electrical joystick (code 841L) and any option with electrical joystick.6145R, 6155R, 6175R, 6195R, 6215R, 6230R, 6250R

NOTE: Not available for 6155RH.

 

Mechanical control valves

Overview

The tractor may be equipped with one type of mechanical control valves: premium (450 Series).

Premium-couplers control valves also have an additional lock function (position 3), which holds the control lever in the raise or lower position until the pressure in the oil circuit has reached a predetermined value (e.g., when the control cylinder has reached its end position).

 

In position 2, the control lever returns to neutral as soon as it is released and is the setting for normal hydraulic operation.

 

If an implement is connected, pressure connection has to be connected to the lower coupler. With standard SCVs, a valve prevents sudden loss of pressure caused by leakage when the engine is shut off.

 

On premium SCVs, the likelihood of leakage is further diminished.

Premium mechanical control valve (premium)Premium mechanical control valve (premium)
  1. Position 1
  2. Position 2
  3. Position 3
  4. Hydraulic oil flow control
Electrical control valves

Overview

The tractor may be equipped with the premium (450 Series) control valves. All main characteristics can be controlled by the CommandCenter™ display.

CommandCenter hydraulics optionCommandCenter hydraulics option
Example options of rear valve configuration
3351 –  five electronic SCVs (five SCV premium)3351 – five electronic SCVs (five SCV premium)
3361 – six electronic SCVs (six SCV premium)3361 – six electronic SCVs (six SCV premium)
Hydraulic control options
E-SCV controls on the right-hand consoleE-SCV controls on the right-hand console
M-SCV controls on the right-hand consoleM-SCV controls on the right-hand console
E- SCV controls on CommandARM™ controlsE- SCV controls on CommandARM™ controls
E-SCV controls on optional joystick (reconfigurable)E-SCV controls on optional joystick (reconfigurable)

Hydraulic set up

Shortcut button right-hand console

Overview

Simply push the hydraulic symbol on the right-hand side console or the CommandCenter and the CommandCenter display shows a setup menu to:

  • Monitor valve status - detent, float, or neutral
  • Adjust maximum flow and detent (combine for both direction or separate extent and retract adjustment)
Hydraulic shortcut button on right-hand consoleHydraulic shortcut button on right-hand console
Hydraulic shortcut button CommandCenterHydraulic shortcut button CommandCenter

Detent setup

Overview

  • Time detent - this is particularly useful when repeat SCV operations are performed, such as lowering a mower-conditioner plow or cycling planter markers.
  • Continuous flow detent - this is particularly useful when a hydraulic motor is used, such as on an air seeder.
Detent setupDetent setup

SCV flow setup

Overview

SCV flow rate can be programmed between 0.04 and 10 allowing fine tuning for implements with different hydraulic requirement.

Behavior can be set between linear (red), progressive (green), or a combination (yellow) for exact flow modulation and precise valve management.

  • Linear means that the distance travelled by the SCV/ICV corresponds to the distance travelled by the control lever/multifunction lever
  • Progressive means that initially the distance travelled by the SCV/ICV is less than that travelled by the control lever/multifunction lever (giving a more sensitive start to the movement)
Flow setupFlow setup
Three flow optionsThree flow options
Flow characteristic setupFlow characteristic setup

Combination is an intermediate stage between the two settings listed above.

Overview

ComfortView cabs feature a modern, automotive-style instrument panel as base equipment. The instrument pod has two large analog dials for engine and tractor speed, as well as two smaller dials that display fuel level, DEF level, and coolant temperature. The steering column and dash are adjustable to suit the operator's needs. The column tilts toward the operator and a lever on the left-hand side allows for the column to telescope out to the desired level.

 

A dimming mode automatically reduces the brightness of the instrument illumination when the tractor lights are used. 

Steering column control panel
Cab and controls 6R TractorCab and controls 6R Tractor
#

Instrumentation control panel

Overview

The instrumentation panel has a row of information and warning lights across the bottom to monitor all important tractor functions. A three-stage warning system first gives information, then gives warnings, and finally, gives a stop alarm to prevent damage from occurring in the event of a component malfunction. An integrated power take-off (PTO) over-speed warning is incorporated into the diagnostics to ensure proper operation.

Instrumentation control panelInstrumentation control panel
#

Dash instrument panel controls include:

Left sideRight side
Left-hand reverserTwo-speed and optional intermittent wiper
High-/low-beam switchKey start/stop
Hazard switchRoad/work lights on/off
Turn signals/horn 
In-cab storage
Overhead storage compartmentOverhead storage compartment
Right-hand console controls

Overview

The right-hand control console is angled for operator comfort and ease of operation. The design of the right-hand console is controlled by the type of SCVs chosen.

Mechanically actuated valves are controlled by traditional levers, while electronically actuated valves are controlled by fingertip paddle pods. Controls for the ComfortView cab are grouped by function on the right-hand console.

The modular console panel provides individual access to hand throttle, transmission controls, MFWD switch (if equipped), hitch command console, load/draft control, SCV, and PTO controls.

The console is also the location of the CommandCenter. The CommandCenter allows the operator to customize important tractor functions.

This option requires a PowrQuad™ or AutoQuad™ transmission.

ComfortView cab right-hand console (AutoQuad transmission is shown)ComfortView cab right-hand console (AutoQuad transmission is shown)
Hitch control module on right-hand consoleHitch control module on right-hand console
M-SCV controls on the right-hand consoleM-SCV controls on the right-hand console
E-SCV controls on the right-hand consoleE-SCV controls on the right-hand console

Benefits

  • Ergonomic placement of controls to match arm movements
  • Integrated hitch control module with draft wheel
Cab packages for 6155RH

 

Cab packagesEconomy
right-hand console 
Standard
right-hand console
Premium right-hand consolePremium
right-hand console
cab suspension
Package code

2051

2061

2065

2069

One panorama door (left hand only)

X

X

  
Two panorama doors (left-hand and right-hand sides)  

X

X

Air seat (Sears)

X

X

X

 
Deluxe air seat (Grammer® DDS)   

X

Instructional seat 

X

X

X

Bottle holder 

X

X

X

Mirrors - right hand and left hand - manually adjustable and telescopic

X

X

  
Wide-angle mirrors - right hand and left hand - electrically adjustable  

X

X

Front sun visor

X

X

  
Front and rear roller blind  

X

X

Rear wiper and washer 

X

X

X

Manual temperature controls

X

X

  
Automatic temperature controls  

X

X

Hydraulic cab suspension   

X

*NOTE: 6155RH right-hand console only


Grammer is a trademark of Grammer Aktiengesellschaft Joint Stock Company.

Overview

John Deere 6R Series Tractors feature the reliable and proven PowerTech PVS 6.8L and PSS 4.5L and 6.8L engines. These air-to-air aspirated engines deliver a power bulge above rated power to provide excellent torque in demanding applications.

Key features:

  • Series turbochargers (PSS only)
  • Variable geometry turbocharger (VGT)
  • Air-to-air after cooling
  • High-pressure common rail (HPCR) fuel system
  • Engine control unit (ECU)

PowerTech PSS/PVS engine identification

 

After treatment

  • S – Exhaust filter and selective catalytic reduction (SCR)
  • X – Exhaust filter

Turbocharger

  • V – VGT
  • S – Series turbochargers
  • W – Wastegate turbocharger

Technology

  • P – PowerTech Plus
  • E – PowerTech E
PowerTech PSS 6.8L enginePowerTech PSS 6.8L engine
#

Benefits

  • A constant power range of 2100 rpm down to 1500 rpm
  • Power bulge of 10 percent
  • Greater tractor productivity
  • Responsive power reducing the need to downshift the transmission

Details

To match the engine power characteristics and improve the operation economy of the machine, the rated engine speed is 2100 rpm.

Series turbochargers

Overview

The PowerTech PSS 4.5L and 6.8L utilizes two turbochargers – a VGT and a fixed geometry turbocharger, providing the torque rise and engine response needed to meet varying load conditions.

Fresh air is first drawn into the low-pressure fixed geometry turbocharger and compressed to a higher pressure. The compressed, higher pressure air is then drawn into the high-pressure VGT, where the air is further compressed. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds.

PowerTech PSS engine series turbochargersPowerTech PSS engine series turbochargers
#

Benefits

  • Deliver high power density
  • More low-speed torque and responsiveness to meet varying load conditions

VGT

Overview

The VGT is electronically controlled and actuates the turbo vanes as required to maintain peak engine performance.

The turbocharger’s vanes are in the exhaust flow. The opening or closing of the vanes changes the outlet volume and airflow speed against the turbocharger turbine. When exhaust flow is low, the vanes are partially closed. This partial closure increases the pressure against the turbine blades to make the turbocharger spin faster and generate more boost pressure.

The ability to keep the airflow at optimum levels provides more consistent engine boost pressure and the ability to respond to load quickly across the entire engine rpm range. This system is without the turbo lag that can be found on some engines.

PowerTech VGTPowerTech VGT
#

Benefits

  • Increased low rpm torque 
  • Quicker response to load
  • Increased peak torque
  • Improved fluid economy
  • Improved performance at high altitudes

Air-to-air after cooling

Overview

Air-to-air after cooling lowers the intake manifold air temperature and provides more efficient cooling while reducing cylinder firing pressure and temperatures for greater engine reliability. Since lower temperature air is denser, a higher volume of air flows into cylinders so the engine is capable of meeting the increasing horsepower demands. Lowering the intake manifold and cylinder temperatures also aid in lowering the combustion temperature, which lowers the NOx produced as a result.

Benefits

  • Higher horsepower
  • Less NOx production

HPCR fuel injection system

Overview

Every PowerTech PSS 4.5L and 6.8L engine utilizes a HPCR fuel system to efficiently supply fuel to injectors. The high-pressure fuel pump instantly responds to requirements for more or less fuel flow or pressure. This electronically controlled, high-pressure pump delivers pressure on demand according to the application requirements. Pressure on demand ensures an efficient injection system resulting in high-injection pressure independent of engine speed.

High-pressure common railHigh-pressure common rail
#

Benefits

  • Instantly respond to load changes reducing the need to change gears
  • Improved fluid economy

Engine control unit (ECU)

Overview

The ECU uses signal inputs from sensors and pre-programmed performance modeling to control critical engine functions such as fuel quantity, injection timing, air-to-fuel ratio, multiple fuel injections, amount of cooled exhaust gas recirculation (EGR), and a host of other control parameters.

ECUECU
#

Benefits

  • Optimized fluid economy
  • Maximum engine performance

Details

Each injector is controlled individually by the ECU. The ECU turns the injector on and off during each firing cycle to control the fuel delivery into each cylinder.

Load and speed sensing allows each cylinder’s fuel delivery rate to be adjusted independently at the individual injector. With each injection cycle, the ECU can make the following adjustments on the go:

  • Number of injections
  • Fuel pressure in the common rail
  • Start of injection
  • Duration of injection

This management system is connected to the transmission, allowing the engine and transmission to respond simultaneously.

Cold weather and high-altitude compensation are also precisely controlled for quality starts regardless of weather and maximum performance at high elevations. The ECU also features improved diagnostic capabilities. It is faster, has more working memory, and is responsible for monitoring and executing all aspects of the Integrated Emission Control System.

Overview

Lights on the 6R Series Tractors have been positioned and designed to provide maximum visibility to the front, sides, and rear of the tractor to increase productivity in any operating condition. The cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees, for completely programmable, 360-degree, stadium-style lighting.



Base lighting

  • Two HB3 hood road lights - low beam (A)
  • Two HB3 hood road lights - high beam (B)
  • Two HB3 hood outer work lights (C)
  • Two H4 belt-line lights (F)
  • Four HB3 halogen inner front-roof-mounted adjustable work lights (H and I)
  • Two HB3 halogen inner rear-roof-mounted adjustable work lights (N)
  • Brake lights rear fender mounted (R)

 

 

Code

Hood

Belt

Front roof

Side

Rear roof

Fender

  

A

B

C

E

F

G

H

K

I

L

N

O

P

R

* Base package - with non-panorama roof HB3HB3HB3NAH4XHB3 HB3 HB3X HB3
Light package - Standard873FHB3HB3HB3NAH4XHB3XHB3HB3HB3XHB3HB3
Light package - Premium873EHB3LEDLEDNALEDXLEDXLEDLEDLEDXLEDHB3
Light packages panorama roof code (878W)               
Light package - Standard - panorama roof873AHB3HB3HB3NAH4XLEDX HB3HB3XHB3HB3
Lighting package – Panorama light package873CHB3LEDLEDNALEDXLEDX LEDLEDXLEDHB3


Light-emitting diode (LED)
High-intensity discharge/Xenon (HID)
Halogen (HB3)

Lighting identification from front view of tractorLighting identification from front view of tractor
Lighting availability on panorama roofLighting availability on panorama roof
Lighting identification from rear view of tractorLighting identification from rear view of tractor

NOTE: Please also see available attachments.

Selecting the lighting mode

Overview

Operators can quickly select a lighting mode on the steering console by operating a rotary switch. The three settings available are:

  1. Light switch in the off position
  2. Headlights in road mode
  3. Headlights and work lights in field mode (depending on CommandCenter™ display assignments)
Lighting control switch on dashboardLighting control switch on dashboard

Benefits

  • Easy to locate and operate
  • Small and compact design

Programmable lighting

Overview

The CommandCenter allows operators to customize two different light programs. The operator can switch between the two programs with the push button. Also standard on the 6R Tractors is the battery power-saver feature. When the engine is off and the outside lights have been left on, this feature is designed to avoid battery run-down. After the lights have been left on for 30 minutes and the key is in the off position, the lights will cycle, or blink on and off, five times as an alert. The lights will continue to illuminate for one more minute and then automatically shut off to protect the battery.

CommandCenter programmable timeout lightingCommandCenter programmable timeout lighting
CommandCenter programmable lights pageCommandCenter programmable lights page
Beacon lights/hazard warning lights, work light 1 and 2 location on right-hand consoleBeacon lights/hazard warning lights, work light 1 and 2 location on right-hand console
Beacon lights/hazard warning lights, work light 1 and 2 location on CommandCenterBeacon lights/hazard warning lights, work light 1 and 2 location on CommandCenter

Benefits

  • The John Deere light programming adds high performance to the operator.
  • Individual light selection adds to high operator performance to prevent blinding other operators when two machines are working close to each other.
  • Improved uptime due to 360-degree lighting.

More lighting information

Overview

Optional LED lighting technology provides better depth perception and pattern recognition as well as a natural low temperature light for excellent definition of the field. One LED light will out-live 200 or more incandescent lights, 55 or more halogen lights, and 14 or more HID lights.

Beltline and rear fender work lights

Overview

Beltline and rear fender work lights provide options for full light flexibility, giving flood illumination exactly where the operator needs it. The John Deere beltline lights are available with HB3 work lights and LED work lights. The two rear fender lights are available in HB3 or LED.

The John Deere lighting components have undergone numerous vibration testing procedures to ensure a good lighting performance and sturdiness under all conditions.

All work lights and beltline lights are adjustable to a desirable angle.

Two beltline work lights - LED
Two beltline work lights – LEDTwo beltline work lights – LED

Benefits

  • Less eyestrain on approaching traffic when traveling on the road.
  • Saves the operator on service time and money and minimizes downtime.
  • The LED bulbs and diodes have an outstanding operational lifetime to last the tractor's full running lifetime, thus giving the operator greater uptime.

Details

  • Mounted at beltline at front of cab.
  • No hanging work lights are possible. Not in combination with second beltline lights (873M and 873O).
CodeDescription 
873CPart of Premium panorama roof light package

873E

Part of Premium light package


NOTE: Please also see available attachments.

Two rear fender work lights – HB3
Two rear fender work lights – HB3Two rear fender work lights – HB3

Benefits

  • The two rear HB3 work lights, ensure good performance for the cost-sensitive producer.

NOTE: These lights should not be operated during road transport.

 

CodeDescription
873APart of Standard panorama roof light package 
873FPart of Standard light package

 

NOTE: Please also see available attachments.

 

Beacon light for added visibility

Overview

A beacon light is mounted on the front of the cab to provide a rotating warning light for road traveling and added visibility.

Two beltline lights - H4
873M - Two beltline lights – H4873M - Two beltline lights – H4

Benefits

  • The two beltline lights provide greater illumination toward the front wheels of the tractor.

Details

  • Mounted at beltline at front of cab
  • No hanging work lights are possible. Not in combination with second beltline lights (code 873M and 873O).

 

CodeDescription
873APart of Standard panorama roof light package 
873FPart of Standard light package

 

NOTE: Please also see available attachments.

Two rear fender work lights – LED
Two rear fender work lights – LEDTwo rear fender work lights – LED

Benefits

  • The John Deere lighting components have undergone numerous vibration testing procedures to ensure a good lighting performance and sturdiness under all conditions.
  • The LED rear fender light adds extra lighting when operating implements close to the ground.

NOTE: These lights should not be operated during road transport.

 

CodeDescription
873CPart of Premium panorama roof light package 
873EPart of Premium light package

 

NOTE: Please also see available attachments.

Beacon lightBeacon light

Benefits

  • To warn other road users of the presence of a large machine on the road.
  • Easily removed with no tools required when approaching height restricted areas.
  • Waterproof to ensure good performance when required.
  • The beacon has a degree of flexible movement, are not completely static, and can withstand the impact of objects such as tree branches.

Details

  • Front cab is roof mounted.
CodeDescription
873APart of Standard panorama roof light package
873CPart of Premium panorama roof light package
873FPart of Standard light package
873EPart of Premium light package

Specifications


Accessories and Attachments

Automation

Cab Equipment

Additional Inner Mirror for Hitch View - BL15087

Bottle-/ Cup-Holder - BL15522

Decal JD-Logo In Rear Window - AL208657

Field Office
Field Office shown in 6030 Premium Series TractorField Office shown in 6030 Premium Series Tractor
Field Office shown in 6030 Premium Series TractorField Office shown in 6030 Premium Series Tractor

The Field Office for ComfortGardTM cab tractors is designed to store a laptop computer, cellular phone, papers, calculators, writing utensils, and many other small items. By providing a complete office away from the home, this unit improves efficiency in managing farm operations.

 

The lid is a flat surface, and it provides an ideal place for writing. The entire Field Office is removable, so it can go with operators wherever they desire. The Field Office base is equipped with a three-pin electrical power source, unless ordered with the optional refrigerator (6030 Premium Series only).

The handle locks the case in position, and an optional cup holder is incorporated into the Field Office base.

For 6030 Series Premium Cab Tractors, the Field Office can be ordered with an optional refrigerator, both as a field-installed attachment and as a factory-installed option.

NOTE: Field Office with cup holder is not compatible with the instructional seat. Due to the special configuration of low-clearance cab tractors, this attachment will not be factory-installed.
Field Office
Field Office shown in 6030 Premium Series TractorField Office shown in 6030 Premium Series Tractor
Field Office shown in 6030 Premium Series TractorField Office shown in 6030 Premium Series Tractor

The Field Office for ComfortGard™ cab tractors is designed to store a laptop computer, cellular phone, papers, calculators, or writing utensils and many other small items. This unit makes a complete office away from the home to improve efficiency in managing farm operations.

 

The lid is a flat surface, and it provides an ideal place for writing.  The entire Field Office is removable, so it can go with the operator wherever they desire, and the Field Office base is equipped with a three-pin electrical power source, unless ordered with optional refrigerator (6030 Premium Series only).

The handle locks case in position, and an optional cup holder is incorporated into the Field Office base.
For 6030 Series Premium Cab Tractors, the Field Office can be ordered with an optional refrigerator, both as a field-installed attachment, and as a factory-installed option.

NOTE: Field Office with cup holder is not compatible with the instructional seat. Due to the special configuration of low-clearance cab tractors, this attachment will not be factory-installed.

Preparation For Tachograph - BL15141

Rear Window, Heatable - AL205891

Refrigerator - BL15028

Refrigerator with Field Office - BL15029

Sun Shade Front / Rear / Side - AL205893

Cab Equipment

Accessory Mounting Bracket - BL15042

Beverage Holder for Storage Net Holder - AL207633

E-ICV Joystick, Command Arm - BL15368

E-ICV Joystick, Gearshift, Armrest (Grammer) Mounted - BL15916

E-ICV Joystick, Gearshift, Armrest (Sears) Mounted - BL15917

Inner Rear View Mirror - BL16005

Lever (Multifunctional) SCV Position 3 and 4, GSS - BL15617

Monitor Bracket On C-Post - BL16101

Sun Visor - AL205892

Wiper Rear - BL15382

Cold Start Packages

Cold Start Package - BL15473

Cold weather start aids

The optional cold-start packages are recommended for producers who frequently start tractors below -6 degrees Celsius (20 degrees Fahrenheit).

Cold Start Package - BL15469

Cold Start Package - BL15470

Cold Start Package - BL16189

Cold Start Package - BL16190

Cold Start Package - BL16191

Cold Start Package - BL16192

Cold Start Package - BL16193

Cold Start Package Preparation - BL16194

Creeper Cab Parts - AL205866

DEF-Tank Filler Neck Heater - BL15537

Cold Start Packages

Display

Bracket For Displays / Implements Controls - BL15157

Wiring Harness For Isobus Preparation (E.G. iTEC) - BL15586

Drawbar

Drawbar

Electrical Equipment

110V AC Power Outlet Socket, Single Phase - BL15805

Automatic Battery Cut-Off System - BL15993

Multiple Socket Strap With 7 Pin Signal Socket - BL15389

Multiple Socket Strap With 7 Pin Signal Socket Premium Plus - BL15391

Multipower Outlet - BL15392

Parts for Radar Sensor - AL204831

Power Outlet, C-Post, SAE - AL205868

Exhaust

Front Axle

Low Temperature Attachment For TLS - BL15180

Low Temperature Attachment For TLS - BL15201

Front Fenders

2 Front Fenders, 370 mm Width (Regular) - BL16052

2 Front Fenders, 420 mm Width (Regular) - BL16054

2 Front Fenders, 540 mm Width (Regular) - BL16058

Fender Stop Panel, Loader Prep. - BL15125

Front Fenders, 480 mm Width (Regular) - BL16056

Front Fenders

2 Front Fenders, 370 mm Width (Large) - BL16053

2 Front Fenders, 420 mm Width (Large) - BL16055

2 Front Fenders, 480 mm Width (Large) - BL16057

2 Front Fenders, 540 mm Width (Large) - BL16059

2 Front Fenders, 620 mm Width (Large) - BL16060

Front Hitch

2 Additional Front SCV, Basic Front Hitch - BL16012

Comfort Hitch, Diverter Option - BL16018

Rear View Wide Angle Mirror, Heatable, Adj., Telesc., RH, LH - BL15900

Front Loader Equipment

Front Loader Preparation

EL. Midstack Valve, 2 FCT, Attachment For Comfort Front Hitch - BL15945

EL. Midstack Valve, 2 Function - BL15949

EL. Midstack Valve, 3 Function - BL15950

El. Midstack Upgrade Kit from 2 to 3 Valve Sections - BL15944

Lever M-ICV, 3 Function, DIV + GSS - BL15620

Mech. Midstack Upgrade Kit from 2 to 3 Valve Sections - BL15464

Midstack Valve, 2 Function - BL15570

Midstack Valve, 3 Function - BL15571

Oil Lines, ICV - BL15589

Front Power Take-Off (PTO)

Front Weights

Fuel Tank

Bottom Guard, Fuel Tank - BL15554

Bottom Guard, Fuel Tank - BL15553

Heater And Air Conditioning

Lighting

1 Work Light H3, On Beacon Light Bracket - AL205916

2 Headlights H4, Beltline Mounted (Upright Position) - AL205881

2 Led Working Lights, Rear Fender-Mounted - BL15718

2 Work Lights Front Roof Mounted - BL15844

2 Work Lights HB3, Roof Mounted, Adjustable, Front or Rear - AL205913

2 Work Lights LED, Roof Mounted, Adjustable - BL15717

2 Work Lights Roof Mounted, HB3, Fixed, Side - AL205912

2 Work Lights, Roof Mounted,LED,Front or Rear - BL15999

2 Working Lights HB3, Fender-Mounted, Rear - AL204759

2 Working Lights LED, Beltline-Mounted - BL15719

Beacon Light, on Left Side of Cab-Roof - AL204758

Beacon Light, on Right Side of Cab-Roof - BL15022

Lighting

Bracket For Installation Of Headlights And Work Lights - BL15243

Extremity Light Preparation Kit for North America - AL204476

Instalation Brackets for Headlight and Work Lights - AL205884

Miscellaneous

Miscellaneous

Latch, Vandal-Kit, Transmission Oil Filler Neck - BL15869

Lockable Filler Cap DEF-Tank - AL211572

Lockable Filler Cap Fuel Tank - AL213203

Security Door Lock Kit - BL15804

Operator's Station

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.

 

Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.

Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount
Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mount

RAM is a trademark of National Products Inc.

CommandARM bracketCommandARM bracket
CommandARM bracketCommandARM bracket

The CommandARM bracket for Final Tier 4 (FT4) tractors offers a convenient way to mount a cell phone or tablet to the CommandARM for easy use of a mobile device. This bracket is not compatible with joystick-equipped tractors.

 

NOTE: Cell phone, tablet, and Ram mount hardware sold separately.

 

NOTE: This bracket is not compatible with joystick-equipped tractors.

Tablet Mount Kit - BRE10255

Pick-up Weights

Radio

Radio Deluxe with CD - BL15387

Radio Premium for Region 4 - BL15388

Rear Fenders

Rear Fenders

Rear Hitch

#

This kit provides additional (premium upgrade) controls for operating the rear hitch from the operator's seat.

Rear Hitch Equipment

Center Link, Hook ASSY., CAT 3, With Ball - BL15052

Holder For Hitch Cable (Rope) - AL81619

Rear Power Take-Off (PTO)

Rear Wheel Weights

Adapter for Rear Wheel Weights Quick Mount, BCD = 275 - BL15909

Rear Wheel Weights Quick Mount, 2x100 Kg - BL15892

Rear Wheel Weights Quick Mount, 2x250 Kg - BL15893

Rear Wheel Weights

Seat

Backrest Extension for Operator Seats - AL204297

Comfort Seat - Air Suspended - BL15037

Instructional Seat - BL15226

Super Comfort Seat - BL15038

Super Comfort Seat - BL15727

Ultimate Seat - BL15954

Ultimate Seat - BL15955

Selective Control Valves

Additional Hydraulic Oil Reservoir - BL15504

Free Oil Return, ISO 17567-Class 2 - BL15433

Free Oil Return, Size 20 - BL15436

Implement Side, Flat Face Coupler Drain Case, Size 10, ISO 16028 - BL15813

Implement Side, Flat Face Coupler PB, Size 20, ISO 16028 - BL15812

Power Beyond Connectors, ISO 17567 - BL15432

Power Beyond Connectors, Size 12,5 - BL15435

Power Beyond Connectors, Size 20 - BL15434

Power-beyond couplersPower-beyond couplers

Field-installed kit AL176299 provides like hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.

 

Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.

Selective Control Valves (SCVs)

E-SCV, 450 Series, POS. 3 - BL15963

E-SCV, 450 Series, POS. 4 - BL15964

E-SCV, 450 Series, POS. 5 - BL15965

E-SCV, 450 Series, POS. 6 - BL15966

E-SCV, 450 Series, POS. 6 W/ Comfort FH Valve POS. 5 - BL15967

Lever SCV Position 3 - BL15615

Lever SCV Position 4 - BL15616

M-SCV 200 or 450 Series Pos. 3 - BL15563

M-SCV, 200 Or 450 Series POS. 4 - BL15564

Stabilizer

Hydraulic Sway Control Bar - BL15581

Stabilizer barStabilizer bar
Automatic stabilizer barAutomatic stabilizer bar

Factory-installed stabilizer bars are recommended for applications such as scraping where high lateral load forces are placed on the hitch. Stabilizer bars work to prevent breakage of lower link sensors. When ordered, regular sway plates and blocks will not be installed.

 

An adjustable stabilizer bar provides positive control of lateral sway when using mounted equipment.

 

For those who desire both left-hand and right-hand stabilizers, order quantity of two or code 8763.

Transmission

Transmission backup alarm kit on 6030 SeriesTransmission backup alarm kit on 6030 Series

To better accommodate governmental or commercial sales, a back-up alarm is available as a factory- or field-installed attachment on select models. An alarm sounds whenever the transmission is placed in reverse providing a high level of warning that the tractor is changing direction.

Transmission

Wheels and Tires