Operators can add the optional 35.56-cm (14-in.) diameter rolling basket to help break up clods for improved levelness and uniformity of field finish. A wrench can be used to adjust the down pressure of the rolling basket to suit the operator’s needs.
A two-blade taper furrow filler on the outside rear wing reduces outside ridges and smooths out the soil to create a level soil surface.
Disk gangs are easily adjustable to match changing soil conditions with Frontier™ disk harrows.
Use a more aggressive angle to tear up and penetrate high residue and soil. Reduce the angle for a smoother finish.
Choose notched or spherical blades with cast spools for the Frontier™ DH15 and DH16 Series Disk Harrows.
Notched blades aggressively cut and mulch, while spherical (smooth) blades slice and mix residue for a smoother finish.
There are three blade configurations:
Crank adjustment for front-to-rear leveling on the Frontier™ disk harrow lets the operator easily fine-tune disk leveling to avoid ridges and valleys in varying soil types and field conditions.
The working depth is controlled with the depth control bar. Simply lock the pin in one of the seven positions for the working depth required.
The middle breaker cuts out the center bulk for a more level soil profile, ensuring complete coverage on each pass.
The Frontier™ DH15 Series Disk Harrow hydraulic controls let the operator raise and lower the disk while on the go. Safety chains come standard with all models.
The scraper kit for furrow fillers – two per kit – removes soil buildup from furrow fillers in wet, sticky soil types.
The scraper kit removes soil buildup from disk blades in wet, sticky soil types.
Furrow filler field-installed kits provide an additional smaller-diameter disk blade to the outside of each rear gang, helping to fill in the furrow left by the outermost disk blade.
The middle breaker removes the center balk of dirt left between the front disk gangs.
Compare the specifications of up to 4 models
|Type||Level lift drawn with clevis|
|Quick coupler compatibility|
|Type||Notched (front) / Notched (rear)|
Smooth (front) / Smooth (rear)
Notched (front) / Smooth (rear)
Weight per blade: 68-76 kg
|Front||5, 8, 9, 11, 13, 14, 16, 18, 19, 22, 25 degree (angle)|
|Rear||5, 8, 10, 12, 13, 14, 16, 17, 19, 20, 21, 24 degree (angle)|
|Frame||101.6x101.6x6.4 and 152.4x101.6x6.4 mm|
4x4x0.25 and 6x4x0.25 in.
|Material||Steel (Rigid Standard - C-Spring Optional)|
|U-bolt size||19.1 mm|
|Bearing type||Lubricated ball bearings|
|Lighting and safety|
|Cylinder size||10.1x20.3 cm|
|Hose length||406 cm|
|Size||Dual 9.5L-15 6 ply|